行星际磁场北向分量触发磁层扰动的可能性

本文用典型事件和统计分析论证了行星际磁场北向分量触发地磁扰动的可能性.给出了行星际电场E_y分量对磁层大尺度对流电场E_M的耦合系数.从耦合方程出发讨论了磁层对太阳风作用的响应,证明磁层不是起半波整流器作用,从而表明经典的重联理论应有所修改.     

利用高空科学气球收集宇宙尘粒

本文叙述了高空科学气球上一种自行研制的宇宙尘收集器以及气球吊篮系统。利用该系统进行了五次高空字宙尘粒的收集飞行,简述了对所收集的尘粒进行系统研究的结果。     

多星测控调度的遗传算法分析

针对多星过站冲突问题,以工程需求为导引,建立了多星测控调度模型,并采用遗传算法对其进行求解.从全局和局部搜索两种策略入手,以可用可见弧段为对象,设计了"全弧段"编码和基于协同进化的编码两种编码方式,给出了对应算法的实现流程和遗传操作算子,对两种编码方式的求解效率进行了分析.通过仿真对两种编码的求解质量与时间开销性能作了验证,由此得出了两种编码和对应搜索策略的适用范围.据此开发的系统已成功应用于航天顶层设计的辅助决策.     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

Development process of muzzle flows including a gun-launched missile

Numerical investigations on the launch process of a gun-launched missile from the muzzle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme(AUSMPW+) and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail.This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the freeflight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.     

直径比对冲击气膜组合冷却流动与换热的影响

 通过数值模拟,研究了涡轮叶片弦中区所采用的新型双层腔冷却结构的冷却特性,系统分析了冲击气膜组合冷却的流动与换热特性,讨论了冷气进口雷诺数Re、吹风比M以及气膜孔与冲击孔的直径比D/d对组合冷却效果的影响。计算参数范围是：冷气进口雷诺数Re＝2 000～5 000,吹风比M＝0.6～2.0。计算结果表明, 冷气进口Re,M以及D/d对双层腔结构冷却效果的影响非常明显,在计算范围内:（1）Re和M越高,冷却效果越好;（2）当冲击孔直径一定时,增加气膜孔的直径,冷却效果会随之增加;（3）当冲击孔直径一定时,增加气膜孔的直径,流阻系数会随之减小。     

The Role of Magnetic Reconnection in CME Acceleration

Observations carried out from the coronagraphs on board space missions (LASCO/SOHO, Solar Maximum and Skylab) and ground-based facilities (HAO/Mauna Loa Observatory) show that coronal mass ejections (CMEs) can be classified into two classes based on their kinematics evolution. These two classes of CMEs are so-called fast and slow CMEs. The fast CME starts with a high initial speed that remains more or less constant; it is also called the constant-speed CME. On the other hand, the slow CME starts with a low initial speed, but shows a gradual acceleration; it is also called the accelerated and slow CME. Low and Zhang [Astrophys. J. 564, L53–L56, 2002] suggested that these two classes of CMEs could be a result of a difference in the initial topology of the magnetic fields associated with the underlying quiescent prominences. A normal prominence magnetic field topology will lead to a fast CME, while an inverse quiescent prominence results in a slow CME, because of the nature of the magnetic reconnection processes. In a recent study given by Wu et al. [Solar Phys. 225, 157–175, 2004], it was shown that an inverse quiescent prominence magnetic topology also could produce a fast CME. In this study, we perform a numerical MHD simulation for CMEs occurring in both normal and inverse quiescent prominence magnetic topology. This study demonstrates three major physical processes responsible for destabilization of these two types of prominence magnetic field topologies that can launch CMEs. These three initiation processes are identical to those used by Wu et al. [Solar Phys. 225, 157–175, 2004]. The simulations show that both fast and slow CMEs can be initiated from these two different types of magnetic topologies. However, the normal quiescent prominence magnetic topology does show the possibility for launching a reconnection island (or secondary O-line) that might be thought of as a “CME’’.     

Analysis of crack opening stresses for center- and edge-crack tension specimens

Accurate determination of crack opening stress is of central importance to fatigue crack growth analysis and life prediction based on the crack-closure model. This paper studies the crack opening behavior for center- and edge-crack tension specimens. It is found that the crack opening stress is affected by the crack tip element. By taking the crack tip element into account, a modified crack opening stress equation is given for the center-crack tension specimen. Crack surface displace- ment equations for an edge crack in a semi-infinite plate under remote uniform tension and partially distributed pressure are derived by using the weight function method. Based on these displacements, a crack opening stress equation for an edge crack in a semi-infinite plate under uniform tension has been developed. The study shows that the crack opening stress is geometry-dependent, and the weight function method provides an effective and reliable tool to deal with such geometry depen- dence.     

切削工具材料的发展综述

具体介绍切削工具材料如高速钢、硬质合金、陶瓷、金属陶瓷、刀具涂层技术、超硬材料的演变和进展。     

高性能与高功能纤维的发展

概述了用于复合材料增强体的高性能纤维和具有各种物理与化学功能用途的高功能纤维的进展现状并推测其发展趋势。