基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

应用联合变换相关器的成像制导系统

提出了一种光电混合的成像制导系统，它采用光学联合变换相关器作为其主要的图像识别单元，利用计算机对识别结果进行判决和显示，并发出跟踪信号给导引头，从而实现制导。联合变换相关器是对光学图像信号进行并行处理的器件，实时识别性能强，精度高。此成像制导系统克服了传统的红外制导系统易受外界因素影响，实时处理能力差，误判率较高的缺点，具有并行处理速度快、信息吞吐量大、体积小等优点，应用前景广阔。     

基于多目标进化算法的导弹鲁棒姿控系统设计研究

实际中在进行弹性导弹的姿控系统设计时,控制器参数的调试比较困难.现把弹性导弹的姿控系统设计问题转化为受限多目标优化问题,然后通过多目标进化算法(MOEA)NSGA-Ⅱ进行求解.通过在某特征点的控制器设计实例表明,该设计方法使用灵活,在最后计算所得的非劣最优解集中能够得到满意的控制器参数.     

吸热碳氢燃料热沉测量实验装置的设计与性能测试

为了测定吸热碳氢燃料在不同温度条件下的总吸热量(热沉),以便于对吸热碳氢燃料进行筛选,研制了一套适合于高温下热沉测量的实验装置。该装置主要由进样计量、载气输送、加热控温、反应量热和产物分析五部分组成。对反应管轴向温度分布进行了测定,实验装置的工作温度范围在500℃-900℃,各温度下恒温区域长达440 mm,恒温区内温度梯度不大于3℃;利用电能标定的方法测定了装置的量热常数,并用纯物质(N2)作为样品对装置的准确度进行了校准,求解仪器量热常数的工作曲线的线性相关系数在0.999 7以上,氮气热沉测定值与理论值基本吻合,表明该装置测定结果可靠、测量准确度高,装置的设计符合T ian’s方程,可用于吸热碳氢燃料热沉的实验测定,为吸热碳氢燃料的研究提供了较可靠的热化学数据。     

声重波激发的赤道Spread—F的拓扑特性研究

本文对声重波激发的Spread-F扰动的非线性制约方程的拓扑特性进行了定性讨论和数值计算．研究了Spread-F的混沌特征及参数范围．结果表明声重波在不同条件时对Spread-F的激发作用有本质的不同．     

"神舟二号"大气密度探测器的探测结果Ⅱ.在太阳和地磁扰动期间高层大气密度的变化

选用了Sz—2大气密度探测器在2001年2—4月间的探测数据,进行日照和阴影区域热层大气密度对太阳和地磁活动程度的响应变化的探讨．结果表明,日照区大气密度峰值主要随F10.7值而变,在地磁扰动期间,阴影区大气密度对扰动的响应更明显,通常响应变化开始于高纬度地区,然后向低纬度地区推移．     

SOME RESULTS OF UPPER ATMOSPHERIC COMPOSITION MEASUREMENTS BY A MASS-SPECTROMETER ON BOARD "SZ-2":CHANGE OF COMPOSITIONS DURING SOLAR AND GEOMAGNETIC DISTURBANCES

Upper atmosphere composition data were obtained for the last half year with a quadruple mass spectrometer on board spacecraft "SZ-2" launched on 10 Jan uary 2001. Based on the analysis of these data, the variations of atmospheric compositions in solar and geomagnetic quiet conditions are reported first, then a detailed discussion on the atmospheric composition variations under the so lar and geomagnetic disturbed conditions is given. The results show that near the altitude of 400 km the variations of main atmospheric compositions corre sponding to solar disturbances are more remarkable in the sunlit area than in the shade area. On the contrary, in geomagnetic disturbance events the corre sponding variations are more obvious in the shade area, an evident increase of N2 density at relatively higher latitudes was observed.     

扭叶片型面在线检测的研究

以汽轮机700mm扭叶片为对象,在XK5040数控机床上,进行了型面误差在线检测的研究。     

齿轮测量中心测头数据采集系统

提出了齿轮测量中心电感测头的新型数据采集系统,包括以集成开关构成的新型相敏检波器和以单片机为核心的数据采集系统,可以应用于各种电感信号的处理,具有较强的通用性。