Fluorescence microscopy as a tool for in situ life detection

The identification of extant and, in some cases, extinct bacterial life is most convincingly and efficiently performed with modern high-resolution microscopy. Epifluorescence microscopy of microbial autofluorescence or in conjunction with fluorescent dyes is among the most useful of these techniques. We explored fluorescent labeling and imaging of bacteria in rock and soil in the context of in situ life detection for planetary exploration. The goals were two-fold: to target non-Earth-centric biosignatures with the greatest possible sensitivity and to develop labeling procedures amenable to robotic implementation with technologies that are currently space qualified. A wide panel of commercially available dyes that target specific biosignature molecules was screened, and those with desirable properties (i.e., minimal binding to minerals, strong autofluorescence contrast, no need for wash steps) were identified. We also explored the potential of semiconductor quantum dots (QDs) as bacterial and space probes. A specific instrument for space implementation is suggested and discussed.     

Amino acids from ion-irradiated nitrile-containing ices

Solid CH(3)CN and solid H(2)O + CH(3)CN were ion irradiated near 10 K to initiate chemical reactions thought to occur in extraterrestrial ices. The infrared spectra of these samples after irradiation revealed the synthesis of new molecules. After the irradiated ices were warmed to remove volatiles, the resulting residual material was extracted and analyzed. Both unhydrolyzed and acid-hydrolyzed residues were examined by both liquid and gas chromatographic-mass spectral methods and found to contain a rich mixture of products. The unhydrolyzed samples showed HCN, NH(3), acetaldehyde (formed by reaction with background and atmospheric H(2)O), alkyamines, and numerous other compounds, but no amino acids. However, reaction products in hydrolyzed residues contained a suite of amino acids that included some found in carbonaceous chondrite meteorites. Equal amounts of D- and L-enantiomers were found for each chiral amino acid detected. Extensive use was made of (13)C-labeled CH(3)CN to confirm amino acid identifications and discriminate against possible terrestrial contaminants. The results reported here show that ices exposed to cosmic rays can yield products that, after hydrolysis, form a set of primary amino acids equal in richness to those made by other methods, such as photochemistry.     

Entrapment of bacteria in fluid inclusions in laboratory-grown halite

Cells of the bacterium Pseudomonas aeruginosa, which were genetically modified to produce green fluorescent protein, were entrapped in fluid inclusions in laboratory-grown halite. The bacteria were used to inoculate NaCl-saturated aqueous solutions, which were allowed to evaporate and precipitate halite. The number, size, and distribution of fluid inclusions were highly variable, but did not appear to be affected by the presence of the bacteria. Many of the inclusions in crystals from inoculated solutions contained cells in populations ranging from two to 20. Microbial attachment to crystal surfaces was neither evident nor necessary for entrapment. Cells occurred exclusively within fluid inclusions and were not present in the crystal matrix. In both the inclusions and the hypersaline solution, the cells fluoresced and twitched, which indicates that the bacteria might have remained viable after entrapment. The fluorescence continued up to 13 months after entrapment, which indicates that little degradation of the bacteria occurred over that time interval. The entrapment, fluorescence, and preservation of cells were independent of the volume of hypersaline solution used or whether the solutions were completely evaporated prior to crystal extraction. The results of this study have a wide range of implications for the long-term survival of microorganisms in fluid inclusions and their detection through petrography. The results also demonstrate the preservation potential for microbes in hypersaline fluid inclusions, which could allow cells to survive harsh conditions of space, the deep geologic past, or burial in sedimentary basins.     

Development of a plant growth unit for growing plants over a long-term life cycle under microgravity conditions.

To study the effect of the space environment on plant growth including the reproductive growth and genetic aberration for a long-term plant life cycle, we have initiated development of a new type of facility for growing plants under microgravity conditions. The facility is constructed with subsystems for controlling environmental elements. In this paper, the concept of the facility design is outlined. Subsystems controlling air temperature, humidity, CO2 concentration, light and air circulation around plants and delivering recycled water and nutrients to roots are the major concerns. Plant experiments for developing the facility and future plant experiments with the completed facility are also overviewed. We intend to install this facility in the Japan Experiment Facility (JEM) boarded on the International Space Station.     

Radio plasma imager simulations and measurements

The Radio Plasma Imager (RPI) will be the first-of-its kind instrument designed to use radio wave sounding techniques to perform repetitive remote sensing measurements of electron number density (N _e) structures and the dynamics of the magnetosphere and plasmasphere. RPI will fly on the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) mission to be launched early in the year 2000. The design of the RPI is based on recent advances in radio transmitter and receiver design and modern digital processing techniques perfected for ground-based ionospheric sounding over the last two decades. Free-space electromagnetic waves transmitted by the RPI located in the low-density magnetospheric cavity will be reflected at distant plasma cutoffs. The location and characteristics of the plasma at those remote reflection points can then be derived from measurements of the echo amplitude, phase, delay time, frequency, polarization, Doppler shift, and echo direction. The 500 m tip-to-tip X and Y (spin plane) antennas and 20 m Z axis antenna on RPI will be used to measures echoes coming from distances of several R _E. RPI will operate at frequencies between 3 kHz to 3 MHz and will provide quantitative N _e values from 10^–1 to 10⁵ cm^–3. Ray tracing calculations, combined with specific radio imager instrument characteristics, enables simulations of RPI measurements. These simulations have been performed throughout an IMAGE orbit and under different model magnetospheric conditions. They dramatically show that radio sounding can be used quite successfully to measure a wealth of magnetospheric phenomena such as magnetopause boundary motions and plasmapause dynamics. The radio imaging technique will provide a truly exciting opportunity to study global magnetospheric dynamics in a way that was never before possible.     

The Radio Plasma Imager investigation on the IMAGE spacecraft

Radio plasma imaging uses total reflection of electromagnetic waves from plasmas whose plasma frequencies equal the radio sounding frequency and whose electron density gradients are parallel to the wave normals. The Radio Plasma Imager (RPI) has two orthogonal 500-m long dipole antennas in the spin plane for near omni-directional transmission. The third antenna is a 20-m dipole along the spin axis. Echoes from the magnetopause, plasmasphere and cusp will be received with the three orthogonal antennas, allowing the determination of their angle-of-arrival. Thus it will be possible to create image fragments of the reflecting density structures. The instrument can execute a large variety of programmable measuring options at frequencies between 3 kHz and 3 MHz. Tuning of the transmit antennas provides optimum power transfer from the 10 W transmitter to the antennas. The instrument can operate in three active sounding modes: (1) remote sounding to probe magnetospheric boundaries, (2) local (relaxation) sounding to probe the local plasma frequency and scalar magnetic field, and (3) whistler stimulation sounding. In addition, there is a passive mode to record natural emissions, and to determine the local electron density, the scalar magnetic field, and temperature by using a thermal noise spectroscopy technique.     

The Galaxy Cluster Mass Scale and Its Impact on Cosmological Constraints from the Cluster Population

Space Science Reviews - The QB50 mission is a satellite constellation designed to carry out measurements at between 200–380 km altitude in the ionosphere. The multi-needle Langmuir probe...     

Post-midnight equatorial irregularity distributions and vertical drift velocity variations during solstices

Longitudinal distributions of post-midnight equatorial ionospheric irregularity occurrences observed by ROCSAT-1 (1st satellite of the Republic of China) during moderate to high solar activity years in two solstices are studied with respect to the vertical drift velocity and density variations. The post-midnight irregularity distributions are found to be similar to the well-documented pre-midnight ones, but are different from some published distributions taken during solar minimum years. Even though the post-midnight ionosphere is sinking in general, longitudes of frequent positive vertical drift and high density seems to coincide with the longitudes of high irregularity occurrences. Large scatters found in the vertical drift velocity and density around the dip equator in different ROCSAT-1 orbits indicate the existence of large and frequent variations in the vertical drift velocity and density that seem to be able to provide sufficient perturbations for the Rayleigh-Taylor (RT) instability to cause the irregularity occurrences. The need of seeding agents such as gravity waves from atmospheric convective clouds to initiate the Rayleigh-Taylor instability may not be necessary.     

Assessment of thin cirrus and low cloud over snow by means of the maximum likelihood method

Cirrus clouds and low clouds over snow are sometimes difficult to assess by common retrieval methods. In the case of cirrus the reason is the highly variable optical depth while low clouds have approximately the same temperature and reflection properties as snow covered mountains (or plains). An empirical interactive method is described, which allows to classify with great detail clouds of the described types and to determine the fractional coverage of each cloud type as seen from the satellite. The statistical properties of the cloud classes are determined by analyzing small areas of uniform cloudiness. The algorithms applied to pairs of spectral images is the standard maximum likelihood method.