比例式变推力固体姿控发动机非稳态特性研究

为了研究比例式变推力固体姿控发动机的内流场非稳态特性,建立了比例针栓推力器的二维轴对称计算模型,基于动网格技术模拟入口压强随喉部面积变化而变化的推力器工作模式,得到了内流场各性能参数的变化规律。结果表明:在非稳态工作过程中,内流场会出现典型的亚音速回流区、斜激波和流动分离等特征,入口压强、针栓壁面及喷管壁面压强均随针栓靠近喉部而增大,推力器推力逐渐上升,实现了推力连续调节。开关频率会加剧针栓前进过程中头部压强波动。针栓头部收敛角越大,其头部回流区越小。当喉部面积一定时,燃速压强指数越高,发动机压强与推力变化范围越大,为实现预设的推力调节范围,需要选择合适的燃速压强指数。     

基于单代号网络的银行家算法

通过对银行家算法的分析,提出单代号网络的进程安全状态序列的改进算法-基于单代号网络的银行家算法,并通过具体的示例实现此算法。     

电子干扰对低可观测飞行器飞行路径规划的影响

为了提高巡航导弹的低空突防能力,在分析电子干扰对雷达网威胁区域的影响后认为:在多重干扰条件下,雷达探测空间会顺着干扰方向产生内凹和偏移,因此,建立了新的雷达探测空间模型.采用空间对象间拓扑关系推理方法建立了飞行器飞行路径规划目标函数中雷达威胁指数模型,然后改进了飞行器飞行路径规划模型,并在此基础上进行了巡航导弹飞行路径规划的软件仿真.仿真结果表明:考虑电子干扰对雷达威胁区域的影响情况下规划的飞行路径能够回避雷达威胁,有效提高飞行器低空突防能力.     

机动目标拦截末制导状态估计器的误差特性

 针对大机动目标拦截问题,分析了末制导阶段目标机动条件下状态估计器的误差特性。首先将目标机动输入未知时的状态估计器模型表示为一随机线性混合系统,当混合系统的模式跳变事件满足可观测性条件时,模式决策过程可等效为真实模式的延迟;随后推导了模式决策延迟条件下估计误差的动态方程与传递函数,并得到了一定误差要求下模式决策延迟的上界与目标机动模式逗留时间的下界;最后通过空空导弹拦截高速战机的典型实例验证了该理论分析的正确性。研究结果为设计此类线性混合系统估计器提供了理论依据。     

一种高效的基于可靠性的多学科设计优化方法(英文)

Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.     

合成孔径雷达卫星构型设计

合成孔径雷(Synthetic Aperture Radar,简称SAR)卫星的构型与其它卫星相比具有一定的特殊性,主要体现在大面积的相控平面SAR天线在工作时需侧视(长度方向沿飞行方向)和SAR天线与太阳电池阵之间的相容性.通过分析SAR卫星构型的特点,根据卫星构型设计的原则,结合SAR卫星的构型实例,给出SAR卫星构型设计的基本思路和方法.     

电磁式舵机的驱动设计试验与仿真

针对一种电磁式舵机,基于虚拟仪器技术设计了相应的测试系统,对舵机的动态性能进行了测试分析。考虑到铁磁阻的非线性和漏磁通的分散性,本文采用磁路微分法建立了舵机电磁铁的数学模型,对其动态特性进行仿真分析。结果表明:舵机的性能满足系统设计要求。试验结果与仿真结果基本一致,仿真计算可以用于舵机性能的优化与分析。     

空间绳系编队的动力学及稳定展开控制研究

以三角构型的空间绳系编队系统为对象开展了动力学特性分析和稳定展开控制研究。首先，针对以往编队动力学建模的精度问题，采用Lagrange法建立了系统动力学模型，建模时充分考虑了系绳的弹性，可在不增加计算量的同时保留系统的弹性特性。其次，根据所建立的动力学模型，定量分析了编队自旋稳定时自转角速度的范围，为之后的稳定展开控制提供理论依据。由于受制于执行机构精度和控制输入的限制，空间绳系编队系统是一个典型的欠驱动系统，采用分层滑模实现编队的稳定展开控制，仿真结果验证了该控制方法的有效性。     

Application of CCD drift-scan photoelectric technique on monitoring GEO satellites

Geosynchronous Earth Orbit (GEO) satellites are widely used because of their unique characteristics of high-orbit and remaining permanently in the same area of the sky. Precise monitoring of GEO satellites can provide a key reference for the judgment of satellite operation status, the capture and identification of targets, and the analysis of collision warning. The observation using ground-based optical telescopes plays an important role in the field of monitoring GEO targets. Different from distant celestial bodies, there is a relative movement between the GEO target and the background reference stars, which makes the conventional observation method limited for long focal length telescopes. CCD drift-scan photoelectric technique is applied on monitoring GEO targets. In the case of parking the telescope, the good round images of the background reference stars and the GEO target at the same sky region can be obtained through the alternating observation of CCD drift-scan mode and CCD stare mode, so as to improve the precision of celestial positioning for the GEO target. Observation experiments of GEO targets were carried out with 1.56-meter telescope of Shanghai Astronomical Observatory. The results show that the application of CCD drift-scan photoelectric technique makes the precision of observing the GEO target reach the level of 0.2″, which gives full play to the advantage of the long focal length of the telescope. The effect of orbit improvement based on multi-pass of observations is obvious and the prediction precision of extrapolating to 72-h is in the order of several arc seconds in azimuth and elevation.