复合材料板壳在过屈曲下最佳铺层设计的工程方法

 本文基于相同边界条件下铺层构成对失稳后的变形形态影响不大的基本假设,根据理论和实践经验得到的准最佳铺层失稳后的位移场为基础,给出了确定最佳铺层参数的工程方法。计算表明,其基本假设和解题思路是正确的。由于本方法最后归结为解一个一元三次方程,使计算大为简化,可降低设计成本和周期,在工程设计中具有实际意义。     

飞机结构腐蚀防护和控制

按飞机腐蚀情况、防腐蚀原则、防排水和通风、合理的结构设计、制造过程和使用维护中的腐蚀控制与修复等项内容，对飞机结构腐蚀防护和控制进行了分析研究，保证飞机在寿命期内飞行安全。     

通过CNAL和DILAC实验室认可促进型号研制

通过CNAL和DILAC对实验室的认可，检测和校准实验室的综合能力将得到相应的提高。把．CNAL和DILAC对实验室的认可与加强计量管理、提高型号研制质量和保证型号研制节点紧密结合起来，充分发挥计量技术机构的优势，为型号研制和发展搭建一个良好的技术平台。     

低膨胀高温合金的发展及在航空航天业的应用

回顾了低膨胀高温合金的发展历史."因瓦效应"和"时效硬化"现象的发现奠定了低膨胀高温合金发展的基础.20世纪70年代航空航天事业的迅猛发展以及能源危机的爆发为低膨胀高温合金在航空航天业的实际应用提供了宝贵的契机, 最早的商用Fe-Ni-Co(IN9××)系列合金,经过用Nb、Ti强化,去Al,加Si等一系列成分上的变化,显著改善其应力加速晶界氧化脆性(SAGBO性能),从此低膨胀高温合金在航空航天领域得到大量应用.为改善此类合金的抗氧化和降低裂纹扩展速率等性能,又进行了新合金系的研究,即以Inconel 783合金为代表的Fe-Ni-Co-Al-Cr系合金和以Haynes 242合金为代表的Ni-Mo-Cr系合金的研究,这些合金在750℃仍能达到完全抗氧化,为新一代飞机发动机的发展提供了优质材料.     

液氮纯度分析的偏差及修正

液氮纯度是液氮产品非常关键的一个技术指标.液氮纯度的在线跟踪测量是通过测量液氮中的氧含量来实现的.在多年来的液氮在线分析及液氮出库分析过程中,发现氧含量测量结果普遍偏低.本文通过理论分析及大量的实验数据,找到了数据产生偏差的原因,并给出了科学的修正办法,为以后液氮生产过程中更加有效地控制产品质量打下了基础.     

空乘专业大学生的人格特征与职业素质分析

采用16PF和UPI量表对176名空乘专业大学生进行测评,发现有中度以上心理障碍的人数占8．40％;焦虑值偏高的人数占20．45％;适应性和成长性偏低的人数占33．50％。该群体的职业素质不能适应现代民航空服职业发展的要求。其主要问题是：缺乏认真负责的精神、意志水平不高、对社会信任不足、感情用事、自律不足、依赖性强、缺乏独立工作和应变能力。对该专业大学生加强责任意识、培养合作精神、树立人生目标的职业素质教育显得尤为重要。     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

基于FW-H方程的旋翼气动声学计算研究

由流体力学N S方程导出的非齐次波动方程———FfowcsWilliams Hawkings方程(简称FW H方程),可以精确地描述在静止流体中运动的物体与流体相互作用的发声问题。以FW H方程为理论模型,将旋翼桨叶运动发声问题等效为包含桨叶的任意运动控制面(声源面)的声辐射问题,并在旋翼绕流Euler方程数值模拟的基础上,在时域内计算了悬停旋翼和前飞旋翼的声场。应用于UH 1H和AH 1/OLS两种旋翼模型的气动声学计算表明:计算结果与噪声实验值符合良好;所研制的程序不仅能够较准确地计算单极子噪声和偶极子噪声,而且具有较强的跨音速四极子噪声预测能力。     

基于VXI总线的检测软件设计

基于VXI总线和虚拟仪器技术，研制开发了用于外场的模拟式电子控制器检测软件，并对软件开发的过程和要求进行了分析，重点解决了程序设计中的需求分析和模块化设计问题。     

具有自学习功能的机载火控系统故障诊断系统研究

研究了一种应用于机载火控系统的具有自学习功能的故障诊断系统.首先介绍了系统的总体结构;然后通过分析火控系统的结构建立了层次诊断模型,并通过示例对诊断系统中知识的表达方法、推理方法等问题做了详细的分析;最后详细描述了系统的自学习机制.应用具有自学习功能的故障诊断专家系统,可实现综合化机载火控系统的智能故障诊断.