Microorganisms and biomolecules in space environment experiment ES 029 on Spacelab-1.

Bacterial spores are proper test organisms for studying problems of space biology and exobiology. During the Spacelab 1 mission, studies on the limiting factors for survival of Bacillus subtilis spores in free space have been performed. An exposure tray on the pallet of Spacelab 1 accomodated 316 samples of dry spores for treatment with space vacuum and/or the following selected wavelengths of solar UV: > 170 nm, 220 nm, 240nm, 260nm and 280 nm. After recovery, inactivation, mutation induction, reparability, and photochemical damages in DNA and protein have been studied. The results contribute to the understanding of the mechanisms of increased UV sensitivity of bacterial spores in vacuo and to a better assessment of the chance of survival of resistant forms in space and of interplanetary transfer of life.     

The organic aerosols of Titan

A dark reddish organic solid, called tholin, is synthesized from simulated Titanian atmospheres by irradiation with high energy electrons in a plasma discharge. The visible reflection spectrum of this tholin is found to be similar to that of high altitude aerosols responsible for the albedo and reddish color of Titan. The real (n) and imaginary (k) parts of the complex refractive index of thin films of Titan tholin prepared by continuous D.C. discharge through a 0.9 N₂/0.1 CH₄ gas mixture at 0.2 mb is determined from x-ray to microwave frequencies. Values of n (1.65) and k (0.004 to 0.08) in the visible are consistent with deductions made by ground-based and spaceborne observations of Titan. Many infrared absorption features are present in k(λ), including the 4.6 μm nitrile band. Molecular analysis of the volatile component of this tholin was performed by sequential and non-sequential pyrolytic gas chromatography/mass spectrometry. More than one hundred organic compounds are released; tentative identifications include saturated and unsaturated aliphatic hydrocarbons, substituted polycyclic aromatics, nitriles, amines, pyrroles, pyrazines, pyridines, pyrimidines, and the purine, adenine. In addition, acid hydrolysis produces a racemic mixture of biological and non-biological amino acids. Many of these molecules are implicated in the origin of life on Earth, suggesting Titan as a contemporary laboratory environment for prebiological organic chemistry on a planetary scale.     

Orbital and Attitude Prediction Accuracy Requirements for Satellites

This paper examines the criteria for selecting the orbital and attitude prediction accuracy requirements for communications satellites. The accuracy requirements have been analyzed in terms of the various space operations involved, e.g., satellite acquisition, guidance and control, communications, telemetry, and command. It is hoped that the findings of this investigation will prove useful in satellite mission planning and design, thereby facilitating a judicious choice of the various satellite and ground components of the related subsystems.     

Interplanetary acceleration of low-energy protons as observed during the 25 september 1978 shock event

ISEE-3 observations of a long-lasting low-energy proton intensity increase during the 25 September 1978 shock event are presented as an example for interplanetary particle acceleration in association with shock waves. The observations are discussed in the light of current models for particle acceleration. The particular shape of the time intensity behaviour of the particle intensity increase, the existence of a shock spike and the observed particle distributions indicate that the particles are accelerated at the shock by the induced electric field $\text{E}\text{= ?}\text{1}\text{c}\text{V}\text{×}\text{B}$.     

Localization performance of arrays subject to phase errors

The passive localisation of radiating sources using an array subject to random perturbations in sensor phases is presented. All source signals as well as additive noises observed at the sensors are assumed to be independent identically distributed zero-mean Gaussian random processes. Cramer-Rao bounds are derived for source bearings and ranges for the phase errors at each sensor. It is shown that accurate phase calibration can be achieved when the number of sources exceeds a certain minimum. The locations of the calibrating sources need not be known a priori and need only satisfy mild regularity conditions. A calibration procedure is proposed which uses maximum-likelihood techniques     

CCRS C/X-airborne synthetic aperture radar: An Rand D tool for the ERS-1 time frame

The airborne synthetic-aperture radar (SAR) system developed for the Canada Centre for Remote Sensing (CCRS) is described. It consists of two radars, at C-band and X-band. Each radar incorporates the following features: dual-channel receivers and dual-polarized antennas; a high quality, 7-look, real-time processor; a sensitivity time control for range-dependent gain control; a motion-compensation system for antenna steering in azimuth and elevation; and baseband I and Q signal phase rotation. The system also uses a high-power transmitter with a low-power back-up. The SAR maps to either side of the aircraft, at high or low resolution, at incidence angles which in high resolution span 0° to 80°. Radar operating parameters, data products, key specifications and the motion compensation scheme used are presented. Properties of the real-time imagery are discussed and examples of C-band SAR data in the three operating modes are given     

Computational fluid dynamics and material processing (buoyancy and thermocapillary convections in melts during directional crystallization)

Modelisation and solution of heat and mass transfer problems relevant for material processing are generally hard to be handled, as they often involve 3D unsteady flows, viscous mixtures, phase changes, moving liquid-solid fronts, deforming liquid-gas interfaces, etc.… For space applications, material processing benefits of reduced buoyancy convection but can be faced to a strongly increased complexity due to variable g, mainly in manned flight.

Computational techniques used to analyse fluid motions in material processing, accounting for free surface, crystallization front and bulk convection in melt, are reviewed with emphasis to directional crystallization. Hydrodynamics stability and bifurcation analysis are shown to be useful complementary tools for correlating data, and for a better understanding of the physical laws. This last point will be illustrated in the case of the onset of oscillations in metallic melts.     

A review of long drop tubes as a supplement/alternative to space experiments

The 100 meter high drop tube at the Marshall Space Flight Center has proven to be a viable facility for studies of containerless solidification. Advantages are that experiments are inexpensive and large numbers of specimens can be processed rapidly. It would not be unusual to run ten specimens in a day. Another significant advantage is that the undercooling behavior can be followed with sufficient sensitivity to easily detect the onset of recalescence and subsequent events.Disadvantages are the restrictions on specimen sizes and types of alloys that can be run in a microgravity environment. Practical specimen sizes range between 50 mg and 500 mg depending on the type of furnace being used. Refractory alloys can be processed in a vacuum (about 10^?5 torr) and therefore at microgravity. Non-refractory alloys demand an atmosphere (about 200 torr) to obtain appreciable undercooling before impact at the bottom of the tube. Under these conditions significant g forces result.Because of the present limitations of the 100 meter drop tube, the most definitive work has been done on niobium based alloys. Large amounts of undercooling have been observed routinely and the effects of undercooling on microstructure have been characterized in detail. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy have been used to determine types of phases, amounts of phases, and compositions of phases. It is clear, as would be expected, that the results bear some resemblance to rapid solidification processing by quenching. However, there are dissimilarities due to the uniqueness of solidification by deep undercooling without quenching in long drop tubes and accompanying recalescence effects.