Cooperative Routing for Maximizing Network Performance of Wireless Networks

To greatly increase spectral efficiency and improve network performance in wireless networks,a novel cooperative routing algorithm,namely maximum throughput cooperative routing(MTCR) algorithm,is proposed.According to cooperative link model,throughput analysis is presented to evaluate performance improvement in the process of exploiting cooperative commu-nication from physical layer to higher layer.Taking the throughput improvement as performance metric,a cooperative relay se-lection scheme is developed.Finally,based on the route constructed by adaptive forwarding cluster routing(AFCR) algorithm,each node on the route selects the optimum cooperative node from all the potential cooperative nodes to construct the coopera-tive link with maximum throughput so that cooperative route with maximum network throughput from source to destination can be set up.Simulation results show that compared with the noncooperative routing algorithm and minimum power selection de-code-and-forward(MPSDF) routing algorithm,the proposed algorithm can obviously improve network throughput in the pres-ence of low transmission power,large number of nodes and high spectral efficiency.     

固定管板式换热器的危险工况分析和管、壳应力在设计中的作用

本文在前文的基础上,阐明危险工况(或称可能出现的危险工况)和真正危险工况之间的区别和联系,仅由操作条件只能列出危险工况而无法得出真正的危险工况,真正的危险工况不仅和操作条件有关,而且和换热器的结构条件和各部件相对尺寸有关。 根据换热器的具体结构条件、各元件相对尺寸和危险工况,管板、管子或壳体应力的最大值都有可能首先超过各自的强(刚)度校核条件。所以,在设计时不论管板、管子或壳体都应由各个危险工况求出其可能出现的最大应力值并校核满足,不能以并非最大的应力值进行校核,更不能因管子或壳体应力(特别是带有膨胀节时)绝对值较低而认为其强度不会成为问题,甚至不予计算。     

CRESDA Support Japan for Earthquake Recovery

A 9.0 magnitude earthquake hit the east coast of Honshu, Japan (38.23°N and 143.19°E) on March 11, 2011. A massive tsunami trig- gered by the earthquake led to causalities,     

Analysis of CHARTER Applied for Yushu Earthquake Relief

Natural disasters are common threats to all human beings. With the background of global climate change, major natural disasters have occurred frequently in the last few years and caused heavy casualties with high property losses. Satellite Earth ob-servation has been playing a more and more important role in monitoring and     

纳米CuO/AP复合粒子的制备及催化性能研究

采用溶剂-非溶剂法制备出了以纳米CuO为核、AP为壳的CuO／AP复合粒子。TEM、KRD及从的测试结果表明。复合粒子中只有CuO和AP存在,且AP包覆于CuO的外表,而DSC对复合粒子催化性能的测试结果表明。纳米CuO／AP复合粒子中AP的高温分解峰温度下降到101℃,较CuO-AP的简单混合物提前了5．64℃,而且复合粒子中AP的低温分解峰消失,在完成由斜方晶系向立方晶系的晶型转变后,便直接进入了高温分解,这为改善推进剂燃速提供了一条可行途径。     

SEP数值法在寿命预测中的应用

 为了预测精密构件如涡轮盘材料的蠕变-疲劳寿命,经实践证明应变能区分法（SEP）优于应变范围区分法（SRP）,特别是对高强度低延性材料,SEP的优越性更明显。     

几种高性能纤维的表面性能及其对界面粘接的影响

分别使用扫描电镜和X射线光电子能谱仪，对T-800炭纤雏、F-12有机纤维及新型超高强度PBO纤雏(聚对苯撑苯并双嗯唑)进行了物理与化学表征和分析，用SEM观察得出这三种纤雏表面物理形态差别清晰可见，T-800纤雏表面沟槽深且直径小，PBO纤雏表面极光滑且直径中等，F-12纤维直径最大且表面有微小沟槽。XPS定量分析表明，这三种纤维表面活性也不一样，T-800纤维表面活性较多，PBO纤维表面活性最差。纤维表面状态的差异体现在它们与树脂复合后的材料界面粘接性能上，T-800纤维的界面剪切强度(IFSS)高，F-12纤雏次之，PBO纤雏最差。     

关于互斥方案决策问题的研究

互斥方案决策时，运用净现值和内部收益率指标，经常遇到结论相矛盾的情况，本文主要应用方案重复法和投资增额评价法解决这一问题。     

差分GPS在空间交会中的应用

差分GPS可以提高相对定位精度,它在空间交会导航中的应用引起了人们的关注。本文旨在研究在空间交会过程中长距离段差分GPS的精度。文中提出了一种观测模型线性化的新方法,这种方法不需要绝对定位,因此计算量小,而且精度不受两站距离变化的影响。计算机仿真取得了令人满意的结果,表明差分GPS在空间交会的中长距离段导航能满足要求,文中提供的新方法也是可行的。     

外层空间导弹非线性渐近稳定姿态控制律设计

首先将外层空间导弹姿态控制系统非线性模型的六个状态变量分别进行线性变换及非线性变换, 然后采用非线性状态反馈方法将原非线性系统变换为一渐近稳定的线性系统, 得到了相应的非线性姿态控制律。最后通过仿真证明了本控制方法的有效性