Senrad: an advanced wideband air-surveillance radar

The generic characteristics and performance of an experimental long-range air-surveillance radar, known at the Naval Research Laboratory as Senrad, is described. Its distinguishing feature is that it can operate with simultaneous transmissions over a very wide bandwidth-from 850 to 1400 MHz. The technology and type of experimental radar equipment employed are discussed and examples are given of its performance capabilities obtained by means of very wideband operation. The unusually wide bandwidth of this radar allows 1) improved detection and tracking performance because of the absence of the nulls that are common in the antenna elevation radiation-pattern of a single-frequency radar; 2) moving target indication (MTI) without loss of targets due to blind speeds and without the need for multiple PRFs (pulse repetition frequencies); 3) accurate height finding with a fan-beam radar by taking advantage of the multipath time difference as a function of target height; 4) a form of limited target recognition based on high range-resolution; and 5) a reduction of the effectiveness of electronic countermeasures that can seriously degrade more narrowband radars     

Extracting multiple frequencies from phase-only data

The problem of extracting multiple frequencies from phase-only data is addressed. Multiple frequency estimation is accomplished by reconstructing the Fourier transform of the complex-valued time signal and then finding peaks in the frequency domain. We present a set of conditions under which a discrete-time complex sequence can be completely specified by its phase-only information. Two candidate multiple frequency estimation schemes are introduced, one based on a closed-form least-squares inverse, the other an iterative reconstruction algorithm. The uniqueness of the closed-form solution and the convergence of the iterative scheme have been proven under certain conditions. Several examples are given, including the case where the phase is quantized as would happen in an analog-to-digital (A/D) converter. Extensions to the multidimensional case, and to the case of real-part only reconstruction are straightforward.     

Electric currents induced inside biological cells by geomagnetic and atmospheric phenomena.

An increasing number of studies have appeared in the last ten years indicating that some pathologies may correlate with geomagnetic activity and cosmic rays. However a physical mechanism binding both phenomena has not been proposed. In the present work we obtain the amplitude of the magnetic fields at different frequencies, that may induce inside biological cells currents of the same magnitude of the currents generated by the cells themselves. We compare these values with the wave amplitudes produced in geomagnetic and atmospheric phenomena, and found that micropulsations, whistlers and lightning are capable of produce the same or larger values.     

Steady-state analysis and design of a switched-capacitor DC-DCconverter

A representative switched-capacitor DC-DC converter topology is presented, circuit operation is explained, and control strategies are identified. State-space averaging is used to analyze steady-state performance and to develop control criteria and design equations. The analytical results are verified by SPICE simulation     

The Freja ultraviolet imager

Auroral images acquired by satellite instrumentation have proven to be a crucial component of the scientific equiry into the physical processes of the Earth's magnetosphere. TheFreja mission provided an opportunity to extend these measurements into the temporal and spatial regime commonly associated with ground-based optical imagers. Employing the basic procedure used successfully in theViking program allowed image repetition rates of 6 s to be achieved with simultaneous exposure of all pixels within the field-of-view. Typical exposure times of 0.3 s required development of an improved image intensifier system and operational requirements resulted in image formats covering approximately one-third of a spin. Simultaneously exposing two broad-band UV cameras, the instrument generates in its normal operational mode 264.6 kbytes per image pair. Results from initial operations confirm the design approach and suggest such imagers can be routinely included on challenging low cost missions such asFreja.     

A SAR processor based on two-dimensional FFT codes

A synthetic aperture radar (SAR) processor approach based on two-dimensional fast Fourier transform (FFT) codes coupled with an asymptotic evaluation of the unit response function is presented. For the latter, no approximation is made to the distance function, so that the full range of geometric aberrations is analytically considered, enabling an effective reference filter to be designed. The two-dimensional FFTs were designed as to run on computers of very limited memory: the required FFT is computed by means of FFTs of lower order. Two FFT codes were considered: one is faster and allows full or reduced (quick look or multilook) resolution performance to be obtained easily; the second is slower but allows the use of a space-varying filter and/or investigations on limited portions (zoom) of the image. Both codes are suited to parallel processing, e.g. by a transputer net. A full discussion on computer memory and time requirements is presented as well as first examples of image processing results     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

Century scale solar variability imprinted in the 44Ti activity in meteorites.

The measurements of gamma-activity of the 44Ti (T1/2 = 66.6 years) produced by spallation reaction of galactic cosmic rays (GCR) in Alfianello, Olivenza, Rio Negro, Dhajala and Torino meteorites, which fell in the time interval 1883 AD (Alfianello)-1988 AD (Torino), show a century scale modulation, connected to long-term solar-wind flux variations in the interplanetary space. The variation of the 44Ti activity with the time of fall of meteorites is qualitatively consistent with the Gleissberg solar cycle, but the amplitude is three-four times higher than expected (about 5%) for GCR flux modulated by solar activity, as determined solely by the sunspot number. The cosmogenic 44Ti is a suitable radioisotope for this investigation, but its activity in meteorites is very low. We performed these measurements in the underground low level counting station of Monte dei Cappuccini in Torino, by means of a big hyperpure Ge crystal (approximately 2 kg) in selective coincidence with a heavy NaI (T1) scintillation detector (approximately 28 kg). This system allows a reliable and non destructive measurement of 44Ti (44Sc) in meteorites of 200-1200 g in weight. The background is about 1 count per day in the gamma-peak at 1157 keV of 44Sc in equilibrium with its parent 44Ti. The high stability of the performance allows long-lasting runs (approximately 10(7) s) in order to attain results with a standard deviation up to about 10%.     

Injuries to plants from controlled environment contaminants.

The use of controlled environments is subject to problems from contaminants emitted from materials of the system and from plants. Many contaminants are difficult to identify because injurious dosages are very low, there is a lack of information on what compounds injure plants, because species and cultivars differ greatly in their sensitivity to injury and injury symptoms often are not distinctive. Plastics have been shown to emit many different volatile compounds. The compound, di-butyl phthalate, contained in certain flexible plastics, has been shown to be very toxic to plants. Other injuries have been produced by caulking compounds and bonded screening. Paints have been shown to release xylene that is toxic to plants. Steam for humidification can cause problems because of hydroxylamines and other compounds added to steam used for heating to control fungal growth in return lines. Mercury, from broken thermometers is a particular problem in growth chambers because small quantities can collect in cracks and slowly volatilize to slow growth of plants. Plants themselves release large quantities of volatile hydrocarbons, with ethylene being the commonly recognized chemical that can be damaging when allowed to accumulate. People release large quantities of carbon dioxide which can cause variations in the rate of growth of plants. Contaminant problems can be controlled through filtering of the air or ventilation with make-up air, however the potential for problems is always present and careful testing should be undertaken with the particular species and cultivars being grown insure that there are no toxic agents altering growth in each particular controlled environment being utilized.