A Concept of Position Fixing by a Passive Mode Navigation Satellite System

A position fix in a passive mode using satellites usually necessitates an expensive computer or lengthy hand calculation. This is the largest drawback of passive navigation and it would be more desirable if the user could find his position by a mere glance at a chart and table, as one uses Loran. The first step toward this goal is to use a synchronous satellite because it simplifies the problem. The next step is to find the position of the user by a Loran type of chart, which is universal, and correct this apparent position by looking at a special table which is made according to the amount of perturbation of both the satellite and the user's position. An example of the position fix along the route between Yokohama to Hawaii is shown. The concept can be extended to orbiting satellites due to the rules which govern the motion of satellites, if the fix accuracy is in the order of 2 to 5 miles. This method should be more accurate than the common sextant and more practical due to the fact that the satellite can be used at any time and in any weather. As a total system, it will be better than Omega because it could provide additional navigation information such as communication or traffic control by using satellites.     

The Solar Chemical Composition

We present our current knowledge of the solar chemical composition based on the recent significant downward revision of the solar photospheric abundances of the most abundant metals. These new solar abundances result from the use of a 3D hydrodynamic model of the solar atmosphere instead of the classical 1D hydrostatic models, accounting for departures from LTE, and improved atomic and molecular data. With these abundances, the new solar metallicity, Z, decreases to Z=0.012, almost a factor of two lower than earlier widely used values. We compare our values with data from other sources and analyse a number of impacts of these new photospheric abundances. While resolving a number of longstanding problems, the new 3D-based solar photospheric composition also poses serious challenges for the standard solar model as judged by helioseismology.     

Dissipation of magnetic fields in active galactic nuclei

A model for the emission processes causing rapid variability (less than one day) in active galactic nuclei is developed. Relativistic electron beams escape from reconnection sheets in coronae of accretion disks and excite plasma turbulence with a typical frequency , which depends on the electron number densityn (see also the contribution by R. van Oss). The finite lengths of different beams emerging from different reconnection sheets allows that the waves arecoherently scattered to frequencies ²_pe. For Lorentz factors 10³ and densities typical for disk coronaen10⁶ cm ^–3 (derived from iron line observations) one easily reaches the optical, frequency range. The time scale of the variability is then caused by the relaxation of the electron beams. Likewise, this model explains the very rapid variability in the X-ray (less than 10 minutes) by changing the parameters slightly. According to this scenario the higher the variable frequency is, the closer to the central black hole it should originate.     

EUV spectroscopy as a plasma diagnostic

The EUV wavelength regions is rich in emission lines from the transition region and the corona. Spectroscopic techniques have been used extensively to determine the physical conditions in the solar atmosphere for such diverse phenomena as coronal holes, active regions, sunspots, flares, etc. The diagnostics and dynamics of plasmas, both homogeneous and inhomogeneous plasmas, are reviewed. The future projects such as the CDS and SUMER instruments on SOHO have been discussed as they cover EUV wavelength region and will provide a wealth of observational data with excellent spatial, spectral, and temporal resolution.     

A localizer design to improve missed approach guidance

A novel VHF localizer system has been designed, built and successfully tested to provide increased reliability and safety of commercial and general aviation air transportation. Additional benefits are more precise tracks for aircraft executing a missed approach, reduced volume of the airspace needed for missed approaches, and reduced sizes of areas affected by noise. The design uses contemporary instrument landing system (ILS) hardware to provide dual independent front and back course directional localizer operation with two carriers in the receiver passband offset 4 kHz from the nominal carrier frequency. An example is given of an application and solution to an ILS problem at Reno, NV. Relevant data are presented     

Blind adaptive decision fusion for distributed detection

We consider the problem of decision fusion in a distributed detection system. In this system, each detector makes a binary decision based on its own observation, and then communicates its binary decision to a fusion center. The objective of the fusion center is to optimally fuse the local decisions in order to minimize the final error probability. To implement such an optimal fusion center, the performance parameters of each detector (i.e., its probabilities of false alarm and missed detection) as well as the a priori probabilities of the hypotheses must be known. However, in practical applications these statistics may be unknown or may vary with time. We develop a recursive algorithm that approximates these unknown values on-line. We then use these approximations to adapt the fusion center. Our algorithm is based on an explicit analytic relation between the unknown probabilities and the joint probabilities of the local decisions. Under the assumption that the local observations are conditionally independent, the estimates given by our algorithm are shown to be asymptotically unbiased and converge to their true values at the rate of O(1/k/sup 1/2/) in the rms error sense, where k is the number of iterations. Simulation results indicate that our algorithm is substantially more reliable than two existing (asymptotically biased) algorithms, and performs at least as well as those algorithms when they work.     

A new distributed constant false alarm rate detector

A new constant false alarm rate (CFAR) test termed signal-plus-order statistic CFAR (S+OS) using distributed sensors is developed. The sensor modeling assumes that the returns of the test cells of different sensors are all independent and identically distributed In the S+OS scheme, each sensor transmits its test sample and a designated order statistic of its surrounding observations to the fusion center. At the fusion center, the sum of the samples of the test cells is compared with a constant multiplied by a function of the order statistics. For a two-sensor network, the functions considered are the minimum of the order statistics (mOS) and the maximum of the order statistics (MOS). For detecting a Rayleigh fluctuating target in Gaussian noise, closed-form expressions for the false alarm and detection probabilities are obtained. The numerical results indicate that the performance of the MOS detector is very close to that of a centralized OS-CFAR and it performs considerably better than the OS-CFAR detector with the AND or the OR fusion rule. Extension to an N-sensor network is also considered, and general equations for the false alarm probabilities under homogeneous and nonhomogeneous background noise are presented.     

A three-dimensional plasma and energetic particle investigation for the wind spacecraft

This instrument is designed to make measurements of the full three-dimensional distribution of suprathermal electrons and ions from solar wind plasma to low energy cosmic rays, with high sensitivity, wide dynamic range, good energy and angular resolution, and high time resolution. The primary scientific goals are to explore the suprathermal particle population between the solar wind and low energy cosmic rays, to study particle accleration and transport and wave-particle interactions, and to monitor particle input to and output from the Earth's magnetosphere.Three arrays, each consisting of a pair of double-ended semi-conductor telescopes each with two or three closely sandwiched passivated ion implanted silicon detectors, measure electrons and ions above 20 keV. One side of each telescope is covered with a thin foil which absorbs ions below 400 keV, while on the other side the incoming <400 keV electrons are swept away by a magnet so electrons and ions are cleanly separated. Higher energy electrons (up to 1 MeV) and ions (up to 11 MeV) are identified by the two double-ended telescopes which have a third detector. The telescopes provide energy resolution of E/E0.3 and angular resolution of 22.5°×36°, and full 4 steradian coverage in one spin (3 s).Top-hat symmetrical spherical section electrostatic analyzers with microchannel plate detectors are used to measure ions and electrons from 3 eV to 30 keV. All these analyzers have either 180° or 360° fields of view in a plane, E/E0.2, and angular resolution varying from 5.6° (near the ecliptic) to 22.5°. Full 4 steradian coverage can be obtained in one-half or one spin. A large and a small geometric factor analyzer measure ions over the wide flux range from quiet-time suprathermal levels to intense solar wind fluxes. Similarly two analyzers are used to cover the wide range of electron fluxes. Moments of the electron and ion distributions are computed on board.In addition, a Fast Particle Correlator combines electron data from the high sensitivity electron analyzer with plasma wave data from the WAVE experiment (Bougeretet al., in this volume) to study wave-particle interactions on fast time scales. The large geometric factor electron analyzer has electrostatic deflectors to steer the field of view and follow the magnetic field to enhance the correlation measurements.