Synthetic aperture radar capabilities for snow and glacier monitoring

The potential of SAR systems for monitoring the seasonal snow cover and glaciers has been investigated based on an airborne experiment in the Austrian Alps and on Seasat SAR and Shuttle Imaging Radar-A data. X- and C-band SAR are useful sensors for mapping wet snow packs, while in L-band snow-covered and snow-free surfaces often cannot be separated. SAR data in all three frequency bands provide valuable glaciological information.     

Low energy ions in the heavy ions in space (HIIS) experiment on LDEF.

We present data from the Lexan top stacks in the Heavy Ions In Space (HIIS) experiment which was flown for six years (April 1984-Jan 1990) onboard the LDEF spacecraft in 28.5 degrees orbit at about 476 km altitude. HIIS was built of passive (i.e. no timing resolution) plastic track detectors which collected particles continuously over the entire mission. In this paper we present data on low energy heavy ions (10 < or = Z, 20MeV/nuc < E < 200 MeV/nuc). These ions are far below the geomagnetic cutoff for fully ionized ions in the LDEF orbit even after taking into account the severe cutoff suppression caused by occasional large geomagnetic storms during the LDEF mission. Our preliminary results indicate an unusual elemental composition of trapped particles in the inner magnetosphere during the LDEF mission, including both trapped anomalous cosmic ray species (Ne, Ar) and other elements (such as Mg and Fe) which are not found in the anomalous component of cosmic rays. The origin of the non-anomalous species is not understood, but they may be associated with the solar energetic particle events and geomagnetic disturbances of 1989.     

Lunar-based enterprise infrastructure—hidden keys for long-term business success

Discussions on the creation of lunar bases or Moon-based industrial operations tend to focus on large issues i.e. transportation, cost, and/or sustainability. But assume that the fledging lunar enterprise is successful and engenders other Moon-based operations that also grow in terms of size and scope. Could success become more problematic than failure if some often minimized, yet essential, requirements for long-term human occupation of the Moon were ignored? This paper looks at lunar operations in terms of what will be required for long-term success as participants come to view themselves as terrestrial expatriates rather than engaged in short-term duty assignments.     

Photochemical initiation of gaseous detonations

Direct initiation of detonations in gaseous mixtures of C₂H₂-O₂, H₂-O₂ and H₂-Cl₂ in the pressure range of 10–150 torr using flash photolysis was studied. Similar to blast initiation using a concentrated powerful energy source, it was found that for photochemical initiation, there exists a certain threshold of flash intensity and energy for each mixture at any given initial pressure and composition below which a deflagration is formed. At the critical threshold, however, a fully developed detonation is rapidly formed in the immediate vicinity of the window of incident UV radiation. However, at super critical flash energies, the amplitude of the detonation formed decreases and combustion of the entire irradiated volume approaches a constant volume explosion. It was found that photo-chemical initiation requires both a certain minimum peak value of the free radical concentration generated by the photo-dissociation as well as an appropriate gradient of this free radical distribution. The minimum peak radical concentration permits rapid reaction rates for the generation of strong pressure waves, while the gradient is necessary for the amplification of the shock waves to a detonation. If the gradient is absent and the free radicals are uniformly distributed in the mixture, then the entire volume simply explodes as in a constant volume process. The present study reveals that the mechanism of photochemical initiation is one of proper temporal synchronization of the chemical energy release to the shock wave as it propagates through the mixture. In analogy to the LASER, the term SWACER is introduced to represent this mechanism of Shock Wave Amplication by Coherent Energy Release. There are strong indications that this SWACER mechanism is universal and plays the main role in the formation of detonations whenever a powerful concentrated external source is not used to generate a strong shock wave in the explosive.     

A new distributed constant false alarm rate detector

A new constant false alarm rate (CFAR) test termed signal-plus-order statistic CFAR (S+OS) using distributed sensors is developed. The sensor modeling assumes that the returns of the test cells of different sensors are all independent and identically distributed In the S+OS scheme, each sensor transmits its test sample and a designated order statistic of its surrounding observations to the fusion center. At the fusion center, the sum of the samples of the test cells is compared with a constant multiplied by a function of the order statistics. For a two-sensor network, the functions considered are the minimum of the order statistics (mOS) and the maximum of the order statistics (MOS). For detecting a Rayleigh fluctuating target in Gaussian noise, closed-form expressions for the false alarm and detection probabilities are obtained. The numerical results indicate that the performance of the MOS detector is very close to that of a centralized OS-CFAR and it performs considerably better than the OS-CFAR detector with the AND or the OR fusion rule. Extension to an N-sensor network is also considered, and general equations for the false alarm probabilities under homogeneous and nonhomogeneous background noise are presented.     

Ceramic ChemCam Calibration Targets on Mars Science Laboratory

The ChemCam instrument on the Mars Science Laboratory rover Curiosity will use laser-induced breakdown spectroscopy (LIBS) to analyze major and minor element chemistry from sub-millimeter spot sizes, at ranges of ～1.5–7?m. To interpret the emission spectra obtained, ten calibration standards will be carried on the rover deck. Graphite, Ti?metal, and four glasses of igneous composition provide primary, homogeneous calibration targets for the laser. Four granular ceramic targets have been added to provide compositions closer to soils and sedimentary materials like those expected at the Gale Crater field site on Mars. Components used in making these ceramics include basalt, evaporite, and phyllosilicate materials that approximate the chemical compositions of detrital and authigenic constituents of clastic and evaporite sediments, including the elevated sulfate contents present in many Mars sediments and soils. Powdered components were sintered at low temperature (800?°C) with a small amount (9?wt.%) of lithium tetraborate flux to produce ceramics that retain volatile sulfur yet are durable enough for the mission. The ceramic targets are more heterogeneous than the pure element and homogenous glass standards but they provide standards with compositions more similar to the sedimentary rocks that will be Curiosity’s prime targets at Gale Crater.     

A cost driven predictive maintenance policy for structural airframe maintenance

Airframe maintenance is traditionally performed at scheduled maintenance stops.The decision to repair a fuselage panel is based on a fixed crack size threshold,which allows to ensure the aircraft safety until the next scheduled maintenance stop.With progress in sensor technology and data processing techniques,structural health monitoring (SHM) systems are increasingly being considered in the aviation industry.SHM systems track the aircraft health state continuously,lead ing to the possibility of planning maintenance based on an actual state of aircraft rather than on a fixed schedule.This paper builds upon a model-based prognostics framework that the authors developed in their previous work,which couples the Extended Kalman filter (EKF) with a first order perturbation (FOP) method.By using the information given by this prognostics method,a novel cost driven predictive maintenance (CDPM) policy is proposed,which ensures the aircraft safety while minimizing the maintenance cost.The proposed policy is formally derived based on the trade-off between probabilities of occurrence of scheduled and unscheduled maintenance.A numerical case study simulating the maintenance process of an entire fleet of aircrafts is imple mented.Under the condition of assuring the same safety level,the CDPM is compared in terms of cost with two other maintenance policies:scheduled maintenance and threshold based SHM maintenance.The comparison results show CDPM could lead to significant cost savings.     

Testing the Stability of the Fine Structure Constant in the Laboratory

In this review we discuss the progress of the past decade in testing for a possible temporal variation of the fine structure constant α. Advances in atomic sample preparation, laser spectroscopy and optical frequency measurements led to rapid reduction of measurement uncertainties. Eventually laboratory tests became the most sensitive tool to detect a possible variation of α at the present epoch. We explain the methods and technologies that helped to make this possible.     

Application of Endfire Arrays at Contemporary Glide-Slope Problem Sites

The application of the endfire-type, compatible instrument landing system (ILS) glide slope is discussed in the context of providing increased capability to install facilities without requirements for extensive terrain modification. Costs of preparing a site for glide-slope operation can be reduced many times by eliminating the requirement for the usual image-forming ground plane. An example is given where the first endfire glide slope has been installed at an airdrome on a mesa giving a high quality path in space in spite of the limited real estate. Recent flight data from this glide slope are presented.     

The Effects of Defruiting on the ATCRBS

The defruiter that is employed in the Air Traffic Control Radar Beacon System (ATCRBS) to prefilter asynchronous replies has a complex impact on the detection, estimation and validation properties of the detection subsystem. Its positive and negative effects are quantitatively enumerated via a simulation of the beacon processing subsystem of the Automated Radar Terminal System (ARTS III). It is concluded that the disadvantages of using the present-day defruiter in the ARTS III digital processing channel outweigh the advantages when fruit rates are below several thousand per scan. As an alternative to the total elimination of the defruiter a more general class of preprocessors is defined and their input-output relationships are derived using a Markov Chain formulation. These are found to represent an improvement over the current defruiter in that the positive effects of defruiting are retained while some of the negative effects are reduced.