湿度传感器能力验证活动误差来源分析

本文主要阐述了本实验室在参加由CNAS组织的湿度传感器能力验证活动中,当最终结果报告中出现临界值情况时,应采取的措施:包括分析误差的主要来源,制定相应的纠正措施,并验证结果的过程。     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

Mo M-PO/SBR Algorithm Based on Collaborative Platform and Mixed Model

For electromagnetic scattering of 3-D complex electrically large conducting targets,a new hybrid algorithm,Mo M-PO/SBR algorithm,is presented to realize the interaction of information between method of moment(Mo M)and physical optics(PO)/shooting and bouncing ray(SBR). In the algorithm,the COC file that based on the Huygens equivalent principle is introduced,and the conversion interface between the equivalent surface and the target is established. And then,the multi-task flow model presented in this paper is adopted to conduct CPU/graphics processing unit(GPU)tests of the algorithm under three modes,i.e.,MPI/Open MP,MPI/compute unified device architecture(CUDA) and multi-task programming model(MTPM). Numerical results are presented and compared with reference solutions in order to illustrate the accuracy and the efficiency of the proposed algorithm.     

基于STM32的视频流图像更新方法的研究

对基于STM32系统低速(工作主频72MHz)视频流处理显示更新方案的研究。结合图像处理基本理论,分析传统的显示方法的不足,并提出一种新的视频流图像更新的方法,通过一定的实验数据和理论结果,验证该方法可行性。     

An Improved Nonlinear Dynamic Inversion Method for Altitude and Attitude Control of Nano Quad-Rotors under Persistent Uncertainties

Nonlinear dynamic inversion(NDI)has been applied to the control law design of quad-rotors mainly thanks to its good robustness and simplicity of parameter tuning.However,the weakness of relying on accurate model greatly restrains its application on quad-rotors,especially nano quad-rotors(NQRs).NQRs are easy to be influenced by uncertainties such as model uncertainties(mainly from complicated aerodynamic interferences,strong coupling in roll-pitch-yaw channels and inaccurate aerodynamic prediction of rotors)and external uncertainties(mainly from winds or gusts),particularly persistent ones.Therefore,developing accurate model for altitude and attitude control of NQRs is difficult.To solve this problem,in this paper,an improved nonlinear dynamic inversion(INDI)method is developed,which can reject the above-mentioned uncertainties by estimating them and then counteracting in real time using linear extended state observer(LESO).Comparison with the traditional NDI(TNDI)method was carried out numerically,and the results show that,in coping with persistent uncertainties,the INDI-based method presents significant superiority.     

LENS风洞试验返回器模型气动热特性模拟

国家数值风洞高超声速流动模拟软件HyFLOW的研制对打破国外同类软件的技术壁垒具有重要意义。与国外DPLR软件进行了对比研究，同时系统介绍了HyFLOW软件求解器的数值方法、物理化学模型以及壁面催化特性计算模型等主要方法，采用典型算例对有限催化模型进行了数值验证，最后基于LENS风洞试验146 mm返回器标模外形开展了高超声速气动热特性数值模拟。研究结果表明，HyFLOW软件在高超声速热化学非平衡流动模拟与评估方面的气动力计算精度高，与国外同类软件DPLR相当，同时其壁面催化条件下的气动热计算精度可靠，可信度高。     

翼吊发动机安装结构等效建模及其隔振设计

为了研究翼吊发动机安装结构隔振特性并优化其隔振器设计,建立了发动机安装节-吊架-机翼结构理论分析及有限元模型.利用有限元方法进行了模态验证并分析了安装结构的隔振特性.进行发动机3种典型工况下的结构动响应分析确定了振动传递的主路径.基于振动传递路径法研究了隔振器参数和安装位置对安装系统隔振性能的影响规律.结果表明:振动载荷经安装结构后低压转子转频和高压转子转频峰值响应分别降低22.03%和14.65%.低压转子转频振动传递主路径为发动机-前安装节-吊架-机翼,高压转子转频为发动机-后安装节-上连杆-机翼.通过合理设置隔振器位置可以使安装系统隔振率达到50.41%,隔振器的频率比为5和阻尼比为0.25时安装系统隔振率可达70.67%.为了优化整个发动机安装系统的隔振效果,设计隔振器时必须选取合适的安装位置和参数.      

气相化学反应与声学振荡的耦合机理数值研究

通过数值仿真方法针对液体火箭发动机内的气相化学动力学与振荡声场的热声耦合机理进行了研究。采用任意拉格朗日算法解耦流动与化学源项间的刚性。采用的多步总包反应机理考虑了底层的准稳态组分脉动。通过入口流量边界的流量脉动向燃烧室中引入纵向声波,并建立了冷流声学相似场模型以分析热声耦合效应的强度。研究发现:在线性小振幅声场中,气相化学动力学控制的释热系统与声学振荡无明显耦合激励;在非线性有限幅值声场中,燃烧室压力与释热波动出现“突跃”并表现为陡峭前沿波,气相化学动力学控制的释热系统与声学振荡发生耦合激励,反应流较其冷流声学相似场的压力振荡振幅增强约300%。最后分析了耦合激励发生的可能原因,提出了气相化学动力学体系的“释热分岔”假说。     

基于蒸发式值班稳焰的涡轮基组合燃烧室燃烧性能研究

对涡轮基组合循环发动机(Turbine based combined cycle,TBCC)组合燃烧室进行了试验研究。研究首先设计了组合燃烧室模型及相关的试验系统,并在此基础上开展了不同工作模式下,进口速度系数、温度和油气比对燃烧室燃烧性能影响的试验研究。研究结果表明:随着外涵进口速度系数(λ=0.25~0.40)的增加,点火总油气比、贫油熄火总油气比均增加,燃烧效率提高;随着外涵进口温度(343~473K)的增加,点火总油气比和贫油熄火总油气比减小,燃烧效率提高;随内涵进口速度系数的增加,燃烧效率提高。试验中获得最小点火总油气比为0.0045,最小贫油熄火总油气比为0.002。