Command filtered sliding mode trajectory tracking control for unmanned airships based on RBFNN approximation

This paper presents two sliding mode controllers to address the trajectory tracking problem of unmanned airships in the presence of unknown wind disturbance. The sliding mode controller proposed first is designed by a fast power rate reaching law(FPRRL). The disturbance is compensated by a radial basis function neural network (RBFNN). To avoid the aggressive adaptation, the controller is augmented by a command filter. The controller provides good robustness and tracking performance with no chattering under the hypothesis of ideal wind field. However, serious chattering occurs when simulation is performed under discontinuous wind field. To simulate the wind in practice, the wind field employed in the simulation is generated by the combination of a constant field and white noise. The controller is improved subsequently with an extended model to suppress the chattering induced by the white noise. The enhanced controller manipulates the derivation of system input, thus attenuating the chattering. Stability analysis shows that both controllers drive the tracking error into a controllable small region near zero. Simulations are provided to validate the performance of the proposed controllers under different wind hypothesis.     

EW射频隐身系统频率选择表面电磁散射参数的测量

频率选择表面(FSS)技术为电子战射频隐身提供了新的实现技术途径,散射参数的测量验证是射频隐身系统FSS设计的关键环节.针对非理想测量环境,以一种小型化带阻频率选择表面为例,提出了一套频率选择表面散射参数的测量和校准方法,有效消除了测量中信号的衰减、测量天线间的耦合以及信号多径传播等对真实结果造成的影响,使之尽可能接近在理想环境中的测试结果.该方法极大改善了周期性人工电磁结构散射参数测量对环境的依赖,降低了射频隐身FSS设计的研发成本,在电子战领域具有良好的应用前景.     

Postcapture stabilization of space robots considering actuator failures with bounded torques

Space robotics is regarded as one of the most impressing approaches for space debris removal missions. Due to the residual momentum of debris, it is essential to stabilize the base rapidly after capture. This paper presents a novel control strategy for stabilization of a space robot in postcapture considering actuator failures and bounded torques. In the control strategy, the motion of the manipulator is not regarded as a disturbance to the base; in contrast, it is utilized to compensate for the limitation of the control torques by means of an inverse dynamical model of the system. Different scenarios where actuators are external mechanisms or momentum exchange devices have been carried out, and for actuator failures, both single- and two-actuator failures have been considered. Regarding to the performance of actuators, control torques are bounded. In cases that either single or two actuators have failed, the base can be stabilized kinematically when actuators are external mechanisms, but can only be stabilized dynamically when only momentum exchange devices are used. Finally, a space robot with a seven-degree-of-freedom manipulator in postcapture is studied to verify the validity and feasibility of the proposed control scheme. Simulation results show that the whole system can be stabilized rapidly.     

基于RISC芯片的32位嵌入式基本系统的设计和调试

基于ＲＩＳＣ芯片的３２位嵌入式基本系统的研究和设计是当前嵌入式星载计算机研制方面的一个重要课题，着重介绍了该ＲＩＳＣ基本系统的设计特点以及所使用的构思新颖的调试方法等两方面的研究情况。     

A novel signal processing approach for LEO space debris based on a fence-type space surveillance radar system

The increase in space debris can seriously threaten regular activities in the Low Earth Orbit (LEO) environment. Therefore, it is necessary to develop robust, efficient and reliable techniques to understand the potential motions of the LEO debris. In this paper, we propose a novel signal processing approach to detect and estimate the motions of LEO space debris that is based on a fence-type space surveillance radar system. Because of the sparse distribution of the orbiting debris through the fence in our observations, we formulate the signal detection and the motion parameter estimation as a sparse signal reconstruction problem with respect to an over-complete dictionary. Moreover, we propose a new scheme to reduce the size of the original over-complete dictionary without the loss of the important information. This new scheme is based on a careful analysis of the relations between the acceleration and the directions of arrival for the corresponding LEO space debris. Our simulation results show that the proposed approach can achieve extremely good performance in terms of the accuracy for detection and estimation. Furthermore, our simulation results demonstrate the robustness of the approach in scenarios with a low Signal-to-Noise Ratio (SNR) and the super-resolution properties. We hope our signal processing approach can stimulate further work on monitoring LEO space debris.     

特型钝体绕流动态特性的低速实验研究

在低速自由射流风洞上 ,利用热线及相关设备对由半球头部、颈部及旋成体构成的特型钝体周围非定常流动的基本特性、联合特性及湍流度分布进行了测试与分析 ,实验工况为迎角α=- 1 5°～ 1 5°、侧滑角 β =0°～ 1 0°。结果表明 ,在上述工况范围内 ,该钝体周围流场中速度脉动的能量分布平坦 ,属宽频带随机信号 ,流场中没有发生明显的流动分离 ,流场动态品质良好 ;凹陷区内气流的脉动以不同的速度向下游空间传播 ;在上述α、β变化范围内 ,钝体颈部凹陷区的最大湍流度高达 1 0 .9～ 2 4.8%。     

Periodic ambiguity functions of EQC-based TFHC

The time-frequency hop codes based upon extended quadratic congruences (TFHC-EQC) were developed previously (1988, 1991). The known results about the ambiguity functions of the TFHC-EQC are extended from aperiodic cases to periodic cases. Precisely, the following new results are proved: (1) The tight upper bound for the periodic auto-ambiguity function of the TFHC-EQC is 6; (2) the periodic cross-ambiguity upper bound of the TFHC-EQC is at least (N-1)/2; (3) there exists a subset TFHC-EQC of volume (N-1)/2 such that its periodic cross-ambiguity is tightly upper bounded by 8     

速率转台的角速率不确定度评定方法

利用不确定度的理论来评定速率转台的角速率不确定度。     

AHP中判断矩阵元素最优估计值的误差分析

在AHP模型中，请一组专家对某一属性进行评价，通过适当的数学处理方法，可得判断矩阵元素的最优估计值，并根据残差来确定所求估计值是否达到精度要求，若不符合精度要求则需返还给专家进行重新评估。这是AHP中构造判断矩阵的一种新方法。     

舰载战斗机拦阻钩系统总体参数分析

从舰载飞机拦阻钩系统着舰布局图中进场着舰的物理图像出发,根据飞行力学的基本原理,对等角下滑技术的关键参数,包括飞机质量、推荐的下滑道设置、下滑航迹角、基准迎角、进场着舰速度和航空母舰运动速度、回收逆风、钩眼距（H/E）等参数对进舰着舰的影响及其相互关系进行了分析。