航天遥感成像系统像元分辨率在轨检测方法研究

文章采用数学推导和图解模拟的方法,通过分析光电成像系统对三线靶标推扫成像的过程,说明使用三线靶标检验系统像元分辨率存在误差,可能得不出或得不到正确的结果,应使用辐射状靶标。     

8m×6m 风洞测控处系统

８ｍ×６ｍ风洞测控处系统以ＶＡＸ－Ⅱ为上位机,通过ＱＢＵＳ总线连接数据采集、速压控制、模型姿态角控制和数据实时分析与显示等四个子系统,完成对风洞试验的管理和数据测量与分析及显示。本文介绍了该系统的构成、主要功能和技术指标等。     

基于光束偏转层析技术的Radon变换迭代法

本文通过计算机模拟研究,利用气体温度场的先验知识,考查了将Ｒａｄｏｎ变换迭代法用于光束偏转层析技术重建三维温度场的重建精度。作为一个应用实例,测试了电弧某截面上的温度分布。     

不同密度弹丸对水冰的超高速撞击成坑实验

为了研究冰冻天体表面撞击坑的形成与演化,开展了水冰的超高速撞击成坑实验。使用二级轻气炮发射1.0 mm直径的球形弹丸,以3 km/s、5 km/s和7 km/s速度对圆柱状冰块进行撞击。弹丸材料包括聚碳酸酯和不锈钢两种,冰块温度为253 K。实验观察到了不同弹丸和不同速度条件下,冰块中撞击坑的形貌特征。对撞击坑直径、深度和剖面形状进行了测量,并与文献中铝弹丸对水冰的撞击坑进行了比较分析。获得了水冰撞击坑特征随撞击参数的变化规律,结果表明：撞击坑直径和深度的主导机制不同,坑深主要由弹丸侵彻作用形成,而坑径主要由冰块的剥落所致;坑深比坑径具有更强的对于弹丸密度的依赖性,高密度弹丸撞击坑直径具有比低密度弹丸更强的对于撞击速度的依赖性;撞击坑体积与撞击能量成正比,高密度弹丸形成的撞击坑直径表现出“能量缩比”行为,而低密度弹丸形成的撞击坑直径表现出“动量缩比”行为。     

基于Matlab语言的系统可靠性仿真

Matlab是一种高性能数值计算语言 ,本文用Matlab语言编制系统可靠性仿真程序 ,并给出了具体实例。此方法比其他方法简单有效 ,可适用于复杂系统。     

Relay selection in cooperative communication systems over continuous time-varying fading channel

In this paper, we study relay selection under outdated channel state information (CSI) in a decode-and-forward (DF) cooperative system. Unlike previous researches on cooperative commu-nication under outdated CSI, we consider that the channel varies continuously over time, i.e., the channel not only changes between relay selection and data transmission but also changes during data transmission. Thus the level of accuracy of the CSI used in relay selection degrades with data transmission. We first evaluate the packet error rate (PER) of the cooperative system under contin-uous time-varying fading channel, and find that the PER performance deteriorates more seriously under continuous time-varying fading channel than when the channel is assumed to be constant during data transmission. Then, we propose a repeated relay selection (RRS) strategy to improve the PER performance, in which the forwarded data is divided into multiple segments and relay is reselected before the transmission of each segment based on the updated CSI. Finally, we propose a combined relay selection (CRS) strategy which takes advantage of three different relay selection strategies to further mitigate the impact of outdated CSI.     

无人直升机旋翼桨叶设计及动力学特性分析

复合材料在桨叶上广泛应用的同时使桨叶的受力、刚度特性比传统的桨叶更为复杂。为了降低桨叶工作时动应力和旋翼的振动水平,有必要对旋翼桨叶进行动力学特性分析。对旋翼总体参数及桨叶气动参数进行设计,采用CFD 方法对旋翼悬停状态进行气动特性分析,将桨叶三维非线性弹性模型分解为二维线性剖面模型和一维非线性梁模型进行动力学特性分析。结果表明：该旋翼能够成功拉起230 kg 级无人直升机,悬停效率大于0.65,工作转速下桨叶的固有频率与8 阶以下的气动激振力频率保持一定的范围,避开了转速共振区,满足桨叶动力学设计要求。     

XB14型精密石英谐振器的研制

XB14型精密石英谐振器是为现代通信、导航和航天飞行器工程系统及地面高稳晶振研制的一种小型晶体频率控制元件。该谐振器采用了硬玻璃扁平壳和高频感应真空封接技术,具有体积小、密封性好、无封接污染,高可靠和低老等特点,它的频率范围在5～250MHz,老化率在10~(-8)～10~(-9)/d量级。     

Solar sail formation flying on an inclined Earth orbit

The versatility of solar sail propulsion can be utilized in the exploration of Earth’s magnetotail. An inclined periodic orbit with respect to ecliptic is possible for a solar sail with its orbital plane in synchronous rotation with the sun. Solar sail evolving on such an inclined orbit is free of Earth shadow. Formation flying of a cluster of sails around such an inclined periodic orbit is investigated in this paper. The solution of the first-order approximation to the linear relative motion is used to qualitatively analyze the configurations of relative orbits. Since the relative motion is unstable, active control is necessary to keep a periodic relative motion. A typical LQR method is employed to stabilize the relative motion. The design method is validated by numerical examples.