基于产品全生命周期的工艺信息模型

工艺信息模型是工艺数字化系统的基础,是实现产品信息集成与管理的关键。本文提出了完整意义上的工艺设计,包括基于产品的装配工艺规划、基于零件的加工工艺规划和基于客户服务的产品服务工艺规划;分析了工艺规划与产品全生命周期各阶段的关系;论述了产品设计模型向工艺信息模型的转化过程。     

Review of flow control mechanisms of leading-edge vortices

Vortex control concepts employed for slender and nonslender delta wings were reviewed. Important aspects of flow control include flow separation, vortex formation, flow reattachment, vortex breakdown, and vortex instabilities. The occurrence and relative importance of these phenomena strongly depend on the wing sweep angle. Various flow control methods were discussed: multiple vortices, control surfaces, blowing and suction, low-frequency and high-frequency excitation, feedback control, passive control with wing flexibility, and plasma actuators. For slender delta wings, control of vortex breakdown is achieved by modifications to swirl level and external pressure gradient acting on the vortex core. Effects of flow control methods on these two parameters were discussed, and their effectiveness was compared whenever possible. With the high-frequency excitation of the separated shear layer, reattachment and lift enhancement in the post-stall region is observed, which is orders of magnitude more effective than steady blowing. This effect is more pronounced for nonslender wings. Re-formation of vortices is possible with sufficient amplitude of forcing at the optimum frequency. Passive lift enhancement on flexible wings is due to the self-excited wing vibrations, which occur when the frequency of wing vibrations is close to the frequency of the shear layer instabilities, and promote flow reattachment.     

THE RESEARCH OF INCREASING LIFT ANDREDUCING DRAG FOR WING-TIP SAILS

ＴＨＥＲＥＳＥＡＲＣＨＯＦＩＮＣＲＥＡＳＩＮＧＬＩＦＴＡＮＤＲＥＤＵＣＩＮＧＤＲＡＧＦＯＲＷＩＮＧ－ＴＩＰＳＡＩＬＳＣｈｅｎＭｉｎｇｙａｎ，ＱｉＭｅｎｇｂｕ（ＮａｎｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓ，...     

Nondestructive Characterization of RBSOA of High-Power Bipolar Transistors

Reverse-bias safe operating area (RBSOA) of high-power Darlington transistors is characterized using a 120 A/1000 V nondestructive reverse-bias second breakdown tester designed and fabricated at Virginia Polytechnic Institute and State University. Elaborate RBSOA characteristics are generated with different forward/reverse base drives and collector current levels. The effects of elevated case temperature and second-base drive on RBSOA of four-terminal Darlington devices are also discussed.     

米定义发展的启示

通过简要介绍米定义发展的历史，人们从中得到的启示是：这样严密的定义，还在不断地进行修改，使其更加完善。诸如量块长度的定义、测量方法、测量原理和测量可靠性的评估等原来的定义和规定也断地更晚是理所当然的事。     

分布式航空电子系统信息传输机构设计研究

 航空电子系统日益增长的复杂性使其必须走向分布式处理的道路。本文介绍一个基于1553B总线的分布式航空电子系统的实验模型——EPDAS系统,讨论了EPDAS系统信息传输机构的有关组成部分:总线通信协议、通信管理软件和总线接口,本文在分析传统的同步总线控制方式的缺点之后,提出了询问和命令/响应相结合的总线控制方式,该方式能提高总线传输的效率和实时性。在EPDAS系统的总线接口设计中,引入了流水线并行处理技术,解决了总线接口的瓶颈问题,并使之易于VLSI化;伪DMA控制的概念,使总线接口电路更加简化;共享存贮器的互连技术,具有效率高、控制简单、容易实现等优点。EPDAS系统结构合理、效率高,符合国情、适合于新一代的飞机。     

六喷管超音速引射器性能的理论分析和实验研究

对某一定尺寸的六喷管超音速引射器进行气动性能的实验研究。结果表明：随着主次流压比Ｐ＊ｐ／Ｐ＊ｓ增加，引射系数及修正引射系数下降；当引射系数增加时，混合管动量修正系数Ｋｍ下降，但主喷管流量系数μ变化不大。对上述工况进行理论计算的结果与实验数据符合良好。     

Phased array of large reflectors for deep-space communication

In this paper the problem of uplink array calibration for deep-space communication is considered. A phased array of many modest-size reflectors antennas is used to drastically improve the uplink effective isotropic radiated power of a ground station. A radar calibration procedure for the array phase distribution is presented using a number of in-orbit targets. Design of optimal orbit and the number of calibration targets is investigated for providing frequent calibration opportunities needed for compensating array elements phase center movements as the array tracks a spacecraft. Array far-field focusing based on the near-filed in-orbit (low Earth orbit (LEO)) calibration targets is also presented and array gain degradation analysis based on the position error of the array elements and in-orbit targets has been carried out. It is shown that errors in the in-orbit targets positions significantly degrade the far-field array gain while the errors in array elements positions are not very important. Analysis of phase errors caused by thermal noise, system instability, and atmospheric effects show insignificant array gain degradation by these factors     

仿真与响应曲面法的结合及其在综合生产计划中的应用

 论述响应曲面法与仿真相结合的优化结构,着重讨论了一阶和二阶响应曲面的仿真拟合原理和寻优过程,从而可在仿真环境下给出最优决策参数。利用所开发的GASPRSM仿真优化软件,对飞机工厂生产计划安排进行了仿真运行,证明可以取得显著的经济效果。     

基于Riccati方程的离散容错控制系统设计

基于离散系统的Ｒｉｃｃａｔｉ方程，提出一种对传感器失效具有完整性的离散控制系统的设计方法，给出了完整性设计方法的设计步骤，并用设计实例验证了该方法的有效性．该方法还可推广用于执行器失效的情况．