GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

一种新的六端口测量系统自校准方法

提出了一种新的六端口自校准方法.本方法从六端口相对功率理论出发,导出了六端口系统常数的自校准方程,给出了求解系统常数初值的方法,并利用梯度法对方程组求解,仿真结果表明用一个匹配负载、四个失配负载就可以解出系统常数.     

调制域测频原理及工程实现

介绍了调制域这一新概念，着重分析了调制域测频方法，给出了所实现的调制域测频系统框图，展示了调制域测试的关键技术、内插技术和无间隔计数技术，介绍了游标内插法，独立提出了斜波内插法和孪生链。     

CBERS-1卫星红外多光谱扫描仪扫描子系统

文章介绍了CBERS -1卫星红外多光谱扫描仪(IRMSS)关键部件扫描子系统研制与应用情况。     

淡谈空管设备维护人才的培养

长期以来，民航空管设备维护人才队伍始终受工作性质和环境的制约，存在不专、不精的问题，往往是大家业务水平相差不大，对每一类设备，或者对一类设备中的各个部分的了解程度大都在一个层面上，一般的问题大家都能解决，而疑难杂症却鲜有人能解决，这就给空管设备的安全运行带来极大的隐患。作为一个参加工作五年的空管雷达设备机务员，笔者在这里以做机务员的经历谈谈自己对空管设备维护人才培养的想法。     

中燃速HTPB推进剂燃速公差控制

研究了复合推进剂燃速公差控制的原理和方法，评估了固体组分粒度偏差和组分称量偏差地中燃速丁羟推进剂燃速公差的影响，结果表明，粒度偏差是导致燃速波动的主要原因，称量偏差的影响可忽略不计。     

用Monte-Carlo法作Bézier曲线

本文主要内容是用Monte-Carlo法作Bézier曲线,以及Monte-Carlo法和Bézier曲线的联系。     

疲劳裂纹扩展速率试验数据的可靠性分析模型

以指定ΔＫ下的ｄａ／ｄＮ服从对数正态分布为基础，提出３种ｄａ／ｄＮ试验数据统计处理方法；依据一组４０ＣｒＮｉＭｏ材料的ＣＴ试样的试验数据处理结果，对３方法进行了分析对比。     

分集接收机鉴相算法研究与设计

从介绍分集接收机的基本工作原理入手,着重论述分集接收机中差模环的两种鉴相算法,并给出两种算法在使用FPGA实现时的资源占用情况,最后介绍了两种算法在实际工程中的应用。