Physical characterization of the deep-space debris WT1190F: A testbed for advanced SSA techniques

We report on extensive ${\mathit{BVR}}_c{I}_c$ photometry and low-resolution ($\lambda /\mathrm{\Delta }\lambda ～250$) spectroscopy of the deep-space debris WT1190F, which impacted Earth offshore from Sri Lanka, on 2015 November 13. In spite of its likely artificial origin (as a relic of some past lunar mission), the case offered important points of discussion for its suggestive connection with the envisaged scenario for a (potentially far more dangerous) natural impactor, like an asteroid or a comet.Our observations indicate for WT1190F an absolute magnitude $R_c={32.45}_{\pm 0.31}$, with a flat dependence of reflectance on the phase angle, such as ${\mathit{dR}}_c/d?～{0.007}_{\pm 2}$?mag?deg^?1. The detected short-timescale variability suggests that the body was likely spinning with a period twice the nominal figure of $P_{\mathrm{flash}}={1.4547}_{\pm 0.0005}\mathrm{s}$, as from the observed lightcurve. In the ${\mathit{BVR}}_c{I}_c$ color domain, WT1190F closely resembled the Planck deep-space probe. This match, together with a depressed reflectance around 4000 and 8500 Å may be suggestive of a “grey” (aluminized) surface texture.The spinning pattern remained in place also along the object fiery entry in the atmosphere, a feature that may have partly shielded the body along its fireball phase perhaps leading a large fraction of its mass to survive intact, now lying underwater along a tight ($～1\times 80$?km) strip of sea, at a depth of 1500?m or less.Under the assumption of Lambertian scatter, an inferred size of ${216}_{\pm 30}/\sqrt{\alpha /0.1}$?cm is obtained for WT1190F. By accounting for non-gravitational dynamical perturbations, the Area-to-Mass ratio of the body was in the range $(0.006?\mathit{AMR}?0.011)$?m²?kg^?1.Both these figures resulted compatible with the two prevailing candidates to WT1190F’s identity, namely the Athena II Trans-Lunar Injection Stage of the Lunar Prospector mission, and the ascent stage of the Apollo 10 lunar module, callsign “Snoopy”. Both candidates have been analyzed in some detail here through accurate 3D CAD design mockup modelling and BRDF reflectance rendering to derive the inherent photometric properties to be compared with the observations.     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

A method of estimating GPS instrumental biases with a convolution algorithm

This paper presents a method of deriving the instrumental differential code biases (DCBs) of GPS satellites and dual frequency receivers. Considering that the total electron content (TEC) varies smoothly over a small area, one ionospheric pierce point (IPP) and four more nearby IPPs were selected to build an equation with a convolution algorithm. In addition, unknown DCB parameters were arranged into a set of equations with GPS observations in a day unit by assuming that DCBs do not vary within a day. Then, the DCBs of satellites and receivers were determined by solving the equation set with the least-squares fitting technique. The performance of this method is examined by applying it to 361?days in 2014 using the observation data from 1311 GPS Earth Observation Network (GEONET) receivers. The result was crosswise-compared with the DCB estimated by the mesh method and the IONEX products from the Center for Orbit Determination in Europe (CODE). The DCB values derived by this method agree with those of the mesh method and the CODE products, with biases of 0.091?ns and 0.321?ns, respectively. The convolution method's accuracy and stability were quite good and showed improvements over the mesh method.     

奥氏体合金熔焊接头形变再结晶态的疲劳性能

焊接接头的微观组织和力学性能不均匀性影响疲劳性能,常用焊后热处理等工艺方法来改善。但奥氏体型合金固态无同素异构转变,焊后热处理难以明显地改善其微观组织和疲劳性能。形变再结晶工艺可以同时改善其微观组织和力学性能,进而可以非常显著地提高该焊接接头的抗疲劳断裂能力。本文主要讨论１Ｃｒ１８Ｎｉ９Ｔｉ熔焊接头形变再结晶态的微观组织和疲劳性能,并以该焊接接头的低循环疲劳性能来验证     

SQP方法在航空发动机加速过程控制中的应用研究

本文研究了采用非线性规划方法中的序列二次规划最优化方法解决涡轮风扇发动机加速过程的最优控制问题。在研究中,考虑了发动机加速过程中的压气机喘振边界、涡轮最高温度限制、转子最高转速限制、燃烧富油熄火限制等各种约束条件,以及执行机构的惯性、延迟等机械特性。仿真结果表明:应用序列二次规划法进行加速最优控制是可行的,发动机在加速过程中能准确地沿着各约束边界进行加速,从而充分发挥了发动机的潜力,大大地改善了发动机的加速性。      

基于Web技术的产品数据管理研究

将Web技术引入产品数据管理系统(PDM)的研究和设计,分析了PDM系统中原有构架的特点与存在的不足,利用Web技术所提供独到的网络、数据库和分布式处理技术,结合开发实例提出了在Internet/Intranet解决方案下开发和研究产品数据管理系统的基本构想,并给出产品数据管理应用的组织和底层数据模式,研究了其对产品数据管理技术应用前景的影响.研究表明,Web技术的引入,将有力地推进产品数据管理技术的发展和应用.      

角速率平台伺服机构的智能控制与容错研究

介绍了角速率平台伺服机构智能控制研制进展。用单片机控制,对角速率反馈通道实现了2次故障判别、1次系统重构。用Fuzzy控制建立了相应隶属函数,确定了故障判别阈值。实验表明系统工作稳定,故障的Fuzzy差别合理,故障通道切换平稳,重构后系统工作仍正常。     

自适应变结构神经网络在航空发动机故障诊断上的应用

根据样本空间的内积特性,提出一种无需迭代学习的自适应变结构神经网络。它的特点是学习速度快,准确性高,且能根据出现的新样本,随时改变结构。在对某型航空发动机故障诊断中,比原软件包采用的方法在准确性方面有显着提高,而且维护工作量减少,并具有实时处理能力,因此有着良好的推广应用前景。      

处于非均匀温度场中含裂纹变厚度旋转盘的应力强度因子广义J积分解法

本文首先从直法线假设出发导出了处于非均匀温度场中变厚度各向同性钣元素本构方程并证明该方程与等厚度正交各向异性钣元素的本构方程相同。然后本文从上述本构方程出发,引用自由能与熵函数以及固体力学所有基本方程导出了与积分路径无关的广义J积分J_8,该广义J积分可用于处在非均匀温度场中的含裂纹变厚度旋转盘。最后本文应用这个广义J积分与有限元素法计算了涡轮盘应力强度.因子K_1并得到了令人满意的结果。