CNC数控系统控制软件

本文分析了数控机床控制系统,由硬件NC(Numerical Contro1)向CNC(ComputerNumerical Control)转变时进给速度下降的问题,阐述了解决此问题的一种方法——二次插补方法。指出CNC数控系统是个多重中断系统,论述了将数控的工作按其重要的程度、实时性的高低,安排在不同的优先级,使整个系统协调工作的思想。     

快速阀控制电路

本文介绍快速阀控制电路的用途、技术指标、框图及电路原理。对克服严重现场干扰、使控制电路具有高度可靠性方面所采取的具体措施也进行了比较系统的介绍。     

高超声速飞行器二元进气道试验和计算

设计了一种吸气式面对称高超声速飞行器,针对进气道性能,分别在两座风洞开展通流试验研究。针对第1次风洞试验大攻角状态(α=8°)测量值偏离线性的问题,辅助采用数值模拟手段分析原因,并对试验方案进行改进设计,解决了首次试验出现的问题。结果显示,在典型状态(Ma=5~6)下,进气道起动正常,性能良好,具有一定的抗侧滑能力;随来流马赫数增加,进气道流量系数增大,总压恢复系数减小,计算结果和试验结果一致;试验结果和数值计算的差异主要表现为基本测压方案α>4°后,流量系数和总压恢复系数出现严重的非线性。数值模拟结果表明,主要原因为模型支撑方式及测压方式所引起的偏差,通过改进试验方案,解决了大攻角状态下测量值偏离正常趋势的问题。     

电磁式舵机的驱动设计试验与仿真

针对一种电磁式舵机,基于虚拟仪器技术设计了相应的测试系统,对舵机的动态性能进行了测试分析。考虑到铁磁阻的非线性和漏磁通的分散性,本文采用磁路微分法建立了舵机电磁铁的数学模型,对其动态特性进行仿真分析。结果表明:舵机的性能满足系统设计要求。试验结果与仿真结果基本一致,仿真计算可以用于舵机性能的优化与分析。     

一种高效的基于可靠性的多学科设计优化方法(英文)

Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.     

自适应天线抗干扰性能研究

分析了适用于雷达抗干扰的一些自适应天线波束形成算法,将子空间正交投影算法应用于雷达抗干扰,针对子空间分解过程中特征向量不能完全正交的问题,采用约束化子空间分解算法,来保证子空间特征向量的正交性.最后通过仿真证明:子空间跟踪算法相对于传统的一些自适应算法具有更强的抗干扰性能.     

地球同步卫星BSR硅太阳电池阵输出功率衰减规律分析

长期受粒子辐照、紫外辐照等因素的影响,地球同步卫星的太阳电池阵输出功率会出现较为明显的衰减。这里选取某地球同步卫星使用的背表面反射(BSR)硅太阳电池阵为研究对象,采用光强因子和温度因子修正太阳电池阵的输出功率,使用局部加权回归散点平滑法(LOWESS)分析了其在设计寿命期间的输出功率衰减规律;同时基于LOWESS建立了预测模型,用于硅太阳电池阵超寿运行期间的功率预测。实测数据表明:本文构建的预测模型可以满足超寿地球同步卫星在轨管理使用需求。     

非静止轨道通信卫星星座间同频干扰概率分析

随着全球非静止轨道（non-geostationary orbit,NGSO）通信星座系统的大规模部署及应用,使用相同频率的星座系统之间存在着相互干扰的风险。NGSO系统间同频干扰概率的有效评估方法及合理评价指标是评估干扰风险及设计规避策略的基础,通过分析星座构型与地面站可视空域内卫星出现概率分布特性的关系,利用地面站接收端干扰噪声比保护阈值,建立了概率评估参数指标,并以OneWeb系统、O3b系统以及SpaceX系统为例,分析了全球范围地面站不同NGSO系统间发生有害干扰的概率分布特性。当系统间卫星出现概率分布趋同,会使有害干扰概率增加;反之,不同NGSO系统卫星在可视空域出现概率分布的较大差异会有效降低有害干扰概率。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

A nonlinear background removal method for seismo-ionospheric anomaly analysis under a complex solar activity scenario: A case study of the M9.0 Tohoku earthquake

A precise determination of ionospheric total electron content (TEC) anomaly variations that are likely associated with large earthquakes as observed by global positioning system (GPS) requires the elimination of the ionospheric effect from irregular solar electromagnetic radiation. In particular, revealing the seismo-ionospheric anomalies when earthquakes occurred during periods of high solar activity is of utmost importance. To overcome this constraint, a multiresolution time series processing technique based on wavelet transform applicable to global ionosphere map (GIM) TEC data was used to remove the nonlinear effect from solar radiation for the earthquake that struck Tohoku, Japan, on 11 March, 2011. As a result, it was found that the extracted TEC have a good correlation with the measured solar extreme ultraviolet flux in 26–34 nm (EUV_26–34) and the 10.7 cm solar radio flux (F_10.7). After removing the influence of solar radiation origin in GIM TEC, the analysis results show that the TEC around the forthcoming epicenter and its conjugate were significantly enhanced in the afternoon period of 8 March 2011, 3 days before the earthquake. The spatial distributions of the TEC anomalous and extreme enhancements indicate that the earthquake preparation process had brought with a TEC anomaly area of size approximately 1650 and 5700 km in the latitudinal and longitudinal directions, respectively.