基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

航迹跟踪的优化方法研究

最优航迹跟踪要求飞机的实际飞行航迹与理想航迹的偏差最小,但若采用按偏差的最优控制方法,会造成控制变量的剧烈震荡.为了解决控制变量的剧烈震荡问题,提出了一种新的偏差-微分综合控制方法.通过对参考航迹的跟踪验证,表明该方法有效地解决了控制变量最优解的振荡问题,并实现了精确的航迹跟踪性能.     

数值模拟高超音速化学非平衡流的隐式格式

针对高超音速化学非平衡流提出了两种隐式格式.一种是近似因子分解算法对角化形式在隐式TVD(全变差递减)格式上的推广,另一种可视为隐式TVD格式的LU分解形式.数值试验表明,本文给出的算法保持了TVD格式的高分辨率特性,同时计算量大大减少,是高超音速化学非平衡流数值模拟的有效方法.     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。     

歼击机特殊部件设计载荷谱编制技术

介绍了用飞行模拟仿真法编制新机设计载荷谱的技术途径和特点.重点阐述了整体油箱压力/应力谱和垂尾阵风侧滑机动谱等歼击机特殊部件设计载荷谱编制技术.整体油箱载荷谱编制的关键在于各种载荷状态的压力计算,还应考虑地-空-地循环.垂尾谱不能完全由飞行模拟获得,而必须以空测统计数据为基础.     

星光对机动弹道导弹主动段的修正

 <正> 以惯性技术为主,并以星光、无线电等其它技术为辅的组合导航及制导技术是70年代以来发展较为迅速,并被认为是行之有效的技术手段。特别是对于大型航空航天飞行器。例如航天飞机、远程导弹等,只有采用精密的组合导航技术才能保证这类飞行任务的完成。任何单一的导航及制导技术都有其长处及弱点,将这些单一的技术手段组合起来扬长避短、相互补偿,毫无疑问是一种可行的途径。星光的引进将会使对     

基于冗余伪观测的自适应滤波算法

现有的二阶互差分(SOMD)算法能够给出与状态估计误差解耦的观测噪声协方差估计，但是需要满足冗余测量的条件，但这一条件往往难以满足。 针对这一问题，提出了一种利用状态预测值构造相邻2个时刻伪观测的方法，将原SOMD算法扩展到具有单测量的系统中。使用目标跟踪问题对该算法的有效性进行验证。仿真结果表明，当采样周期较小时，该算法能够忽略状态估计误差的影响并给出较准确的观测噪声方差，在精度和鲁棒性方面优于其他参考算法。     

GH169合金细晶锻造工艺研究

为了提高涡轮盘的强度和低周疲劳性能,要求锻件具有ASTM10级以上的细晶组织国外在大型压力机上采用低温大变形锻造和直接时效热处理以获得性能良好的细晶锻件,而我国则试图采用锻锤生产GH169合金涡轮盘锻件,因此,需要探索适合国情的GH169合金细晶锻造工艺。根据以往的研究,δ相对GH169合金的显微组织有明显影响,因而可