Impact of one satellite outage on ARAIM depleted constellation configurations

Advanced Receiver Autonomous Integrity Monitoring(ARAIM) is a new technology that will provide worldwide coverage of vertical guidance in aviation navigation. The ARAIM performance and improvement under depleted constellations is a practical problem that needs to be faced and researched further. It is a shortcut that improves the availability in position domain whose key idea is to replace the conventional least squares process with a non-least-squares estimator to lower the integrity risk in exchange for a slight increase in nominal position error. The contributions given in this paper include two parts: First, the impacts of one satellite outage on different constellations are analyzed and compared. The conclusion is that GPS is more sensitive and vulnerable to one satellite outage. Second, a constellation weighted ARAIM(CW-ARAIM)position estimator is proposed. The position solution is replaced by a constellation weighted average solution to eliminate the constellation difference. The new solution will move close to the constellation solutions with respect to the accuracy requirement. The simulation results under baseline GPS and Galileo dual-constellation show that the one GPS satellite outage will knock the availability from 91% to only 50%. The performance remains stable with one Galileo satellite outage. With the assistance of the CW-ARAIM method, the availability can increase from 50% to more than80% under depleted GPS configurations. Even without any satellite outage, the proposed method can effectively improve the availability from 91.29% to 98.75%. The test results under optimistic constellations further verify that a balanced constellation is more important than more satellites on orbit and the superiority of CW-ARAIM method is still effective.     

Multiple hierarchy risk assessment with hybrid model for safety enhancing of unmanned subscale BWB demonstrator flight test

To explore the low-speed characteristics of the Blended-Wing-Body (BWB) configuration for future civil aircraft, a series of unmanned subscale demonstrators have been developed and tested by our research team. During this process, specific safety risks deriving from uncertain design features, system unreliability, and insufficient personnel experience caused continuous flight test mishaps and the risk mechanism was not clear. Local and trial-and-error learning driven safety improvements took few effects on mishap prevention, so our focus was turned to look for systematic safety strategies. This paper establishes a systems theory based hybrid model to integrate the physical system reliability analysis techniques with the system dynamics method for illustrating the multiple risk interactions of the demonstrator flight test involving organizational, human resource and technical system factors. Using the prior BB-5 demonstrator as a case, the hybrid model simulation represents its historical risk evolution process, which verifies the model rationality. Derived risk control strategies reduced the mishap rate of a new demonstrator called BB-6 Sprit. The paper also shows the extended hybrid model can be applied on safety management of unmanned aerial vehicles from the initial period of vehicle development.     

玫瑰扫描光学系统头罩气动热建模与仿真

在导弹高速飞行过程中，光学头罩的温度受气动热效应作用而急剧升高，会产生严重的气动热辐射效应。为研究头罩气动热对玫瑰扫描光学系统的影响，建立了基于CFD流体仿真软件的头罩温度场模型。在仿真软件对光学系统结构进行三维建模后，通过光学软件对头罩热辐射对探测器的影响进行了仿真和计算。仿真结果表明：玫瑰扫描光学系统对头罩的温度梯度较为敏感，当头罩温度非均匀分布时，探测器会接收到气动热辐射干扰信号，对弱小目标的正常探测和提取产生干扰，气动热辐射效应不容忽视。     

值班稳定器燃烧室值班火焰的火焰传递函数研究

为了研究值班火焰的动态特性,采用实验方法获得值班稳定器模型燃烧室中值班火焰的火焰传递函数。燃烧室的动态压力利用动态压力传感器测量,火焰的全局非定常热释放利用光电倍增管测量,光电倍增管采用了CH*带通滤波器,动态压力传感器和光电倍增管可以实现同步采集,利用高速摄像机捕捉了火焰的动态过程。利用速度脉动和非定常热释放得到值班火焰的火焰传递函数,其中速度脉动利用双传声器法和压力脉动数据计算得到。实验结果表明,当值班级甲烷流量为0.552g/s,0.621g/s和0.69g/s时,值班火焰不稳定,延迟时间分别为0.0116s,0.00675s和0.0133s。     

基于算子理论的系统可重构性评价与自主重构

针对航天器在轨资源严重受限（包括计算资源、硬件资源以及能量资源）的特点，开展了基于算子理论的航天器姿态控制系统可重构性评价方法和自主重构策略的研究。首先，基于稳定核表示（SKR）和稳定像表示（SIR）的算子理论给出了系统可重构性评价指标，定量地描述了系统的重构能力，突破了基于互质分解理论的系统可重构性评价方法对系统线性性质的局限。同时，基于以上结果，给出了系统可重构性最大边界，为设计人员设计自主重构策略提供了明确的指标；然后，通过在设计阶段考虑系统可重构性，充分挖掘并利用系统重构潜力，为自主重构策略的设计提供理论指导；最后，通过仿真验证了所提方法的有效性和正确性。     

人机标准陆空通话系统

陆空通话是航指挥的基本功，它为航管人员与飞行员信息勾通架起一座桥梁。本文介绍利用计算机多媒体技术开发的人机标准陆空通话自学习系统，它可以根据学员自身的学习效果，控制学习进度。该系统可以有效地促进、提高学员的听说能力。     

CAD技术在包装装潢设计领域的应用

从计算机图形学的角度出发,利用真实感图形的理论,在包装装潢图案自动化设计、立体效果自动显示方面做了一些探讨,研制出相应的包装装潢设计CAD系统软件.该系统主要是在微机上完成包装装潢设计,包括容器造型设计、装潢方案设计和装潢效果显示等,为包装设计人员提供在微机上进行包装设计的手段,以实现包装装潢设计的自动化.     

研究两相流流动特性的测量系统

一种在气-液两相流或液相流中流动特性的测量系统,其结构简单、操作方便、实用性强;它可以自动地移动测量探针、进行多通道的数据采集和对实测数据进行实时处理;采样频率可达几十万赫兹; 这个系统适用于处理各种仪表输出的模拟或数字信号。本文描述了测量气泡速度、气泡大小、含气率、混匀时间和剪切应力等的电位探针和电化学技术。这个系统在许多实验中得到应用。     

模具设计中的使用寿命及新技术应用初探

从合理选用模具材料、模具的热处理工艺、模具的机械加工工艺等；个方面提出了提高模具使用寿命的方法，并分析了新技术、新成果在其中的应用。