热解气体燃烧对炭化复合材料烧蚀热响应影响规律

在近空间高超声速飞行器飞行时间长、马赫数不断增加的发展趋势下，热防护与轻量化的矛盾越来越突出。基于此，开展了热解气体燃烧对炭化复合材料表面烧蚀影响的相关数值模拟研究，并与风洞试验结果进行了对比。结果表明：热解气体的燃烧可降低炭化复合材料表面的烧蚀厚度，并且随着气动热的增加，热解气体燃烧对材料表面碳的保护作用越来越明显。研究成果可为下一代近空间高超声速飞行器热防护系统的优化设计提供技术支撑。     

基于热力耦合层合板雷击损伤特性分析

为研究复合材料层合板在雷电流作用下的烧蚀损伤力学特性,建立复合材料雷击热力耦合有限元分析模型,与文献实验结果对比验证模型的有效性。根据Hashin三维失效准则编写用户材料子程序,分别得出层合板雷击烧蚀区域周围出现的力学损伤、各层力学损伤分布以及首层在不同方向上的应力分布,分析得出层合板的烧蚀损伤随雷电流持续时间的变化规律。结果表明:由于存在较高的温度梯度,导致层合板出现较大的热膨胀应力,进而导致层合板内部产生各种力学损伤,即基体开裂、分层及纤维断裂;雷击电流施加时间、峰值电流与温度场均对层合板烧蚀面积产生较大的影响。     

不同喷铝参数对复合材料雷击防护性能模拟

为了研究复合材料不同的雷击防护(lightning strike protection,LSP)系统在雷电流作用下的损伤规律,对雷击损伤过程和烧蚀机理进行分析,建立复合材料层合板雷击防护的能量平衡数学模型。在此基础上,在ABAQUS中建立复合材料基准件、全喷铝和局部喷铝防护系统的碳纤维增强复合材料(carbon fiber reinforced polymer,CFRP)层合板电-热耦合有限元模型,和实验结果对比验证模型的有效性,对雷击烧蚀损伤特征进行分析,并引入雷击烧蚀损伤指数DI,得出三种不同模型在不同铝涂层厚度、不同峰值雷电流作用下的烧蚀损伤规律,并对两种不同的局部喷铝防护系统下复合材料的损伤特征进行对比分析。结果表明:雷击防护系统下复合材料的烧蚀损伤面积和铝涂层厚度关系进行函数拟合,两者均满足幂函数关系。     

含天然与人工内部缺陷轮盘裂纹扩展特性对比分析

为达到应用人工内部缺陷获得轮盘裂纹扩展特性，开展了含天然与人工内部缺陷轮盘高速旋转低周疲劳裂纹扩展对比试验，并通过无损检测分析、断口分析研究了裂纹扩展特性的差异，提出了含人工缺陷轮盘损伤容限分析思路。无损检测更易识别人工内部缺陷的特征及其变化；人工缺陷区呈碎裂状，有大量的晶间断裂，与天然缺陷区有明显差异；非缺陷区两者无明显差异。天然与人工缺陷区的裂纹扩展速率分别为0.2-0.4μm/次、0.6-1.2μm/次，均远大于基体材料理论值；1#盘加载突变区外断口反推寿命与第二加载阶段循环数的最大误差是12%；2#盘缺陷区外断口反推寿命占总循环数的44.9%-51.9%。基于人工缺陷区定义初始裂纹，排除人工与天然缺陷差异的影响，可获得轮盘裂纹扩展特性。     

LaBr3(Ce)元件破损在线监测关键核素确定及效率校准

常用的元件破损在线监测方法受外在因素影响较大，以γ能谱中关键裂变产物核素比活度进行在线定量分析是一种可靠的元件破损监测方法。针对新型LaBr₃(Ce)元件破损监测仪，设计了元件破损模拟实验，对逸出的裂变产物采用HPGe和LaBr₃(Ce)探测器进行了对比测量。通过不同冷却时间γ能谱的核素分析，确定了¹³⁵Xe，⁸⁸Kr，¹³⁸Xe，⁸⁸Rb，¹³⁸Cs等可作为LaBr₃(Ce)元件破损γ能谱监测的关键核素。同时，制备了覆盖能量范围(250～2 400)keV，含⁶⁰Co，¹³⁷Cs，¹³³Ba；²⁴¹Am，¹⁵²Eu；¹⁰⁹Cd，⁸⁸Y，⁵⁷Co及²⁴Na的4组放射性标准溶液，在建立的效率校准系统上，校准了LaBr₃(Ce)在线监测仪的效率。在反应堆一次异常情况分析中，已校准的LaBr₃(Ce)元件破损监测仪对关键核素的现场分析结果与HPGe的取样分析结果一致，表明效率校准结果准确，校准方法可靠。     

Boundary condition modelling and identification for cantilever-like structures using natural frequencies

The actual boundary conditions of cantilever-like structures might be non-ideally clamped in engineering practice, and they can also vary with time due to damage or aging. Precise modelling of boundary conditions, in which both the boundary stiffness and the boundary mass should be modelled correctly, might be one of the most significant aspects in dynamic analysis and testing for such structures. However, only the boundary stiffness was considered in the most existing methods. In this paper, a boundary condition modelling and identification method for cantilever-like structures is proposed to precisely model both the boundary stiffness and the boundary mass using sensitivity analysis of natural frequencies. The boundary conditions of a cantilever-like structure can be parameterized by constant mass, constant rotational inertia,constant translational stiffness, and constant rotational stiffness. The relationship between natural frequencies and boundary parameters is deduced according to the vibration equation for the lateral vibration of a non-uniform beam. Then, an iterative identification formulation is established using the sensitivity analysis of natural frequencies with respect to the boundary parameters. The regularization technique is also used to solve the potential ill-posed problem in the identification procedure.Numerical simulations and experiments are performed to validate the feasibility and accuracy of the proposed method. Results show that the proposed method can be utilized to precisely model the boundary parameters of a cantilever-like structure.     

一种基于数字采样技术的电压波动测量系统CSCD

本文针对电能质量计量校准领域中电压波动参数的测量问题进行研究,通过比较现有电压波动信号的检测方法,结合数学模型分析,提出一种基于Agilent 3458A采样器的电压波动信号交流采样均方根值检测法。并搭建电压波动信号测量系统,通过实验,实现了测量电压波动频率范围可覆盖0.008Hz^40Hz,波动值范围为0.1%~30%。     

支持多核的嵌入式操作系统关键技术研究

以分析当前支持多核的操作系统需实现的关键技术为基础,从多核操作系统的引导和初始化、多核操作系统任务管理、多核中断、核间通信以及核间同步与互斥等方面具体分析、研究支持多核的嵌入式操作系统的实现机制,提出了一种多核领域操作系统关键技术的解决思路.     

Crystal orientation and morphology of α lamellae in wrought titanium alloys: On the role of microstructure evolution in β processing

To obtain high-quality aviation forgings of titanium alloys, β forging is an essential processing step which must be considered throughout a production process. In this work, the effect of β forging on the crystal orientation and morphology of lamellar α was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during β working resulted in the formation of low-angle grain boundary (LAGB_β) inside β grains. The lamellar α can penetrate through the LAGB_β, leading to similar intra α LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed. A continuous change of the β orientation in diffusive boundaries results in the formation of fine and disordered α lamellae without intra-lamellar boundary to hold the Burgers orientation relationship (OR). On sharp boundaries, it is prone to producing continuous grain boundary α (α_GB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary α for a smoother orientation change on the β grain boundary.