固体推进剂裂纹内点火过程流固耦合数值仿真

利用CFX和ANSYS模拟了固体推进剂裂纹内点火阶段的流固耦合过程.流场边界添加源项模拟装药燃烧的质量添加,CFX计算得出的压强值和ANSYS计算得出的边界位移在2个软件之间传递,实现流固耦合仿真过程.仿真结果表明,裂纹内部燃气压强随时间先增大后减小,之后逐渐稳定;药柱最大应力随时间变化呈波动状态,最大变形量随时间持续...     

永磁约束电子束轨迹实验研究

通过设计并运用一种直流电子束轨迹简易测量方法,开展了永磁约束电子束轨迹实验研究,得到了永磁铁环对60~80 ke V电子束约束作用的实验数据。结果表明:该测量方法方便有效,结果较为准确;永磁铁对电子束聚焦作用明显,并呈现出一定的规律性。对永磁铁约束电子束研究工作奠定了基础。     

Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.     

氢氧发动机装配单元制造模式研究

通过对氢氧发动机的流程进行研究分析,从工艺合理性和并行作业等方面对工艺流程进行优化,将串行装配流程改进为并行装配流程,固定各作业子单元的人数需求,合理调配人员使用,缩短装配周期,提高发动机装配效率,使氢氧发动机装配从研制单件生产模式向批生产模式转化,显著提高了发动机装配的交付能力。     

等离子鞘套热力学波动对电磁波传播的影响

针对等离子鞘套热力学波动造成电磁波传播特性变化的问题,结合湍流理论、等离子理论和电磁波传播理论,得到了热力学参数波动与介电常数间的关系。计算了不同状态下热力学参数波动引起S和Ka波段电磁波透射和反射系数的变化。结果表明,当电子密度增大,S波段反射系数变化减小、透射系数变化增大;当Ka波段在碰撞频率10MHz时,反射系数变化增大、透射系数变化减小,在碰撞频率1GHz和50GHz时透射系数变化反射系数变化先增后减。不同高度下波动的影响也不同,S波段透射和反射系数变化随高度升高先减后增;Ka波段透射系数变化先减后增、反射系数变化先减后增而后再次减小。因此,应根据实际环境状态获得波动的包络范围,进而针对性开展测控通信系统设计。     

高性能纤维的可织性研究进展

高性能纤维的可织性反映了高性能纤维在织造成形加工中的抗损伤能力,其优劣直接影响织造效率和最终复材制品的性能和质量。本文内容涉及碳纤维、玻璃纤维、芳纶纤维和多种无机陶瓷纤维的可织性研究。主要介绍了高性能纤维的三维机织损伤表征与优化技术,阐述了其可织性评价方法的研究现状与进展,归纳了不同类型高性能纤维织造适应性的改善方法,最后提出了本领域亟待解决的问题和主攻方向。     

小型磁偏转质谱计性能实验研究

自主研发了小型磁偏转质谱计,并对其质量范围、分辨本领、灵敏度和最小可检分压力四个主要性能指标进行了实验测试和比对。结果表明,该质谱计的质量范围为（1~143）amu,相对N₂的分辨本领为1400,灵敏度为4.2×10^-5 A/Pa,最小可检分压力为9.5×10^-7 Pa。该测试和比对结果为磁偏转质谱计进一步的优化设计和性能提高奠定了重要基础。     

一种虹膜特征提取与匹配方法

人眼虹膜尺寸很小,并且容易受到干扰,如果不能有效地提取出稳定的虹膜特征进行模式匹配,将严重影响虹膜识别的准确性和鲁棒性。本文提出一种稳定的虹膜特征提取与匹配方法,在虹膜注册端通过构建强特征分类器获得增强型特征模板,在虹膜识别端通过多样本特征映射融合提取稳定的特征样本,并根据风险预测自适应地确定分类阈值,然后进行特征匹配与虹膜分类,从而有效提高虹膜识别的准确性和鲁棒性。