VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

多普勒雷达导引头信号处理技术

概述防空导弹多普勒雷达导引头信号的基本形式、主要特点、检测原理及其滤波系统；介绍了多普勒雷达导引头信号处理的一些常用技术。     

数控技术在卫星型号零件加工中的应用

文中讲述了数控加工技术在北京空间机电研究所承担的型号产品零件制造中的应用。主要涉及异形零件的编程和加工,使用参数编程的一些技巧和经验,以及使用自动编程软件在数控编程所取得的一些经验。     

气体渗碳过程的动态控制

利用气体渗碳物质传递数学模型来仿真计算碳浓度分布，并根据计算结果在计算机上拟合出碳浓度与时间、温度、气氛碳势之间的关系式，此关系式对气体渗碳的动态控制具有指导意义。     

TC4钛合金的微动磨损及防护

对Ｔｉ－６Ａｌ－４Ｖ合金在１８℃，１００℃２５０℃下的微动磨损特性及防护工艺进行了研究。表明：该合金微动磨损的主要磨损形式是疲劳脱层，其磨损量随温度升高而下降，高渐微动磨损量与磨损区表面所形成的氧化层的性质及厚度有关。     

电子吊舱环境控制系统设计的新技术

针对我国军用电子设备吊舱载机电源紧张,国产电子元器件耐温性能相对较差,对环境控制系统要求较高的特点,本文提出了一种新型用冲压空气驱动的环境控制系统.该系统采用"蓄冷节能"的设计思想和逆升压回冷技术,并配备具有智能功能的测控子系统.为克服冲压空气压头低的困难,利用空气动力学理论,提高进气道总压恢复系数,扩大系统进出口压差,从而获得较大涡轮膨胀比.试验结果证明所设计的吊舱环控系统具有良好的制冷性能和经济性.     

随机多变量连续系统的辨识

本文讨论了由随机向量微分方程描述的多变量连续系统的辨识问题。虽然假定微分方程中的噪声项是白噪声,但是用方脉冲函数积分微分方程后,所得到的代数方程中的噪声项却是有色噪声。为了得到无偏的参数估计,本文提出一种预滤波方法。仿真例子表明这种方法是很有效的。     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。     

星光对机动弹道导弹主动段的修正

 <正> 以惯性技术为主,并以星光、无线电等其它技术为辅的组合导航及制导技术是70年代以来发展较为迅速,并被认为是行之有效的技术手段。特别是对于大型航空航天飞行器。例如航天飞机、远程导弹等,只有采用精密的组合导航技术才能保证这类飞行任务的完成。任何单一的导航及制导技术都有其长处及弱点,将这些单一的技术手段组合起来扬长避短、相互补偿,毫无疑问是一种可行的途径。星光的引进将会使对