月面高温下推力器可靠性试验

嫦娥五号着陆上升组合体落月后将经历月昼强红外辐射环境，由于推力器喷管导热影响，使推进剂管路与电磁阀面临高温环境，推进系统存在管路内氧化剂汽化和推力器性能下降甚至无法正常工作的问题，影响上升器月面起飞正常姿态控制。为了研究高温下推力器的工作性能，进行了高温下氟塑料阀芯与氧化剂相容性调研，提出了电磁阀和推力器可靠性增长及可靠性验证试验方法，分析了温度与电磁阀阀芯行程的关系，获取了高温环境下推力器的稳态及脉冲工作性能，在小子样条件下评估了推力器可靠性置信下限及月面起飞上升推进系统可靠度，通过月面高温排气及月面起飞上升姿态控制对研究结果进行了航天器在轨飞行验证，圆满完成了上升器月面起飞上升任务。所提出的研究方法及思路具有很好的工程适用性。     

童话之城——哥本哈根

哥本哈根位于波罗的海和北海之间的厄勒海峡西岸,集聚着充满童话气质的古堡与皇宫、乡村与庄园。不论是沉淀了古老历史的还是延续着皇族传奇的各类建筑,都鳞次栉比地坐落在这里。哥本哈根融合了古典与现代的艺术气息,阿肯艺术中心、路易斯安娜博物馆、国家博物馆、丹麦国家美术馆等众多艺术博物馆各领风骚。富有皇族气质的哥本哈根,贯穿着全年度的各种主题节庆,令狂欢从夏季一直延续到冬季。最著名的莫过于哥本哈根国际爵士音乐节,在每年7月将持续整整10天,着实是不容错过的年度盛会!     

The Evolving Sigmoid: Evidence for Magnetic Flux Ropes in the Corona Before, During, and After CMES

It is generally accepted that the energy that drives coronal mass ejections (CMEs) is magnetic in origin. Sheared and twisted coronal fields can store free magnetic energy which ultimately is released in the CME. We explore the possibility of the specific magnetic configuration of a magnetic flux rope of field lines that twist about an axial field line. The flux rope model predicts coronal observables, including heating along forward or inverse S-shaped, or sigmoid, topological surfaces. Therefore, studying the observed evolution of such sigmoids prior to, during, and after the CME gives us crucial insight into the physics of coronal storage and release of magnetic energy. In particular, we consider (1) soft-X-ray sigmoids, both transient and persistent; (2) The formation of a current sheet and cusp-shaped post-flare loops below the CME; (3) Reappearance of sigmoids after CMEs; (4) Partially erupting filaments; (5) Magnetic cloud observations of filament material.     

中层大气受迫Rossby波包的非线性相互作用：Ⅱ.数值计算

本文对中层大气受迫Ｒｏｓｓｂｙ波包的非线性三波相互作用问题作了进一步的数值分析，结果表明，三个波包随时间演化达到的平衡态与文献［１］的理论结果完全一致，而且仅当系统中只有中等波长波包不受外源强迫时，系统运动有可能出现两个稳定平衡态，在一定外源强度范围内，平衡态会产生尖点突变，平衡态随外源的变化有滞后分岔的特征，系统运动最终达到的平衡态不仅与外源强度的变化方式有关，而且依赖于初始状态。     

浮动零点法及其在声表面波（SAW）传感器中的应用

温度是影响传感器精度的重要因素。本文介绍了一种新的温度误差校正方法，即浮动零点法。该方法以差动原理和浮动坐标为基础，是实现温度校正较为理想的方法。     

Linux路由实现机制分析

通过对Linux2.4.20版内核路由模块代码的分析和研究,详尽地阐述了Linux路由机制的实现思想和技术特点,对于更好地使用Linux的路由功能和在Linux路由上进行二次开发都具有实际的指导意义。     

A Class of TVD Type Combined Numerical Scheme for MHD Equations With a Survey About Numerical Methods in Solar Wind Simulations

It has been believed that three-dimensional, numerical, magnetohydrodynamic (MHD) modelling must play a crucial role in a seamless forecasting system. This system refers to space weather originating on the sun; propagation of disturbances through the solar wind and interplanetary magnetic field (IMF), and thence, transmission into the magnetosphere, ionosphere, and thermosphere. This role comes as no surprise to numerical modelers that participate in the numerical modelling of atmospheric environments as well as the meteorological conditions at Earth. Space scientists have paid great attention to operational numerical space weather prediction models. To this purpose practical progress has been made in the past years. Here first is reviewed the progress of the numerical methods in solar wind modelling. Then, based on our discussion, a new numerical scheme of total variation diminishing (TVD) type for magnetohydrodynamic equations in spherical coordinates is proposed by taking into account convergence, stability and resolution. This new MHD model is established by solving the fluid equations of MHD system with a modified Lax-Friedrichs scheme and the magnetic induction equations with MacCormack II scheme for the purpose of developing a combined scheme of quick convergence as well as of TVD property. To verify the validation of the scheme, the propagation of one-dimensional MHD fast and slow shock problem is discussed with the numerical results conforming to the existing results obtained by the piece-wise parabolic method (PPM). Finally, some conclusions are made. This revised version was published online in August 2006 with corrections to the Cover Date.     

Physical characterization of the deep-space debris WT1190F: A testbed for advanced SSA techniques

We report on extensive ${\mathit{BVR}}_c{I}_c$ photometry and low-resolution ($\lambda /\mathrm{\Delta }\lambda ～250$) spectroscopy of the deep-space debris WT1190F, which impacted Earth offshore from Sri Lanka, on 2015 November 13. In spite of its likely artificial origin (as a relic of some past lunar mission), the case offered important points of discussion for its suggestive connection with the envisaged scenario for a (potentially far more dangerous) natural impactor, like an asteroid or a comet.Our observations indicate for WT1190F an absolute magnitude $R_c={32.45}_{\pm 0.31}$, with a flat dependence of reflectance on the phase angle, such as ${\mathit{dR}}_c/d?～{0.007}_{\pm 2}$?mag?deg^?1. The detected short-timescale variability suggests that the body was likely spinning with a period twice the nominal figure of $P_{\mathrm{flash}}={1.4547}_{\pm 0.0005}\mathrm{s}$, as from the observed lightcurve. In the ${\mathit{BVR}}_c{I}_c$ color domain, WT1190F closely resembled the Planck deep-space probe. This match, together with a depressed reflectance around 4000 and 8500 Å may be suggestive of a “grey” (aluminized) surface texture.The spinning pattern remained in place also along the object fiery entry in the atmosphere, a feature that may have partly shielded the body along its fireball phase perhaps leading a large fraction of its mass to survive intact, now lying underwater along a tight ($～1\times 80$?km) strip of sea, at a depth of 1500?m or less.Under the assumption of Lambertian scatter, an inferred size of ${216}_{\pm 30}/\sqrt{\alpha /0.1}$?cm is obtained for WT1190F. By accounting for non-gravitational dynamical perturbations, the Area-to-Mass ratio of the body was in the range $(0.006?\mathit{AMR}?0.011)$?m²?kg^?1.Both these figures resulted compatible with the two prevailing candidates to WT1190F’s identity, namely the Athena II Trans-Lunar Injection Stage of the Lunar Prospector mission, and the ascent stage of the Apollo 10 lunar module, callsign “Snoopy”. Both candidates have been analyzed in some detail here through accurate 3D CAD design mockup modelling and BRDF reflectance rendering to derive the inherent photometric properties to be compared with the observations.     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

A method of estimating GPS instrumental biases with a convolution algorithm

This paper presents a method of deriving the instrumental differential code biases (DCBs) of GPS satellites and dual frequency receivers. Considering that the total electron content (TEC) varies smoothly over a small area, one ionospheric pierce point (IPP) and four more nearby IPPs were selected to build an equation with a convolution algorithm. In addition, unknown DCB parameters were arranged into a set of equations with GPS observations in a day unit by assuming that DCBs do not vary within a day. Then, the DCBs of satellites and receivers were determined by solving the equation set with the least-squares fitting technique. The performance of this method is examined by applying it to 361?days in 2014 using the observation data from 1311 GPS Earth Observation Network (GEONET) receivers. The result was crosswise-compared with the DCB estimated by the mesh method and the IONEX products from the Center for Orbit Determination in Europe (CODE). The DCB values derived by this method agree with those of the mesh method and the CODE products, with biases of 0.091?ns and 0.321?ns, respectively. The convolution method's accuracy and stability were quite good and showed improvements over the mesh method.