基于PCI总线的PC机再入遥测站设计

根据再入遥测的特点 ,提出基于 PCI总线和 Windows平台的 PC机再入遥测站的体系结构 ,重点对其关键技术即多通道高速数据的实时传输与存储技术进行研究     

小波变换在遥测信号检测中的应用

为了更好地分析和处理弹载固态记录仪所记载的助推火箭在发射时对弹体的冲击和振动信号，本文利用小波变换所具有的空间局部化性质，在对原始采样数据的奇异性及奇异性位置和奇异度的大小的分析中，以及在导弹型号试射实验的后视数据分析中，取得出了良好的分析效果。     

基于绝对速度测量计的自主导航探讨

对用激光原理进行绝对速度测量和由它实现自主导航的概念进行了探讨。利用3个陀螺仪和3个激光测速计按直角坐标方式配置,即可组成基于绝对速度测量计的捷联式惯性测量组合。这种方法的优点是简化计算和有利于提高精度。     

航天器姿态调整时的变结构控制与振动抑制方法

基于Hamilton变分原理,采用Timoshenko梁理论,对带有柔性附件的航天器建立了中心刚体—柔性梁的动力学模型。研究了调姿时带有柔性附件的航天器的动力学与控制问题,给出了问题的滑模变结构控制方法。基于Lyapunov方法证明了姿态的渐近稳定性。利用数值仿真过程讨论了卫星姿态角和姿态角速度的变化规律。最后,利用仿真结果验证了变结构控制方法的可行性和有效性。     

Precipitating Protons and Their Role in Ionization of the Polar Ionosphere

Spatial distributions of the electron density in the latitude range 60°–90° N were calculated on the basis of a physical model of the E and lower Fregions of the high-latitude ionosphere using statistical models of auroral proton and electron precipitation. It is shown that precipitating protons can play the key role in the ionization of the Eregion in the dusk and midnight sectors of the auroral oval. However, quantitative estimates of the contribution of protons to the ionization depend on the used statistical models of electron precipitation. Comparison of the electron density profiles calculated for two incoherent scatter radars, EISCAT (Tromsö) and ESR (Svalbard), for simultaneous precipitation of electrons and protons and for electron precipitation only show that the influence of protons is the most significant in the dusk sector over the EISCAT radar and in the midnight sector over the ESR radar. The results presented indicate the need to take protons into account when radar data are used to derive precipitating electron spectra.     

导弹子母弹子弹抛撒弹道模型及数字仿真

建立了导弹子母弹抛撒弹道模型，并编制了抛撒弹道仿真程序，仿真结果与靶场试验结果一致，仿真程序也适用于所有弹道导弹子母弹撒 轴对称子弹的无控弹道仿真，可为地地导弹子母作战使用及作战效能研究提供强有力的分析工具。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

斜切反喷管流场的数值模拟

为了在级间分离期间提供反推力，许多固体火箭发动机前端都装有一组斜切反喷管。由于反喷管的气动型面具有许多尖点，并且在超声速区有一个台阶，喷管内存在一系列激波，而且亚声速区和超声速区互相混杂。本文用时间相关法数值模拟了反喷管流场，控制议程用Ｍａｃ Ｃｏｒｍａｃｋ显格式求数值解，边界参数采用物理边界条件和从双特征线方法推导来的有效的特征方法为计算，为于固壁边界点，在不同的区域采用不同的方法对计算方程组求