Numerical investigation on jet interaction with a compression ramp

A numerical investigation on jet interaction in supersonic laminar flow with a compres- sion ramp is performed utilizing the AUSMDV scheme and a parallel solver. Several parameters dominating the interference flowfield are studied after defining the relative increment of normal force and the jet amplification factor as the evaluation criterion of jet control performance. The computational results show that most features of the interaction flowfield between the transverse jet and the ramp are similar to those between a jet and a flat plate, except that the flow structures are more complicated and the low-pressure region behind the jet is less extensive. The relative force increment and the jet amplification factor both increase with the distance between the jet and the ramp shortening till quintuple jet diameters. Inconspicuous difference is observed between the jet-before-ramp and jet-on-ramp cases. The variation of the injection angle changes the extent of the separation region, the plateau pressure, and the peak pressure near the jet. In the present computational conditions, 120 is indicated relatively optimal among all the injection angles studied. For cold gas simulations, although little influence of the jet temperature on the pressure distribution near the jet is observed under the computation model and the flow parameters studied, reducing jet temperature somehow benefits the improvement of the normal force and the jet efficiency. When the pressure ratio of jet to freestream is fixed, the relative force increment varies little when increasing the freestream Mach number, while the jet amplification factor increases.     

Parameter optimization of controllable local degree of freedom for reducing vibration of flexible manipulator

 Parameter optimization of the controllable local degree of freedom is studied for reducing vibration of the flexible manipulator at the lowest possible cost. The controllable local degrees of freedom are suggested and introduced to the topological structure of the flexible manipulator, and used as an effective way to alleviate vibration through dynamic coupling. Parameters introduced by the controllable local degrees of freedom are analyzed and their influences on vibration reduction are investigated. A strategy to optimize these parameters is put forward and the corresponding optimization method is suggested based on Particle Swarm Optimization (PSO). Simulations are conducted and results of case studies confirm that the proposed optimization method is effective in reducing vibration of the flexible manipulator at the lowest possible cost.     

Robust design of NLF airfoils

 A robust optimization design approach of natural laminar airfoils is developed in this paper. First, the non-uniform rational B-splines (NURBS) free form deformation method based on NURBS basis function is introduced to the airfoil parameterization. Second, aerodynamic characteristics are evaluated by solving Navier-Stokes equations, and the γ-Re_θt transition model coupling with shear-stress transport (SST) turbulent model is introduced to simulate boundary layer transition. A numerical simulation of transition flow around NLF0416 airfoil is conducted to test the code. The comparison between numerical simulation results and wind tunnel test data approves the validity and applicability of the present transition model. Third, the optimization system is set up, which uses the separated particle swarm optimization (SPSO) as search algorithm and combines the Kriging models as surrogate model during optimization. The system is applied to carry out robust design about the uncertainty of lift coefficient and Mach number for NASA NLF-0115 airfoil. The data of optimized airfoil aerodynamic characteristics indicates that the optimized airfoil can maintain laminar flow stably in an uncertain range and has a wider range of low drag.     

高压压气机径向间隙分析

针对航空发动机高压压气机,综合考虑气动载荷、离心力载荷、温度载荷耦合作用,建立了压气机径向间隙分析模型,获得了3个典型工况下的流场特征以及叶片的变形、应力分布,高压压气机转子叶尖径向间隙沿轴向变化的分布规律以及轴流压气机转子与机匣的间隙范围.计算结果显示在设计点和转速最高点,斜流压气机转子叶尖与机匣发生碰磨,与试验结果一致,验证了计算方法的正确性,也为建立合理有效的压气机径向间隙分析方法提供了思路.     

采用长细管法进行脉动压力转捩探测的实验研究

为了简便地使用测量模型表面脉动压力特征的方法探测边界层转捩位置,需要研究脉动压力传感器接在传统测压模型外的适用性,即通过长细管将模型表面的脉动压力信号传递到脉动压力传感器上的方式是否可得到转捩的特征信号。首先采用信号发生器驱动扬声器,在无风条件下,测量了长细管对不同频率声压信号的传递损失情况。证明了所采用的长细管系统具有合适的工作频带。然后在西北工业大学NF-3低速风洞二元实验段、实验风速为30m/s的条件下,对弦长为800mm、展长为1.6m的翼型模型沿弦向进行了脉动压力信号测量,并通过改进的数据处理技术判断了模型表面的转捩位置。研究结果表明,采用长细管系统进行脉动压力方法转捩探测具有一定应用价值,值得进一步深入研究。     

“湾流”G500/G550远程双发涡扇公务机

正"湾流"G500/G550飞机是美国湾流航宇公司在"湾流"V公务机的基础上,改进研制的远程双发涡扇公务机。机翼(包括机翼上的操纵面)由沃特飞机工业公司和日本新明和工业公司负责设计和制造;荷兰斯托克航宇集团负责制造尾翼和后部地板;发动机由英国罗耳斯·罗伊斯德国公司提供;     

缝隙大小对高超音速分离流的影响

本文提出了一些缝隙大小对高超音速分离流影响的实验结果。结果表明,缝隙大小明显地影响分离区范围,缝隙加宽使分离区缩小;缝隙存在也改变了分离状态下控制翼面的压力分布与传热分布。     

大系统分散控制的非线性影响

 在大系统的控制问题中,除了递阶控制外,分散控制是另一种重要的控制方案。局部分散镇定近来受到重视。对各子系统的局部线性反馈,由于能源限制及其他因素,常引出非线性反馈。本文将研究这样的非线性对大系统稳定性的影响。     

目前我省在节能建筑发展中存在的问题与对策探讨

针对我省节能建筑发展的现状以及所存在的问题,本文详细地分析了问题产生的原因,并提出相应的解决这些问题的对策.