Surface, Subsurface and Atmosphere Exchanges on the Satellites of the Outer Solar System

The surface morphology of icy moons is affected by several processes implicating exchanges between their subsurfaces and atmospheres (if any). The possible exchange of material between the subsurface and the surface is mainly determined by the mechanical properties of the lithosphere, which isolates the deep, warm and ductile ice material from the cold surface conditions. Exchanges through this layer occur only if it is sufficiently thin and/or if it is fractured owing to tectonic stresses, melt intrusion or impact cratering. If such conditions are met, cryomagma can be released, erupting fresh volatile-rich materials onto the surface. For a very few icy moons (Titan, Triton, Enceladus), the emission of gas associated with cryovolcanic activity is sufficiently large to generate an atmosphere, either long-lived or transient. For those moons, atmosphere-driven processes such as cryovolcanic plume deposition, phase transitions of condensable materials and wind interactions continuously re-shape their surfaces, and are able to transport cryovolcanically generated materials on a global scale. In this chapter, we discuss the physics of these different exchange processes and how they affect the evolution of the satellites’ surfaces.     

行星际磁场与磁尾磁通量绳形成的关系

收集了Cluster卫星在2001-2005年间观测到的磁尾磁通量绳事件,并对磁通量绳(magnetic flux rope)形成及其内部磁场结构与行星际磁场(IMF)的关系作了统计研究.考虑磁通量绳被观测到时行星际磁场的条件,在所有73个磁通量绳事件中,行星际磁场By分量占有主导地位的事件有80%,且78%的事件具有与行星际磁场By分量相同方向的核心场.行星际磁场通过在磁层顶与地球磁场相互作用改变南北等离子体片内磁场相对方向,形成有利于磁通量绳形成的磁场位形,并且行星际磁场By分量的方向对磁通量绳内部核心场的方向具有决定性影响.从统计结果来看,磁通量绳的形成并不会依赖于行星际磁场Bz分量的方向.     

A detailed FLUKA-2005 Monte-Carlo simulation for the ATIC detector

We have performed a detailed Monte-Carlo (MC) simulation for the Advanced Thin Ionization Calorimeter (ATIC) detector using the MC code FLUKA-2005 which is capable of simulating particles up to 10 PeV. The ATIC detector has completed two successful balloon flights from McMurdo, Antarctica lasting a total of more than 35 days. ATIC is designed as a multiple, long duration balloon flight, investigation of the cosmic ray spectra from below 50 GeV to near 100 TeV total energy; using a fully active Bismuth Germanate (BGO) calorimeter. It is equipped with a large mosaic of silicon detector pixels capable of charge identification, and, for particle tracking, three projective layers of x–y scintillator hodoscopes, located above, in the middle and below a 0.75 nuclear interaction length graphite target. Our simulations are part of an analysis package of both nuclear (A) and energy dependences for different nuclei interacting in the ATIC detector. The MC simulates the response of different components of the detector such as the Si-matrix, the scintillator hodoscopes and the BGO calorimeter to various nuclei. We present comparisons of the FLUKA-2005 MC calculations with GEANT calculations and with the ATIC CERN data.     

The Ultraviolet Spectrograph on NASA’s Juno Mission

The ultraviolet spectrograph instrument on the Juno mission (Juno-UVS) is a long-slit imaging spectrograph designed to observe and characterize Jupiter’s far-ultraviolet (FUV) auroral emissions. These observations will be coordinated and correlated with those from Juno’s other remote sensing instruments and used to place in situ measurements made by Juno’s particles and fields instruments into a global context, relating the local data with events occurring in more distant regions of Jupiter’s magnetosphere. Juno-UVS is based on a series of imaging FUV spectrographs currently in flight—the two Alice instruments on the Rosetta and New Horizons missions, and the Lyman Alpha Mapping Project on the Lunar Reconnaissance Orbiter mission. However, Juno-UVS has several important modifications, including (1) a scan mirror (for targeting specific auroral features), (2) extensive shielding (for mitigation of electronics and data quality degradation by energetic particles), and (3) a cross delay line microchannel plate detector (for both faster photon counting and improved spatial resolution). This paper describes the science objectives, design, and initial performance of the Juno-UVS.     

Studying the change in characteristics of optical surfaces of a spacecraft

The change in the working characteristics of the optical element sample depending on the thickness of the contamination film applied to the sample has been estimated experimentally. As sources of contamination, the coatings of lens hoods were chosen, which are located in close proximity to the contamination- sensitive optical system of a spacecraft. A series of experiments for applying contamination films of different thickness to the sample of the optical element has been carried out. Based on preliminary estimations, the thickness of the contamination during the entire period of the active existence of the spacecraft will not exceed 3500 Å.     

Temperature effects in the ATIC BGO calorimeter

The Advanced Thin Ionization Calorimeter (ATIC) Balloon Experiment had a successful test flight and a science flight in 2000–01 and 2002–03 and an unsuccessful launch in 2005–06 from McMurdo, Antarctica, returning 16 and 19 days of flight data. ATIC is designed to measure the spectra of cosmic rays (protons to iron). The instrument is composed of a Silicon matrix detector followed by a carbon target interleaved with scintillator tracking layers and a segmented BGO calorimeter composed of 320 individual crystals totaling 18 radiation lengths to determine the particle energy. BGO (Bismuth Germanate) is an inorganic scintillation crystal and its light output depends not only on the energy deposited by particles but also on the temperature of the crystal. The temperature of balloon instruments during flight is not constant due to sun angle variations as well as differences in albedo from the ground. The change in output for a given energy deposit in the crystals in response to temperature variations was determined.     

Enhancing the ATIC charge resolution

The Advanced Thin Ionization Calorimeter (ATIC) experiment is designed to investigate the charge composition and energy spectra of primary cosmic rays over the energy range from about 10¹¹ to 10¹⁴ eV during Long Duration Balloon (LDB) flights from McMurdo, Antarctica. Currently, analysis from the ATIC-1 test flight and ATIC-2 science flight is underway and preparation for a second science flight is in progress. Charge identification of the incident cosmic ray is accomplished, primarily, by a pixilated Silicon Matrix detector located at the very top of the instrument. While it has been shown that the Silicon Matrix detector provides good charge identification even in the presence of electromagnetic shower backscatter from the calorimeter, the detector only measures the charge once. In this paper, we examine use of the top scintillator hodoscope detector to provide a second measure of the cosmic ray charge and, thus, improve the ATIC charge identification.     

Energetic particle observations at high heliographic latitudes

Energetic particles, accelerated in shocks which were associated with recurrent fast solar wind streams, were observed in high heliographic latitudes; fifteen such steams were included in the present study. Intensity variations ranged up to four orders of magnitude. Energy spectra were typically steeper near forward shocks than near reverse shocks. Electrons were observed only lated to the reverse shocks. Composition ratios in accelerated streams resembled those observed in fast CIR's. In periods between the recurrent acceleration regions elemental abundance ratios were similar to those of the anomalous cosmic rays (ACR). The intensity of the accelerated particles declined as the latitude of ULYSSES increased, probably due to the weakening of the shocks.     

THE CLUSTER SCIENCE DATA SYSTEM (CSDS) – A NEW APPROACH TO THE DISTRIBUTION OF SCIENTIFIC DATA

Cluster is an ESA/NASA four-spacecraft mission designed to study plasma processes in three dimensions using the combined data from eleven instruments on each spacecraft. This mission requires the combination of many measured parameters, and the Cluster community have taken the unprecedented step of establishing a set of high quality data products from all instruments at spin (~ 4 s) resolution which will be produced and distributed throughout the mission lifetime. The Cluster Science Data System (CSDS) is based on a set of eight data centres which are implemented and funded through national programmes. As part of CSDS, a Joint Science Operations Centre (JSOC) has been established to facilitate the commanding of the 44 instruments. It is co-located with the UK data centre at the Rutherford Appleton Laboratory (RAL), Didcot, United Kingdom. ESA's contribution to CSDS includes the provision of the CSDS User Interface, a dedicated network (CSDSnet) to interconnect the data centres, and the co-ordination of all activities at CSDS level. A wide scientific community wishing to use Cluster data will have differing data rights, experience and means of access. Users will also include those working with data sets from other missions, e.g., Soho, Geotail, Wind, Polar, Interball, and Equator-S. The Cluster Science Data System is primarily designed to support multi-instrument and multi-spacecraft data analysis and it is distributed across six national data centres in Europe, one in the USA, and one in China. CSDSnet will be used to interconnect the European data centres, the Joint Science Operations Centre at Didcot and the spacecraft Operations Control Centre at ESOC in Darmstadt.