Time Sequence Change-Point Model of Electrostatic State Parameters of Aircraft Engine

Electrostatic monitoring technology of particle charging information can facilitate online monitoring of aero-engine,which effectively enhances engine fault diagnosis and health managements.Unlike traditional engine state monitoring technologies,aircraft engine monitoring by gas path electrostatic monitoring not only covers the predicted information source itself,but also detects the information that can provide an early warnings for initial fault states through gas path charging levels.This paper establishes a non-stationary time sequence change-point model for anomaly recognition of electrostatic signals based on change-point theory combined with difference method of non-stationary time series.Finally,electrostatic induction data were utilized by the engine life test for a particular aircraft to validate the proposed algorithm.The results indicate that the activity level and the event rate were0.5—0.8(nc)and 50%,respectively,which were far greater than 4—12(pc)and 0—4% under normal working conditions of the engine.     

Aerodynamic Performance and Aeroacoustic Characteristics of Model Rotor with Anhedral Blade Tip in Hover

Experimental investigation on the aerodynamic performance and aeroacoustic characteristics of model rotors with different tip anhedral angles in hover are conducted in the paper.Three sets of model rotors with blade-tip anhedral angle 0°(reference rotor),20°and 45°respectively are designed to analyze the influence of the anhedral angle on the hovering performance and aeroacoustics of rotor.In the environment of anechoic chamber,the hover experiments under the different collective pitch and blade numbers,are carried out to measure the figure of merit(FM),time history of sound pressure and sound pressure level(SPL)of the three rotor models.Based on test results,the comparison and analysis of hovering performance and aeroacoustic characteristics among the three rotor models have been done.Meanwhile,for the sake of analysis,the rotor wake and blade pressure distribution are simulated by means of computational fluid method(CFD).At last,some conclusions about the effects of blade-tip anhedral angle on the aerodynamic performance and aeroacoustic characteristics in hover are obtained.An anhedral blade tip can enhance the FM of the rotor,and decrease the rotor loads noise to some extent.     

海洋环境下载人航天器电子设备防护技术

海南文昌发射场高温、高湿、高盐雾的气候条件以及由天津到海南长距离的海上运输给航天器电子设备的三防性能带来了挑战。文章首先对运输过程中高湿、盐雾和霉菌对航天器电子设备的影响进行了分析,然后对航天器电子设备的三防工艺及运输技术进行了研究,并提出了具有普遍适用性的三防措施,能够有效降低环境因素带来的不利影响。     

提高航天器结构试验验证效费比的策略

面临市场竞争所带来的经费、周期、人力等压力,如何提高航天器结构试验验证的效费比成为热点问题。文章指出提高试验验证效费比的前提是要充分理解试验的目的、类型、责任,把试验验证视为设计与产品质量保证的有效手段;进一步提出从提高设计质量、权衡过程控制与检验试验的成本、理解失效模式、设计针对性的验证、同步规划设计与验证6方面构建高效费比的试验验证策略。     

基于准三维冰形算法的结冰预测技术及应用研究

机翼结冰是威胁民用飞机飞行安全的主要因素之一,准确预测机翼的结冰过程和特点,可为防除冰设计提供依据和支撑。提出了利用二维模拟三维的准三维冰形算法,该算法在保证结冰预测精度的同时,极大地降低了型号结冰计算成本;给出了顺气流和垂直于前缘两种典型民用飞机后掠翼机翼的二维剖面截取方法,并将采用该方法的计算结果与三维后掠机翼的结冰预测结果进行了对比分析。结果表明,相对于顺气流方式,垂直于前缘方式的准三维冰形算法与三维后掠机翼的结果更为接近。     

缺陷对高温合金蜂窝板弯曲力学性能的影响

采用预埋缺陷的方法,制备含有面芯脱焊缺陷的高温合金蜂窝板,进行了三点弯曲试验,研究了缺陷形状、大小、位置和蜂窝芯取向对蜂窝板三点弯曲损伤模式和承载能力的影响.研究发现,含面芯脱焊缺陷的蜂窝板在缺陷受压部位产生反向鼓包,并沿着宽度方向扩展为完全破坏;随着缺陷尺寸的增大,蜂窝板承载能力逐渐降低;当缺陷位于三点弯曲受拉面时,蜂窝板具有更高的三点弯曲极限载荷,且矩形缺陷试样的弯曲极限载荷要高于相同缺陷面积的圆形试样.最后,利用LS-DYNA对含圆形缺陷高温合金蜂窝板的三点弯曲性能进行了数值模拟分析,得到其三点弯曲过程中的应力分布状态.     

一种有源高带外抑制导航天线设计

设计了一种有源高带外抑制导航天线,能够有效抑制弹上数据链天线的高功率干扰,适应弹上复杂电磁环境。     

基于灰色近似支持向量机的加速度计参数预测

温度、振动等环境载荷使得石英挠性加速度计参数产生漂移,直接影响了惯导系统的测量精度和性能,石英挠性加速度计参数变化趋势为非线性的,很难用常规的建模方法进行趋势预测。基于灰色理论适合进行小样本、贫信息不确定型系统建模以及近似支持向量机不需要求解二次规划就能求得非线性模型参数的优点,提出了基于灰色近似支持向量机进行石英挠性加速度计参数预测的方法。为了验证该方法的有效性,针对自然贮存的加速度计进行了固定周期的参数标定,结果表明灰色近似支持向量机具有很好的预测效果。     

一种新型双线极化BD2 B3抗干扰天线设计

设计了一种双线极化BD2B3抗干扰天线单元,采用2个幅度相等相位相差90°的馈电点,产生幅度相等相位正交的2个线极化波实现双线极化,用该天线单元进行抗干扰阵列组合,能够有效减小天线阵列的体积。     

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.