SCP－1型贴片机PLC程序的设计

介绍了在研制ＳＣＰ－１型贴片机过程中，采用可编程控制器（ＰＬＣ）对各外设进行控制的程序编制过程。着重分析了串行口通讯协议的设置，并以吸片过程为例，具体地说明了ＰＬＣ程序的编制方法。     

Implementation of a three-phase high-power-factor rectifier with NPC topology

A three-phase four-wire power factor corrector based on neutral-point-clamped (NPC) topology is adopted to reduce the current harmonics and increase the input power factor. Using the NPC topology, the voltage stress of power switches can be reduced to the half of the dc-link voltage. With the dc-link voltage controller and the phase locked loop circuit, the balanced and sinusoidal line currents can be drawn from the ac supply system under the balance and unbalance mains voltages. The hysteresis current comparators are adopted in the current control loop to track the line current commands. Three voltage levels are generated on the ac terminal to the neutral point. Simulations and experiments are provided to verify the validity and the effectiveness of the proposed control scheme.     

波导分支线定向耦合器计算方法

利用模匹配方法和网络理论分析计算了一种卫星天线系统中常用的波导分支线定向耦合器,计算结果与实验结果非常吻合。该方法为波导分支线定向耦合器提供一种有力的设计手段。它可直接用于设计Ku 波段通信卫星天线的波束形成网络,也可以用来设计各种耦合度的波导分支线定向耦合器。     

纵向短周期模态试飞方法和选择

对几种纵向短周期模态试飞方法及其适用性进行了初步分析。结合实际飞行经验,提出了初步判断飞机短周期特性及选择试飞方法。     

飞机横侧动稳定性及反应的奇异摄动理论

应用奇异摄动法分析横侧小扰动运动的动稳定性问题,将四阶问题分解为小根、大根和复根模态,它对应于经典理论中的螺旋、滚转和荷兰滚模态,并给出了动态反应过程的解。     

三维模型中关键特性标注和提取的实现

关键特性作为"少数重要"的产品信息,是保证产品质量和顾客满意度的重要因素,其指定和标识需要与三维模型相结合才具有更直观的意义,同时也方便对其进行更有效的管理.本文给出了关键特性的定义和分类,提出了三维模型中关键特性的标注方法,通过对UG进行二次开发,实现了关键特性的属性添加和信息提取,并通过某型导弹弹头舱段壳体零件进行了验证.     

Earthshine and Asteroseismology Telescope (East) Network

Several automated optical telescopes have been setup at appropriate longitudes around the globe to study earthshine variations and asteroseismology. The first telescope has been setup at Teide Observatory, Tenerife, Spain in October 2004. The intensity of earthshine relates to the average of Earth’s albedo, and in turn relates to the global temperature of the Earth. A global network is necessary because each site can measure the earthshine reflected from only a part of the Earth. The network will also be used for asteroseismology study. It can measure photometric variations of pulsating stars. The long-term and continuous measurements allow the accurate determination of mode frequencies of stellar pulsations, which provides information on the properties of stellar interior.     

中心极限定理用于近似计算时必须注意的问题

本文着重指出,在运用中心极限定理近似计算独立同泊松分布随机变量之和的概率时,通常只注意了取n适当大的值,从而导致了差异较大的不同结果。本文指出了不仅要使n适当的大,而且也要使nλ足够地大。当X_h是其他离散型随机变量时,也要考虑类似的问题。     

对“ZY-1”FM1整星热平衡、热真空试验中有效载荷被污染情况的分析

介绍了卫星在热平衡试验后所发现的有效载荷的污染情况,通过对污染提取物的分析和试验设备的再次污染监测,找出了污染源,并对以后的防污染工作提供了借鉴.     

变轨发动机不等量截尾试验可靠度评估

对于可靠度要求极高和任务时间以小时计的变轨发动机来说，目前广泛采用以铌合金为材料并喷涂以抗高温氧化涂层方案的推力室，这一类发动机在方案试验阶段结束后的研制试验中往往只出现截尾试验的结果。给出了不等量截尾试验结果的可靠度评估方案。