SOME RESULTS OF UPPER ATMOSPHERIC COMPOSITION MEASUREMENTS BY A MASS-SPECTROMETER ON BOARD "SZ-2":CHANGE OF COMPOSITIONS DURING SOLAR AND GEOMAGNETIC DISTURBANCES

Upper atmosphere composition data were obtained for the last half year with a quadruple mass spectrometer on board spacecraft "SZ-2" launched on 10 Jan uary 2001. Based on the analysis of these data, the variations of atmospheric compositions in solar and geomagnetic quiet conditions are reported first, then a detailed discussion on the atmospheric composition variations under the so lar and geomagnetic disturbed conditions is given. The results show that near the altitude of 400 km the variations of main atmospheric compositions corre sponding to solar disturbances are more remarkable in the sunlit area than in the shade area. On the contrary, in geomagnetic disturbance events the corre sponding variations are more obvious in the shade area, an evident increase of N2 density at relatively higher latitudes was observed.     

"神舟二号"大气密度探测器的探测结果Ⅱ.在太阳和地磁扰动期间高层大气密度的变化

选用了Sz—2大气密度探测器在2001年2—4月间的探测数据,进行日照和阴影区域热层大气密度对太阳和地磁活动程度的响应变化的探讨．结果表明,日照区大气密度峰值主要随F10.7值而变,在地磁扰动期间,阴影区大气密度对扰动的响应更明显,通常响应变化开始于高纬度地区,然后向低纬度地区推移．     

二次包封CMOS器件电子辐照实验研究

对CMOS器件54HCT00进行了复合材料的二次包封，研制了试验电路板，在器件加电工作下进行电子辐照试验的动态测试．结果表明，二次封装的器件抗总剂量的能力提高了1—2个数量级，得到了预期的数据和结果．这些工作为商用器件的空间开拓使用提供了很好的途径．     

昆虫翅膀图像特征的亚像素级提取方法

昆虫翅脉、翅脉交点及翅膀边缘是昆虫翅膀运动变形三维重构的主要依据.通过分析这三种特征的图像特点,对于翅脉中心,采用Hessian矩阵求出灰度极值点方向,并用二次曲线拟合该方向的灰度变化,通过确定该曲线极值点位置来提取亚象素翅脉中心;然后通过求灰度图像的梯度,在其梯度变化方向求极值点的方法提取翅膀边缘特征;此外根据翅脉方向变化的连续性提出了邻域角度约束方法确定翅脉交叉点,从而最终提取到亚像素级的翅膀边缘、翅脉及交叉点等特征.实际应用证明该方法是较为有效的.     

UV镜对摄影测量精度的影响及消除方法研究

针对摄影测量中加入UV镜后对测量结果的影响问题进行了研究。通过理论推导UV镜对于像点坐标偏移的影响,得出UV镜对像点偏移的影响规律,并提出采用自检校光束法平差的方法消除UV镜对像点偏移的影响,实验证明本文得出的对UV镜产生的像点偏移规律的分析及解决方法都是正确的。     

慢旋非合作目标接近轨迹规划

非合作目标自主在轨服务是在轨服务领域的研究方向,具备避碰能力的接近轨迹规划将在未来的在轨服务任务中扮演重要的角色.给出了一种基于滚动时域的慢旋非合作目标接近轨迹规划方法,利用逻辑变量和连续变量的混合形式来描述避碰约束,从而将轨迹规划问题转化为混合整数规划问题.仿真结果表明,基于滚动时域设计的慢旋非合作目标接近轨迹规划能够使得在轨服务航天器安全地接近终端状态.     

基于相似理论的月球车月面牵引性能预测

引入相似理论对月球车的轮土交互系统进行研究,建立了月壤-车轮交互系统的地面力学相似模型,针对原位月壤内聚力较小的特点,提出了一种无需改变车轮尺寸、以模拟月壤为土壤介质的模型试验方法,对月面重力环境下月球车轮的牵引性能进行预测.利用室内土槽试验和颗粒流仿真相结合的方法对该模型试验方法的有效性进行验证,验证结果与模型试验的理论分析结果较为接近,表明该法具有较好的可行性和有效性,可考虑用于预测月球车的月面牵引性能.     

纳米银膏与微米银膏烧结连接对比

用粒径20~80nm的纳米银膏和粒径1~3μm的微米银膏进行了烧结连接镀银铜块的对比实验.借助热/力物理模拟试验机Gleeble 1500D对接头剪切强度进行了测定.用扫描电镜及能谱分析仪对接头的微观组织进行了观察和分析.结果表明:在相同的连接条件下纳米银膏烧结连接的剪切强度明显高于微米银膏烧结连接的剪切强度.接头断口和显微组织分析表明,在相同条件下,纳米银膏烧结接头组织的质密性好于微米银膏烧结接头的组织质密性.在微米银连接接头中,由于Cu块-烧结银层间的界面处存在裂纹,其剪切强度较低.     

基于超声波的移动机器人多目标探测定位方法

为了使移动机器人能够对离散的多个目标进行准确的探测定位,提出了一种新的超声波智能探测方法.采用3个收发一体的超声换能器阵列发送近似的平面声波波束,并建立空间坐标系.3个探头定时发送超声波脉冲,同时数字信号处理器采集并分析接收到的回波信号,在给定的算法下滤除杂波、识别提取回波首波、二次回波和三次回波等特征信号数据,在正确检测出各路波束的回波时间后,通过计算给出多个被测物体的准确定位.实验采用了杆件物体作为被测对象,对回波信号进行高速数据采集处理后计算出被测目标的坐标值,比较了计算物位与实测物位数据,结果验证了该方法的可行性与正确性.      

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.