Area-oriented coordinated trajectory planning of dual-arm space robot for capturing a tumbling target

The growing amount of space debris poses a threat to operational spacecraft and the long-term sustainability of activities in outer space. According to the orbital mechanics, an uncontrolled space object will be tumbling, bringing great challenge to capture and remove it. In this paper, a dual-arm coordinated ‘‘Area-Oriented Capture"(AOC) method is proposed to capture a non-cooperative tumbling target. Firstly, the motion equation of the tumbling target is established, based on which, the dynamic properties are analyzed. Then, the ‘‘Area-Oriented Capture"concept is presented to deal with the problem of large pose(position and attitude) deviation and tumbling motion. An area rather than fixed points/devices is taken as the object to be tracked and captured. As long as the manipulators' end-effectors move to a specified range of the objective areas(not fixed points on the target, but areas), the target satellite will be hugged by the two arms.At last, the proposed method and the traditional method(i.e. fixed-point oriented capture method)are compared and analyzed through simulation. The results show that the proposed method has larger pose tolerance and takes shorter time for capturing a tumbling target.     

Predicting lean blow-off of bluffbody stabilized flames based on Damköhler number

Lean Blow-Off(LBO) prediction is important to propulsion system design. In this paper,a hybrid method combining numerical simulation and Da(Damk?hler) model is proposed based on bluffbody stabilized flames. In the simulated reacting flow, Practical Reaction Zone(PRZ) is built based on OH radical concentration, and it is considered to be the critical zone that controls LBO.Da number is obtained based on the volume-averaged parameters of PRZ. The flow time scale(s_f)indicates the residence time of the fresh mixture flowing through the PRZ. It is obtained based on the characteristic length and volume-averaged axial velocity of the PRZ. The chemical time scale(s_c) indicates the shortest time needed to trigger the reaction of the mixture. It is obtained by commercial software CHEMKIN through monitoring the transient variation of the reactor temperature. The result shows that the average Da number under different LBO conditions is 1.135(the Da number under each LBO condition ranges from 0.673 to 1.351). This indicates that the flow time scale and chemical time scale are comparable. The combustion is in a critical state where LBO is easy to occur. With the increase of the fuel mass flow rate(the global fuel/air ratio increases from 0.004761 to 0.01095), s_f increases from 0.001268 s to 0.007249 s, and s_c decreases from 0.00124 s to0.00089 s. Accordingly, Da number increases from 1.023 to 8.145, which shows that the combustion becomes more stable. The above results show that the method proposed in the present study can properly predict the LBO limits of combustors, which provides important technical supports for combustor design and optimization.     

仅用作航空器追踪的北斗机载设备适航要求分析

北斗卫星导航系统（简称北斗）在民用航空器中安装应用的前提是明确和符合北斗机载设备的适航要求。但由于全球定位系统（GPS）与北斗在星座结构、信号体制及功能上的不同，导致目前国际上全球卫星导航系统（GNSS）相关适航标准不适用于北斗设备。标准的缺失严重制约北斗民航产业发展，急需进行自主研究与制定。针对北斗在民用航空器中应用第一阶段的功能及场景，即仅用作航空器追踪，分析当前可参考标准的适用性，明确适航要求的制订策略及框架，综合考虑适航安全性、民航对北斗机载设备的紧迫需求，未来机载设备的发展方向，以及当前工业水平，提出一套仅用作航空器追踪的北斗机载设备适航要求，形成审定要素及评审要求，可支持工业方对适航标准的理解。     

GEO长寿命卫星热管在轨等温性能分析

热管是GEO长寿命卫星热控设计大量使用的重要传热元件，其在轨等温传热性能是影响卫星安全可靠工作的关键因素。针对中国在轨长期稳定运行的GEO长寿命卫星热管，基于热管在轨温度遥测数据，采用数理统计方法分析热管在轨等温性能随时间的实际变化规律，分析表明：GEO长寿命卫星热管在轨等温性能稳定性良好，等温性受热管自身温度水平影响较大，年周期内呈现季节性变化，全寿命周期内随飞行时间推移呈现性能衰减下降趋势，寿命末期等温性优于1.6℃，并从热管设计、热负荷大小与分布、使用环境等方面进行等温性改进分析及应用建议。     

配置点谱方法求解非均匀介质内辐射传热问题

发动机内的燃气等高温介质随着组分和浓度的变化，会引起折射率在空间上的非均匀分布，从而导致辐射能束沿着曲线传播，其相应的辐射传热过程也更为复杂。为了避免射线追踪方法的复杂计算、提高计算效率，本文提出了配置点谱方法求解二维非均匀介质内辐射传热问题。在求解过程中，角向采用离散坐标法处理，空间采用配置点谱方法处理。通过将三种非均匀介质内辐射传热问题的配置点谱方法结果与文献结果进行对比分析，发现配置点谱方法可以在较少的节点数下，获得准确、有效地计算结果。并且，采用配置点谱方法求解三种算例的计算时间均消耗较少，均在20分钟以内。这将为进一步开展发动机复杂结构内高温燃气辐射快速仿真提供基础。     

多孔介质冷却通道在燃烧室中的应用

为了探索多孔介质冷却通道在液体火箭发动机燃烧室中的应用,采用金属粉末烧结法制备了多孔介质,设计了多孔介质通道的流阻和传热特性测试装置,建立了采用多孔介质冷却通道的燃烧室传热预测模型,对具有不同结构参数的多孔介质进行了研究。结果表明:随着孔隙率的增大,多孔介质通道的流阻逐渐减小,换热能力逐渐下降;基于传热模型的预测结果与试验有一定偏差,最大达到25%;相较铣槽通道,多孔介质冷却通道能够在燃烧室中获得更好的热防护效果。     

Macrosegregation during crystal growth in horizontal bridgman boat

This paper is devoted to direct numerical simulation of the fluid flow and macrosegregation in horizontal Bridgman systems. Results concerning the fluid flows at Pr=0 and Pr=0.015 are given for various values of Gr and in situation where the melt-crystal interface is at rest. Practical laws concerning the behaviour of the mass transport and the level of inhomogeneity in the cavity are derived. The effects of some parameters such as Gr, Sc and the pulling speed on the concentration repartition in the two phases melt and crystal are studied and the average concentration in the crystal is shown for various situations.     

基于MRPⅡ思想的库存管理系统及算法研究

制造资源计划(MRPⅡ)是一种先进的管理思想,如何在国内企业成功应用是当前需要深入研究的问题.根据国内航空企业管理模式的实际现状,确定了建立适合企业实际的先进库存管理系统的目标,并给出了需求分析、系统设计,等等;阐述了系统结构和功能,探讨了关键技术和算法思想.