重型运载火箭关键制造技术发展展望

我国未来重型运载的研制需要研究突破贮箱等大型结构件以及200t级大推力氢氧火箭发动机关键组件相关材料、结构、工艺和工艺装备等方面的制造技术;继承已有航天产品制造经验,与现有材料、装备技术和能力发展实际结合,保证型号研制顺利进行;同时发展新材料与先进工艺技术,为型号产品研制以及进一步改进奠定基础。     

基于MapX的航迹显示及告警系统的开发

利用MapInfo公司的MapX控件完成航迹显示及告警系统的开发。项目实践效果表明,此系统满足用户对试验任务的多目标航迹显示要求,实现了试验区域的地理图层缩放、经纬度高程数值显示、颜色图符设置、本机测控设备自动判读目标数据并向中心告警等功能。     

水凝物对THz波辐射的衰减研究

文章基于水凝物粒子尺寸与THz波长的大小关系,分别利用Rayleigh近似、Mie理论以及几何光学方法计算了降雨和云雾引起THz波辐射的散射衰减。比较了不同强度的降雨和不同能见度、含水量的云雾对THz波的散射衰减。结果表明,随着频率的增大,THz波段雨衰减先增大后减小;在整个THz波段,含水量较小或能见度较低的云雾的衰减随频率的增大而单调增加,含水量较大或能见度较大的云雾的衰减随频率先增大后减小;在THz波段云雾衰减随能见度的减小和含水量的增加而增大,温度对THz波段的云雾衰减影响不大,在整个THz波段并不存在明显的规律。在THz波频率高端云雾影响较降雨要严重的多。     

A salient edges detection algorithm of multi-sensor images and its rapid calculation based on PFCM kernel clustering

Multi-sensor image matching based on salient edges has broad prospect in applications, but it is difficult to extract salient edges of real multi-sensor images with noises fast and accurately by using common algorithms. According to the analysis of the features of salient edges, a novel salient edges detection algorithm and its rapid calculation are proposed based on possibility fuzzy C-means （PFCM） kernel clustering using two-dimensional vectors composed of the values of gray and texture. PFCM clustering can overcome the shortcomings that fuzzy C-means （FCM） cluster- ing is sensitive to noises and possibility C-means （PCM） clustering tends to find identical clusters. On this basis, a method is proposed to improve real-time performance by compressing data sets based on the idea of data reduction in the field of mathematical analysis. In addition, the idea that kernel-space is linearly separable is used to enhance robustness further. Experimental results show that this method extracts salient edges for real multi-sensor images with noises more accurately than the algorithm based on force fields and the FCM algorithm; and the proposed method is on average about 56 times faster than the PFCM algorithm in real time and has better robustness.     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

Investigations into sensing characteristics of circular thin-plate electrostatic sensors for gas path monitoring

Circular thin-plate electrostatic sensors are promising in gas path monitoring due to their advantages of non-intrusiveness and easy installation. The spatial sensitivity and filtering effect are two important performance parameters. In this paper, an analytically mathematical model of induced charge on a circular thin-plate electrode is first derived. Then the spatial sensitivity and filtering effect of the circular electrostatic sensor are investigated by numerical calculations. Finally,experimental studies are performed to testify the theoretical results. Both theoretical and experimental results demonstrate that circular thin-plate electrostatic sensors act as a low-pass filter in the spatial frequency domain, and both the spatial filtering effect and the temporal frequency response characteristics depend strongly on the spatial position and velocity of the charged particle. These conclusions can provide guidelines for the optimal design of circular thin-plate electrostatic sensors.     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

An extended chirp scaling algorithm for spaceborne sliding spotlight synthetic aperture radar imaging

A system impulse response with low sidelobes is critical in synthetic aperture radar（SAR） images because sidelobes contribute to noise and interfere with nearby scatterers. However,the conventional tricks of sidelobe suppression are unable to be exactly applied to the case of spaceborne sliding spotlight SAR due to great azimuth shifts in both time and frequency domains. In this paper, an extended chirp scaling algorithm is presented for spaceborne sliding spotlight SAR data imaging. The proposed algorithm firstly uses the spectral analysis（SPECAN） technique to avoid the azimuth spectrum folding effect and then employs the chirp scaling（CS） algorithm to achieve data focusing, i.e., the so-called two-step approach. To suppress the sidelobe level, an efficient strategy for the azimuth spectral weighting which only involves matrix multiplications and short fast Fourier transformations（FFTs） is proposed, which is a post-process executed on the focused SAR image and particularly simple to be implemented. The SAR image processed by the proposed extended CS algorithm is very precise and perfectly phase-preserving. In the end, computer simulation results verify the analysis and confirm the validity of the proposed algorithm.     

扩压叶栅最佳弯叶片生成线与进口马赫数之间的关系

为了研究扩压叶栅最佳弯叶片生成线与叶栅进口马赫数之间的关系,用优化的方法,在八个不同进口马赫数下对弯叶片生成线(积叠线)的弯角和弯高进行优化,优化的目标函数为叶栅总压损失系数。结果表明:在同一弯角下,弯叶片总压损失系数随弯高的增大而减小,弯高为50%时总压损失系数最小,最佳弯叶片生成线的弯高为50%。在同一弯高下,总压损失系数随弯角增大呈现类似抛物线的形式的变化规律,存在着一个最佳弯角使总压损失系数最小。在不同进口马赫数下,最佳弯角随着进口马赫数的增加而增大,通过三次多项式曲线拟合得到了一个相对准确的最佳弯角与进口马赫数之间的关系。     

转子-支承耦合结构的模型修正研究

在转子-支承耦合结构的动力学分析过程中,结构模态参数计算结果与实验测试结果往往存在较大差异。针对此问题,应用优化算法对结构动力学模型进行修正,使计算模型能更准确地反映结构特性。建立由梁单元、盘单元、弹性支承单元组成的结构动力学有限元模型;选择优化目标函数、设计参数,并对各参数进行灵敏度分析。应用粒子群算法对选取的设计参数进行优化,得到最优模型。利用转子-滚动轴承实验器进行验证,结果表明,方法能够有效地实现转子-支承耦合结构的动力学模型修正,修正后模型更接近实际结构。