Ti2AlC/TiB2/TiC复相陶瓷的制备及性能研究

采用SHS法合成了Ti_2Al C、TiB_2、TiC三相复合陶瓷粉体;应用SPS技术制备了Ti_2AlC/TiB_2/TiC块体复相陶瓷材料;采用XRD、SEM和EDS等手段对复相材料的相组成、微观形貌进行了分析。研究结果表明:在所制备的复相块体陶瓷中,Ti2Al C为基体相,TiB_2和TiC弥散分布于基体相中;复相块体陶瓷具有高的致密度,为99.6%;显微硬度平均为12.96 GPa;断裂韧性为45.28 MPa·m~(1/2),这为下一步研究其可加工性提供了实验依据。     

SOI工艺抗辐照SRAM型FPGA设计与实现

为提升SRAM型FPGA电路块存储器和配置存储器抗单粒子翻转性能，本文提出一种脉冲屏蔽SRAM单元结构。该结构通过在标准的六管单元中加入延迟结构,增大单元对单粒子事件响应时间，实现对粒子入射产生的脉冲电流屏蔽作用。以64k SRAM作为验证电路进行单粒子翻转性能对比，电路的抗单粒子翻转阈值由采用标准六管单元的抗单粒子翻转阈值大于25 MeV·cm 2·mg -1 提升至大于45 MeV·cm 2·mg -1 ，加固单元面积较标准六管单元增大约21.3%。30万门级抗辐照FPGA电路通过脉冲屏蔽单元结合抗辐照SOI工艺实现，其抗辐照指标分别为：抗单粒子翻转阈值大于37.3 MeV·cm 2·mg -1 ，抗单粒子锁定阈值大于99.8 MeV·cm 2·mg -1 ，抗电离总剂量能力大于200 krad(Si)。     

GNSS global real-time augmentation positioning: Real-time precise satellite clock estimation,prototype system construction and performance analysis

Lots of ambiguities in un-differenced (UD) model lead to lower calculation efficiency, which isn’t appropriate for the high-frequency real-time GNSS clock estimation, like 1 Hz. Mixed differenced model fusing UD pseudo-range and epoch-differenced (ED) phase observations has been introduced into real-time clock estimation. In this contribution, we extend the mixed differenced model for realizing multi-GNSS real-time clock high-frequency updating and a rigorous comparison and analysis on same conditions are performed to achieve the best real-time clock estimation performance taking the efficiency, accuracy, consistency and reliability into consideration. Based on the multi-GNSS real-time data streams provided by multi-GNSS Experiment (MGEX) and Wuhan University, GPS + BeiDou + Galileo global real-time augmentation positioning prototype system is designed and constructed, including real-time precise orbit determination, real-time precise clock estimation, real-time Precise Point Positioning (RT-PPP) and real-time Standard Point Positioning (RT-SPP). The statistical analysis of the 6 h-predicted real-time orbits shows that the root mean square (RMS) in radial direction is about 1–5 cm for GPS, Beidou MEO and Galileo satellites and about 10 cm for Beidou GEO and IGSO satellites. Using the mixed differenced estimation model, the prototype system can realize high-efficient real-time satellite absolute clock estimation with no constant clock-bias and can be used for high-frequency augmentation message updating (such as 1 Hz). The real-time augmentation message signal-in-space ranging error (SISRE), a comprehensive accuracy of orbit and clock and effecting the users’ actual positioning performance, is introduced to evaluate and analyze the performance of GPS + BeiDou + Galileo global real-time augmentation positioning system. The statistical analysis of real-time augmentation message SISRE is about 4–7 cm for GPS, whlile 10 cm for Beidou IGSO/MEO, Galileo and about 30 cm for BeiDou GEO satellites. The real-time positioning results prove that the GPS + BeiDou + Galileo RT-PPP comparing to GPS-only can effectively accelerate convergence time by about 60%, improve the positioning accuracy by about 30% and obtain averaged RMS 4 cm in horizontal and 6 cm in vertical; additionally RT-SPP accuracy in the prototype system can realize positioning accuracy with about averaged RMS 1 m in horizontal and 1.5–2 m in vertical, which are improved by 60% and 70% to SPP based on broadcast ephemeris, respectively.     

Effect of blade sweep on inlet flow in axial compressor cascades

This paper presents comparative numerical studies to investigate the effects of blade sweep on inlet flow in axial compressor cascades. A series of swept and straight cascades was modeled in order to obtain a general understanding of the inlet flow field that is induced by sweep.A computational fluid dynamics(CFD) package was used to simulate the cascades and obtain the required three-dimensional(3D) flow parameters. A circumferentially averaged method was introduced which provided the circumferential fluctuation(CF) terms in the momentum equation.A program for data reduction was conducted to obtain a circumferentially averaged flow field.The influences of the inlet flow fields of the cascades were studied and spanwise distributions of each term in the momentum equation were analyzed. The results indicate that blade sweep does affect inlet radial equilibrium. The characteristic of radial fluid transfer is changed and thus influencing the axial velocity distributions. The inlet flow field varies mainly due to the combined effect of the radial pressure gradient and the CF component. The axial velocity varies consistently with the incidence variation induced by the sweep, as observed in the previous literature. In addition, factors that might influence the radial equilibrium such as blade camber angles, solidity and the effect of the distance from the leading edge are also taken into consideration and comparatively analyzed.     

可控肥皂膜气柱界面与激波相互作用的实验研究

基于肥皂膜技术提出了一种生成气柱界面的简单方法。形成的界面不需要支撑网格,因此初始条件可以很好地控制。在水平激波管中结合高速纹影开展了平面激波与二维或三维气柱界面作用的实验。纹影照片显示实验结果杂波更少,演变中的界面也比文献的结果更对称。此外,还特别研究了由极小曲面特征导致的三维效应,发现三维效应使界面的演变和发展变慢了。本研究将有助于更多了解三维性对Richtmyer-Meshkov不稳定性发展的影响。     

基于灰色模型的我国铁矿石需求量预测分析

采用将进口量和需求量挂钩来预测铁矿石需求量,摒弃了原有的与粗钢挂钩的预测原则。对我国铁矿石需求量采用灰色预测模型来预测,得出2017年我国铁矿石需求量为21亿吨左右,并指出我国铁矿石需求增长的趋势短期内是难以扭转的。     

基于解析法的用户差分距离误差解算方法(英文)

为了进一步增强星基导航系统的完好性性能,提出了一种基于解析法的用户差分距离误差计算方法。文中首先介绍了卫星时钟和星历改正数的计算方法,认为计算用户差分距离误差的关键是查找卫星服务区域内的最差用户位置。通过变换卫星时钟和星历误差协方差矩阵,将查找最差用户位置变换成一个解析几何问题,通过数学推导得出最差用户位置的解析式,进而求解用户差分距离误差。通过计算机仿真对比了解析法和遍历法之间的性能差异,结果表明:解析法的正确性由遍历法得到了验证,解析法可以减少90%的运行时间并且具有更低的计算复杂度,便于工程实现。     

Schemed Power-augmented Flow for Wing-in-ground Effect Craft in Cruise

To provide detailed insight into schemed power-augmented flow for wing-in-ground effect(WIG) craft in view of the concept of cruising with power assistance,this paper presents a numerical study.The engine installed before the wing for power-augmented flow is replaced by a simplified engine model in the simulations,and is considered to be equipped with a thrust vector nozzle.Flow features with different deflected nozzle angles are studied.Comparisons are made on aerodynamics to evaluate performance of power-augmented ram(PAR) modes in cruise.Considerable schemes of power-augmented flow in cruise are described.The air blown from the PAR engine accelerates the flow around wing and a high-speed attached flow near the trailing edge is recorded for certain deflected nozzle angles.This effect takes place and therefore the separation is prevented not only at the trailing edge but also on the whole upper side.The realization of suction varies with PAR modes.It is also found that scheme of blowing air under the wing for PAR engine is aerodynamically not efficient in cruise.The power-augmented flow is extremely complicated.The numerical results give clear depiction of the flow.Optimal scheme of power-augmented flow with respect to the craft in cruise depends on the specific engines and the flight regimes.