涡脱落撞击潜入式喷管引起低频压力振荡研究

通过不同障碍高和不同加质的冷流数值模拟,着重研究碰撞频率（碰撞处压力振荡频率）与强度(碰撞处p_rms/p_mean)对于SRM内压力振荡幅频特性的作用程度。研究结果表明,SRM内压力振荡幅度与碰撞处的压力振荡大小为相同量级。当碰撞强度较小时,碰撞只起到增强声场的作用;当碰撞强度较大时,碰撞产生的压力振荡随碰撞强度的增加逐渐覆盖淹没声场。SRM内压力振荡的幅频特性主要由涡脱落碰撞强度决定,一般只呈现低频且具有非声非线性特征。     

某型教练机嵌入式训练系统顶层设计技术研究

本文通过对该型教练机现有航空电子系统构型、驾驶员操作程序、接口控制文件深入研究,结合未来功能扩展需求,给出了合理的系统构型分析、功能分配、数据流规划、原相关系统软件改动分析,在此基础上还设计出了嵌入式训练系统技术方案.依据方案研制的嵌入式训练系统原理样机通过系统动态试验、航电系统地面综合试验和飞机地面通电试验,证明系统...     

A software package for computer-aided design analysis of thin-walled structures from composite materials

An algorithm of analyzing the design parameters for a thin-walled wing from composite material based on the efficient distribution of structural material between load-carrying elements is described. We consider the problems of convergence acceleration for the iteration design analysis. Also presented are the examples of determining the design parameters for a superlight aircraft wing and the rational parameters of the filler in the form of a three-dimensional rod structure.     

Water feed influence on nitric oxide emission under oxidation of near-stoichiometric air-methane mixtures

We considered the influence of temperature on the nitric oxide emission under combustion of the near-stoichiometric mixtures with and without water feed. We revealed the advantage of the method of fuel-water-air mixture combustion over that of the leaned mixture combustion.     

Determination of characteristic frequencies of elastic oscillations of the <Emphasis Type="Italic">International Space Station</Emphasis> construction

The results of investigating free oscillations of the International Space Station construction appearing during spacecraft docking and undocking are described. The study is carried out using the measurement data of the low-frequency MAMS accelerometer. Several intervals of measurements performed in 2005 and 2006 were chosen to be studied. For chosen intervals, only the data intervals corresponding to the process of free attenuation of the oscillations construction elements were analyzed. Characteristic frequencies of elastic oscillations of the station construction and attenuation coefficients corresponding to them are found. The comparative analysis of the results obtained for various docking ports (nodes) is carried out. The described study is performed as a part of the technical experiment “The ISS Environment” carried out onboard the station in accordance with the Russian program of scientific and engineering experiments.     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

Algebraic operations on graphs with using numeric coding for simulating the systems of rocket and space technology

The paper adduces the relators for algebraic operations on graphs using the numeric codes of the graphs. The special algebra of codes has been devised with consideration of the principles of graph transformation. This paper demonstrates the relevance of numeric coding of graphs for solving the problems of enumeration, systematization, and compact representation of the information about the structural and functional characteristics of the systems of flow distribution and conversion of rocket and space technology and for conducting the modeling transformations of given systems in the course of the structural and functional studies as well.     

自适应遥测信道速率的分包遥测调度方案

在卫星分包遥测静态分配适应单一遥测信道的方案基础上,提出了一种改进型动态自适应遥测信道速率的遥测分包方法,将包传输的控制参数由绝对参数优化为相对参数,从而满足不同信道速率、不同包源速率下的包传输适应性.该方法通过将遥测包周期计数与遥测包静态分配的传输周期的比值作为遥测包传输等待迫切比例系数,用相对的传输迫切比例系数值对全部遥测包进行排序,从大到小组入遥测信道下传.通过这种遥测包调度策略解决了遥测信道速率变换对包传输控制的影响.此外通过调节遥测包传输比例系数也能很好地解决遥测包数据率变化对信道传输的适应能力的影响,如数据率增加时整体降低包传输频率、数据率减少时整体加快包传输频率.     

基于模型的系统工程概述

由于航空领域涉及的系统日益高度复杂,为更好推进基于模型的系统工程(Model Based System Engineering,MBSE)研发体系,通过从当前遇到的问题、推行基于模型的系统工程的必要性、优势、未来的挑战等方面进行了较为详细地阐述.基于模型的系统工程研发体系具有知识表示的无二义、系统设计的一体化、沟通交流的高效率等优势,是未来发展的大趋势.