Rejection of Multipath Interference in Satellite Communications by Use of Narrow-Band Filters

Earth-reflected multipath interference can be serious for communication between near-earth spacecraft and stationary satellites. It is shown that both the depth and rate of fading are reduced by using narrow-band filters. Curves demonstrate the saving in fading margin; this saving may be crucial in an emergency.     

ARTEMIS Mission Design

The ARTEMIS mission takes two of the five THEMIS spacecraft beyond their prime mission objectives and reuses them to study the Moon and the lunar space environment. Although the spacecraft and fuel resources were tailored to space observations from Earth orbit, sufficient fuel margins, spacecraft capability, and operational flexibility were present that with a circuitous, ballistic, constrained-thrust trajectory, new scientific information could be gleaned from the instruments near the Moon and in lunar orbit. We discuss the challenges of ARTEMIS trajectory design and describe its current implementation to address both heliophysics and planetary science objectives. In particular, we explain the challenges imposed by the constraints of the orbiting hardware and describe the trajectory solutions found in prolonged ballistic flight paths that include multiple lunar approaches, lunar flybys, low-energy trajectory segments, lunar Lissajous orbits, and low-lunar-periapse orbits. We conclude with a discussion of the risks that we took to enable the development and implementation of ARTEMIS.     

An Automatic Data Processing System for Laser Anemometers

An automatic data processing system for the evaluation of statistically occurring Doppler-difference bursts is described. In addition to the higher accuracy compared with the data acquisition procedures known so far, this technique allows the Doppler-difference method to be used as an operational instrument for investigations into turbulent flows, especially in the case of low particle density and extremely small turbulence degrees.     

Survey of High-Power Microwave Filters

A summary of research and development work on high-power microwave filters is given here: first, design considerations in high-power microwave filters?power handling capacity, waveform distortion, multimode suppression, and stop and pass band characteristics; second, a discussion of filtering devices and techniques in two broad categories-dominant mode filters and harmonic filters (discussion covers methods of operation and significant characteristics of each filter developed to date); and third, a discussion of applications and limitations of filters in various systems and interference situations. Also included are the availability, cost, size, weight, etc. as functions of frequency for the various filter types.     

Remarks on light-sailing in space

This note summarizes some fundamentals on light-sailing systems. Light-sailing was the subject of a letter published in A & A Journal of January 1983, p. 6. Hence, it might be of interest to summarize some fundamentals of such systems.     

Efficient implementation of Capon and APES for spectral estimation

Both the Capon and APES estimators can be shown to belong to the class of matched-filterbank spectral estimators and can be used to obtain complex spectral estimates that have more narrow spectral peaks and lower sidelobe levels than the fast Fourier transform (FFT) methods. It can also be shown that APES has better statistical performance than Capon. In this paper, we address the issue of how to efficiently implement Capon and APES for spectral estimation     

Phase separated membrane bioreactor: results from model system studies.

The operation and evaluation of a bioreactor designed for high intensity oxygen transfer in a microgravity environment is described. The reactor itself consists of a zero headspace liquid phase separated from the air supply by a long length of silicone rubber tubing through which the oxygen diffuses in and the carbon dioxide diffuses out. Mass transfer studies show that the oxygen is film diffusion controlled both externally and internally to the tubing and not by diffusion across the tube walls. Methods of upgrading the design to eliminate these resistances are proposed. Cell growth was obtained in the fermenter using Saccharomyces cerevisiae showing that this concept is capable of sustaining cell growth in the terrestrial [correction of terrestial] simulation.     

Hypothesis-test-based landcover change detection using multi-temporal satellite images – A comparative study

Remote sensing images and technologies have been widely applied to environmental monitoring, in particular landuse/landcover classification and change detection. However, the uncertainties involved in such applications have not been fully addressed. In this paper two hypothesis-test-based change detection methods, namely the bivariate joint distribution method and the conditional distribution method, are proposed to tackle the uncertainties in change detection by making decisions based on the desired level of significance. Both methods require a data set of class-dependent no-change pixels to form the basis for class-dependent hypothesis test. Using an exemplar study area in central Taiwan, performance of the proposed methods are shown to be significantly superior to two other commonly applied methods (the post-classification comparison and the image differencing methods) in terms of the overall change detection accuracies. The conditional distribution method takes into consideration the correlation between digital numbers of the pre- and post-images and the effect of the known pre-image digital number on the range of the post-image digital number, and therefore yields the highest change detection accuracy. It is also demonstrated that the class-dependent change detection is crucial for accurate landuse/landcover change detection.     

Global simulations using MHD codes: A few points to consider before you try one

A survey of all global time-dependent MHD simulations is presented. The survey includes a discussion of the physical situations simulated by the respective authors as well as the numerical algorithms employed. Finally a discussion of the advantages enjoyed by certain numerical schemes and the problems that a researcher will very likely encounter if he should undertake construction of such codes is presented.     

Dynamics of a spacecraft and normalization around Lagrangian points in the Neptune–Triton system

The problem of a spacecraft orbiting the Neptune–Triton system is presented. The new ingredients in this restricted three body problem are the Neptune oblateness and the high inclined and retrograde motion of Triton. First we present some interesting simulations showing the role played by the oblateness on a Neptune’s satellite, disturbed by Triton. We also give an extensive numerical exploration in the case when the spacecraft orbits Triton, considering Sun, Neptune and its planetary oblateness as disturbers. In the plane a × I (a = semi-major axis, I = inclination), we give a plot of the stable regions where the massless body can survive for thousand of years. Retrograde and direct orbits were considered and as usual, the region of stability is much more significant for the case of direct orbit of the spacecraft (Triton’s orbit is retrograde). Next we explore the dynamics in a vicinity of the Lagrangian points. The Birkhoff normalization is constructed around L₂, followed by its reduction to the center manifold. In this reduced dynamics, a convenient Poincaré section shows the interplay of the Lyapunov and halo periodic orbits, Lissajous and quasi-halo tori as well as the stable and unstable manifolds of the planar Lyapunov orbit. To show the effect of the oblateness, the planar Lyapunov family emanating from the Lagrangian points and three-dimensional halo orbits are obtained by the numerical continuation method.