空间遥控作业机器人系统的内模控制研究

针对空间遥控作业机器人系统通讯时延严重破坏系统性能的问题，为力反馈遥作业系统建立了内模结构，对系统的透明性和稳定性进行分析并给出了控制器设计结果。给出的控制方法不仅能兼顾系统在时延下的稳定性和透明性，而且可以实现主从机械手速度与力的动静态跟踪，使系统具有良好的力觉临场感。借助于内模结构，以透明性为目标的控制器设计独立于稳定性来进行，降低了设计的复杂度，增强了控制的灵活性。理论分析和仿真实验证明该方法有效。     

战术导弹垂直发射系统的现状及发展趋势

介绍了垂直发射装置通用化、箱式化和模块化的总体特征。详细论述了国外现役8种类型的垂直发射系统，根据基本结构特点将垂直发射装置分为模块式结构、独立布置的分离式结构和旋转式结构，另依据发射动力将垂直发射装置分为热发射和冷发射。以热发射的同心筒式结构和冷发射采用的大倾角、模块化设计为例．分析了垂直发射装置的发展趋势。     

椭圆轨道编队常值推力构形变化控制方法

采用T-H方程作为椭圆轨道编队的动力学描述，推导了常值推力作用下的椭圆轨道编队的构形变化控制方法。通过合理的选择控制量的作用时刻，可达到大量节约燃料的目的。结合该构形控制方法给出了燃料均衡与燃料最优的解决方案；最后，给出的仿真算例说明了本文设计方法的有效性。     

受激光控制分解式固体微推力器内流动特性研究

建立了描述激光控制分解式固体微推力器内流动特性的计算模型,对激光微推力器内流动进行了数值计算,计算值与实验结果吻合较好。分析了气体粘性和压强对激光微推力器内流动特性的影响。结果表明,微推力器内流动受低压、小尺寸的综合影响,喷管喉径小于0.8 mm时,气体粘性对推力器性能影响显著增强;提高推力器内压强是减小粘性影响的一种有效手段。     

Rankine涡作用下激波变形和分叉的数值研究

数值模拟了激波和Rankine涡相互作用，重点研究了波涡相互作用引起的激波结构的变化过程。应用非结构化适应网格下的二阶精度Godunov型的PLM格式来求解Elder方程，对一平面激波与不同涡强Rankine涡相互作用下瞬态激波的运动、发展进行了研究。漩涡与激波间相对强度的大小对激波结构的影响明显，弱相互作用诱导激波变形，强相互作用诱导激波变形并产生分叉。计算结果表明，应用非结构化适应网格的PLM格式所得到的数值解较好地反映了瞬态激波结构的有关特征和信息。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

SPACE LIFE SCIENCE IN 2000-2001

Chinese scientists studied some of the problems in the field of space life science and achieved success in the area during 2000-2001. Space biological experi ments were carried out in the orbit and the results of ground studies on protein crystallization, space radiation, space motion sickness were introduced in this paper. The influences of simulated weightlessness on the brain-function, the car diovascular, endocrine hormones, immunity, skeletal and muscle systems were presented. In addition, gravity medicine and space environment medicine, as well as countermeasures to space deconditioning, such as the traditional Chinese medicine, were also reported.     

掺磷纳米硅薄膜的微结构

采用喇曼(Raman)散射谱、高分辨率电子显微镜(HRTEM)和原子力显微镜(AFM)对掺磷纳米硅薄膜的微结构进行了分析,并对纳米硅薄膜的传导机制进行了探讨.结果表明:掺磷纳米硅薄膜由尺寸为2～4*#nm的晶粒和2～3个原子层厚的非晶界面构成,计算得到薄膜的晶态比为40%～55%.与本征纳米硅薄膜相比,掺磷纳米硅薄膜晶粒尺寸和晶态比没有明显变化,电导率却提高了2个数量级.随着掺磷浓度增加,纳米硅薄膜的晶粒尺寸、晶态比及电导率逐渐增大.AFM观察表明掺磷纳米硅薄膜由尺寸介于15～20*#nm的团簇构成,团簇排列具有带状特征.