LDPC编码系统的码辅助载波相位同步算法

深空通信具有传输距离远、信号衰减严重的特点,针对低信噪比条件下深空通信系统中LDPC编码系统载波同步实现困难的问题,提出一种新的具有较低复杂度的码辅助载波同步算法。分析了载波同步误差对译码性能的影响,基于最大似然准则推导了载波相位的迭代同步算法,算法利用LDPC译码器输出的软判决信息来辅助载波相位的估计,将译码器与载波同步器进行联合迭代,从而得到接近最大似然估计性能的载波相位估计,同时对载波相位进行迭代补偿。仿真结果表明,在低信噪比条件下,算法能够有效纠正载波偏差,并能够以较低的系统复杂度获得近似理想同步的LDPC码译码性能。     

航磁补偿技术及补偿质量的评价方法

航磁补偿的目的是要消除飞机平台引入的干扰磁场,对于高精度航空磁探来说,磁补偿质量直接制约了探测效果。文章按照航磁补偿的执行步骤进行了飞机平台磁干扰建模、模型参数求解方法、补偿飞行方案。另外,为了对补偿飞行的质量进行有效控制,采用量化指标对磁补偿效果进行评价,判定补偿效果的优劣。最后,基于 MFC软件平台开发了航磁补偿系数求解及补偿质量评价软件。     

一种新的最速下降算法在自适应噪声对消中的应用

自适应噪声对消在很多领域有着重要应用。为了进行自适应噪声对消,提出了一种新的最速下降算法。该算法主要原理是对多元二次函数进行降维处理,使其变成一元二次函数,再应用抛物线的性质分别循环迭代地求解每一个维度上的极值。在自适应噪声对消应用中,所提算法与传统的自适应算法进行对比,具有收敛速度快,滤波效果好,滤波效果可调节,抗恶劣信噪比以及急剧变化信噪比,不需选择迭代步长,适合计算机和可编程硬件实现等优点。      

基于释热率分析的钝体贫油熄火过程分析

针对锥形钝体稳定的甲烷-空气预混湍流火焰复杂的熄火过程,采用大涡模拟(LES)与输运方程概率密度函数(TPDF)湍流燃烧模型相结合的模拟方法,研究远离熄火、近熄火及熄火点的火焰和释热率(HRR)数值变化情况,定量分析熄火判据。结果表明:冷态速度模拟结果和实验的相对均方根误差在10%以内,热态误差在20%以内;释热率是否出现在OH和CH₂O重叠的区域,是判断熄火的一个重要参数;远离熄火时,释热率高的区域主要沿内侧剪切层出现;近熄火工况下,释热率在流向轴上闭合,回流区下游也出现较大的释热率;熄火点工况下,较大释热率的区域在回流区下游和上游均有出现;模拟预测的熄火情况和实验PLIF结果一致;平均释热率可作为判断熄火的定量依据,即当钝体后方0.2d处内侧剪切层平均释热率与回流区平均释热率的比值小于4时,发生熄火。      

基于信息融合的网络安全态势量化评估方法

针对目前网络安全态势评估大多存在信息来源单一、评估范围有限、模型不易构建、时空开销大且可信度较低等问题,提出了一种多源异构信息融合量化评估网络安全态势的方法。首先,构建分级朴素贝叶斯分类器,快速高效地融合主机上各多源异构非确定性信息源。然后,利用拉普拉斯原理平滑参数学习,优化分类与推理结果。使用数理统计的方法融合网络上各主机的安全指数,量化评估网络安全态势,对当前网络安全状况有一个宏观整体的认识。最后,通过真实网络环境的实验,验证了所提方法在网络安全态势评估中的可行性和有效性。      

固体火箭发动机燃烧室三维流动数值计算

采用ｋε双方程湍流模型,以ＳＩＭＰＬＥ 计算程式求解翼柱型装药固体火箭发动机燃烧室内三维非定常不可压流ＮＳ 方程．在建立翼柱型装药简化模型的基础上采用边界标志法来表达燃面推移,采用从二维到三维的初场给定方法结合多重网格法求出了多个时间步的非稳态流场结构．计算结果表明燃烧室内旋涡运动呈现一定的空间与时间分布,周向加质导致燃气通道横断面上轴向速度分布的极不均衡．     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

移动刚体激励下弹性梁的振动及其主动控制研究

本文研究了移动刚体激励下弹性梁的振动响应，以简支一弹怀支承梁为例进行了分析计算和实验研究。进而又提出了对弹性梁振动的最优控制方案，并进行了相应的仿真计算和实验研究。所有的实验结果同分析计算结果完全一致。     

一种中心型间断有限元MMALE方法

针对多介质可压缩流体动力学问题,提出了一种单元中心型二维MMALE(Multi-Material Arbitrary Lagrangian-Eulerian)方法.在拉氏步,流体力学方程组采用中心型间断有限元方法求解.对于混合网格,采用Tipton压力松弛模型更新物理量,用等参坐标法更新物质中心点坐标.界面重构采用一种...     

自硬树脂砂型的开裂原因及防止措施

简述了冷硬树脂砂型在某些情况下的产生开裂的原因及机理，讨论了几种解决的方法，有利于改进产品质量，减少双方的经济损失。