柔性空间飞行器的变结构控制

 本文研究了大型柔性结构空间飞行器的控制问题。采用设定模态法,将系统化为常微分方程组所描述的系统。此系统是非线性的,被控运动是绕中心毂体的转动机动运动,并详细的讨论了变结构控制规律的应用。     

D406A钢加工过程缺陷的早期发现和预防

研究了D406A超高强度钢应用于火箭发动机壳体中缺陷发生的形态,对缺陷发生的原因和机理进行了分析,提出了如何防止缺陷产生相应的解决措施。     

低Re数管内强化对流传热实验研究

分别应用螺旋线圈和扭带作为插入物，在Ｒｅ≤２．０×１０３下，研究管内水与管壁的传热强化，与光管传热作了比较分析。并归纳出强化传热Ｎｕ数及流动阻力系数ζ随Ｒｅ的变化规律，反映出螺旋线圈和扭带在低Ｒｅ下有不同程度的强化传热效果，但也相应地增加了流动阻力。文中对两种强化传热元件也作了相应的比较。     

航空发动机设计任务循环的选取

由某型发动机的未来使用任务推导了其设计飞行任务剖面和飞行任务混频,然后根据该发动机的高度－速度特性得出了其转速剖面。在该转速剖面下对发动机的压气机盘进行了应力和疲劳寿命计算,由计算结果得出该发动机设计任务循环的选取范围,认为：航空发动机的设计任务循环除0－最大－0、慢车－最大－慢车和巡航－最大－巡航3类循环以外,还应当包括对发动机构件疲劳寿命有较大影响的其它载荷循环,否则将造成设计载荷估计精度大大降低。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN

Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole algorithm (MLFMA) are investigated. A new approach based on control factors which is proven to be able to improve the computational efficiency and reduce the needed memory significantly as well as ensuring the proper precision. For three aircraft models, the improved MLFMA is employed to analyze their multi-frequency scattering characteristics. It is found that aircraft shape can influence radar cross section (RCS) in different frequency zones. Both the multi-frequency RCS reduction characteristics of shape stealth aircraft and the conventional aircraft with stealth design taken into account are investigated, and the results show that shape stealth exhibits significant RCS reduction in the resonance and high-frequency zones, and with a weaker influence in the Rayleigh zone. Compared with radar absorbing material (RAM), shape stealth yields a wider multi-frequency RCS reduction. The above-mentioned results can be applied to stealth design for multiple frequencies or even for all frequencies.     

基于MLFMA的飞行器锯齿边板散射特性分析

为精确求解散射问题,采用混合场积分方程、多层快速多极子算法(MLFMA, Multilevel Fast Multipole Algorithm)和共轭梯度算法的迭代技术,并改进了多极子模式数.金属球双站雷达散射截面(RCS,Radar Cross Section)的算例表明,该方法在保证精度的前提下,降低了内存和计算时间;分析了锯齿边板的电磁散射特性,总结了锯齿边板相对于直边板在不同角域内的RCS减缩特性以及RCS减缩与入射频率变化之间的关系:随着入射频率的增高,RCS减缩效果迅速提高,且垂直极化减缩效果较水平极化减缩效果好.该结论可以用来提高飞行器的隐身性能.      

软件无线电的可重构流处理器体系结构

 针对软件无线电中存在通用数字信号处理器（DSP）计算能力不足以及专用基带处理器缺乏扩展性的问题,提出了一种新的处理器：面向软件无线电的可重构流处理器及相应的专用指令集。仿真证明,该处理器的可重构设计具备指令集扩展能力,可以对多种无线通信标准甚至是新的通信标准提供支持;面向软件无线电的流体系结构和专用指令集保证了对多种高速无线基带信号的实时处理,运算能力是通用DSP的5~13倍。该处理器为软件无线电中的硬件设计难题提供了一种新的解决途径。     

GRECO建模在VC++4.0中的实现机制

GRECO(Graphical Electromagnetic Computing)技术是目前分析高频区复杂目标雷达散射截面(RCS)最有效方法之一.对复杂目标而言,应用GRECO方法的一个重要工作就是对目标的几何造型进行准确地建模,才能获得令人满意的结果.文中结合C-R样条建模理论,阐述了在Windows NT环境下利用VC+ +4.0与OpenGL为GRECO方法进行建模的机制.以标准体与复杂目标为实例,给出了与实验结果符合良好的RCS曲线,具有工程实用价值.      

鸟撞击叶片时的载荷模型

为了预估叶片的鸟撞击响应 ,首先要建立鸟撞击载荷模型。为此 ,开展了以下研究工作 :运用高速冲击动力学理论分析鸟撞击的物理过程 ;进行鸟撞击载荷试验 ;采用计算机数值模拟分析鸟撞击载荷的各种因素对叶片响应的影响。在综合运用上述研究结果的基础上 ,本文从鸟撞击载荷的冲量与加载持续时间的确定、力—时间函数的选择以及载荷空间因素的确定三个方面论述了有关的方法与原则 ,供建立鸟撞击载荷模型时参照使用