Charge exchange lifetimes for ring current ions

In applying the charge exchange mechanism to ion phenomena within the Earth's magnetosphere it is critical to the proper interpretation of observations that the charge exchange lifetimes for the ions be known as accurately as possible. Various new results have been published which significantly modify the charge exchange lifetimes which have been used in space physics research during the past decade and a half. Some of the newer results have been used in the application of the charge exchange decay mechanism but the use has been limited and for the most part incomplete. The neutral hydrogen density distribution now yields lifetimes which are shorter than previously calculated, while the functional dependence of the lifetimes on pitch angle provides for slower decay for ions mirroring off the geomagnetic equator. This review coalesces and summarizes the latest and best measurements of the physical quantities involved in the complete calculation of the charge exchange lifetime of the mirroring magnetospheric ions.     

Some early results of the keV plasma experiment on GEOS-1

Some preliminary new results are presented of the keV plasma experiment on GEOS-1. Electrons and ions have been observed to stream along the magnetic field lines in the dayside magnetosphere from the ionospheric side of the satellite towards the equatorial plane during magnetic storms, with streaming velocities corresponding to a kinetic energy of the order of a keV. The opposite streaming velocity has also been seen, but primarily in the ions only and with a smaller flux ratio for the two opposite directions along the field lines. The transition between the two opposite streaming directions, as seen by the satellite, has been found to occur even in a fraction of a second.In magnetic storm conditions azimuthal asymmetries in ion fluxes corresponding to electric field intensities of several tens of millivolts per meter have been observed.     

An Upper Bound on Detection Probability for Fluctuating Signals

In the theory of signal detectability, the signal-to-noise ratio (SNR), defined as the quotient of the average received signal energy and the spectral density of the white Gaussian noise, is a fundamental parameter. For a signal which is exactly known, or known except for a random phase, this ratio uniquely defines the detection performance which can be achieved with a matched filter receiver. However, when the signal amplitude is a random parameter, the detection performance is changed and must be determined from the probability density function (pdf) of the amplitude. Relative to the case of a constant signal amplitude, such signal amplitude fluctuation usually degrades performance when a high probability of detection (Pd) is required, but improves performance at low values of Pd; the corresponding change in the required SNR is the so-called signal fluctuation loss Lf. Thus, since Lf in some cases represents an improvement in performance for low values of Pd, a question of at least theoretical interest is: how large might this improvement be, when the class of all signal amplitude pdf's is considered. The solution, presented here, results in a lower bound on the signal fluctuation loss Lf as a function of Pd, or equivalently an upper bound on Pd as a function of SNR. The corresponding most favorable pdf was determined using the Lagrange multiplier technique and results of a numerical maximization are included to provide insight into the general properties of the solution.     

A Unified Approach to Model-Reference Adaptive Systems Part I: Theory

A unified approach to model-reference adaptive control systems is presented. A linearized error equation for each adaptive system is derived about some operating point and converted into the standard form for plotting root loci. The contribution made here is to convert the selection of an adaptive technique and the choosing of adaptive coefficients for some desired system performance from a "mystical art" to standard control techniquess.     

On-Line Computer for Transient Turbine Cascade Instrumentation

A 32-channel computer based data acquisition and processing system em has been developed for use with the new type of transient cascade facility at Oxford. This is used for testing turbine blades and nozzle guide vanes at full-scale engine Reynolds and Mach numbers ers with correct wallto-flow temperature ratios. A novel technique for processing transient heat transfer data from thin film surface resistance thermometers has been developed. Measurements of surface ace pressure around blades, and of the upstream turbulence level have been made. The cascade and instrumentation are shown to have advantages both in cost and effectiveness over continuous running cascades.     

Recursive Computation of the Generalized Q Function

A recursive method of computing values of the generalized Q function is described. The Q function is also interpreted in terms of noncentral chi-square distributed random variables, and in terms of the difference between Poisson random variables.     

Study of physiological effects of weightlessness and artificial gravity in the flight of the biosatellite Cosmos-936.

In the 18.5-day flight of the Soviet biosatellite Cosmos-936 (3-22, August 1977) com-parative investigations of the physiological effects of prolonged weightlessness (20 rats) and artificial gravity of 1 g (10 rats) were carried out. Throughout the flight artificial gravity was generated by means of animal rotation in two centrifuges with a radius of 320mm. Postflight examination of animals and treatment of the flight data were performed by Soviet scientists in collaboration with the specialists from Bulgaria, Czechoslovakia, the German Democratic Republic, Hungary, Poland, Rumania, France and the U.S.A. During the flight the total motor activity of the weightless rats was higher and their body temperature was lower than those of the centrifuged animals. Postflight examination of the weightless rats showed a greater percentage of errors during maze an increase in water intake and a decrease in diuresis; a fall of the resistance of peripheral red cells; an increase in the conditionally pathogenic microflora in the mouth; a decrease of oxygen consumption, carbon dioxide production and energy expenditures; a drop in the static physical endurance; a decline in the capacity to keep balance on the rail; an increase in the latent period of the lifting reflex, etc. The centrifugal animals displayed lesser or no change of the above type. These findings together with the biochemical and morphological data give evidence that during and after flight adaptive processes in the centrifuged rats developed better.     

Use of pallet-type structures in Shuttle-attached and free-flying modes

Modular pallet-type structures, designed for optimal usage of the Space Shuttle as a launch vehicle, can be used in three mission modes—Shuttle-attached, attached to an orbiting Power Module, or as fully autonomous free flyers. The requirements for such structures are defined and three structural solutions—the Spacelab pallet, a cubic framework structure and a honeycomb panel structure—are described. System and subsystem concepts of varying complexity and autonomy are indicated and their applications to several typical payload examples are shown.     

Radioisotope-powered free-piston Stirling engine for space applications

The paper presents a preliminary conceptual design of a 2kW(e) autonomous power system consisting of a radioisotopic heat source, free-piston Stirling engine, reciprocating induction generator and a space radiator. The proposed design features a direct thermal interfacing of the Pu-238 heat source with the Stirling engine head, low heat losses during normal operation, and provides an auxiliary/emergency cooling system in the case of the engine failure of stopping. The Stirling engine is of the free-displacer, free-piston type invented by Beale and uses helium as the working fluid. The engine piston is integrated with the armature of a simple linear alternator which is used for electric generation. Waste heat is rejected by a four-finned space radiator sized for a geosynchronous orbit. Specific power and efficiency of the Stirling isotope power system are compared with the present and predicted performance of other power conversion systems suitable for the same power range.     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.