A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

门限自回归模型参数的局部正交设计寻优法

在采用点值图确定门限区间个数的基础上，对门自回归模型中门限值、滞后步长、各门限区间模型阶数，利用正交设计方法寻优，计算工作量锐减，却可得到精度较高的预报模型。     

试论高校职业指导工作的开展与推动

高校职业指导工作是一项复杂的系统工程,这项工作的开展与推动,是贯彻落实党和国家的就业方针、政策的需要,事关毕业生的职业前途与人生目标的实现,对高校教育事业的可持续发展,具有明显的现实意义和重要的战略意义,需要采取切实有效的策略。     

弹道导弹中段机动突防研究

针对弹道导弹中段机动突防问题，在瞬时冲量假设下从理论上研究了速度增量大小、方向和机动时刻对零控脱靶量和落点偏差的影响。研究表明：速度增量大小和机动时刻给定时，零控脱靶量随速度增量方向不同存在极小值和极大值，速度增量方向垂直于视线方向时零控脱靶量接近最大，且最大值近似为待飞时间和速度增量大小的乘积；速度增量大小和机动时刻给定时，落点偏差随速度增量方向的不同存在极小值和极大值，极值点对应的速度增量方向可通过解析方法求解，落点偏差极大值与速度增量大小成正比，且机动时刻越晚，落点偏差极大值越小。该研究可为突防方案设计提供理论基础。     

动态差压检测系统的共模误差研究

主要针对以差压变送器为核心的动态差压检测系统的特点 ,应用流体网络分析方法 ,提出了动态差压检测系统中的共模误差问题。理论分析和仿真计算结果表明 :共模误差与检测系统两侧引压管路的不一致性直接相关 ,为了获得动态差压信号的准确检测 ,必须对动态差压检测系统的共模误差予以抑制     

锌渣的固化处理及浸出毒性试验研究

采用药剂稳定化、水泥固化以及二者结合等方法对锌渣进行了处理研究。结果表明重金属螯合剂的药剂稳定化和水泥固化相结合的方法处理锌渣,其重金属含量可以低于固体废物毒性浸出标准的限值,能有效控制对周围环境的污染。所以,采用药剂稳定化和水泥固化结合的方法处理锌渣是完全可行的。     

低频声波对水雾消散作用的实验研究

作者考查了低频声波(<50Hz)对于水雾消散的作用。通过建立声波消雾实验装置,测定了在水雾消散过程中,雾室内的声场分布、温度、消雾时间、雾滴谱的变化过程。实验结果表明声波作用对于水雾的消散具有明显的作用。并且,消雾的效果随着作用声波的频率和声压级(SPL)呈规律性的变化趋势。较低频率和较高声强的声波作用更有利于水雾的消散,在消雾的过程中温度起伏不大。而声致凝聚是声波消雾的主要因素之一。     

尾支杆干扰非线性修正方法的初步研究

利用CFD方法 ,采用两套网格重叠的形式 ,研究了一种对尾支杆干扰进行修正的非线性方法。运用本方法 ,研究了尾支杆等直段长度、直径和锥角对模型气动特性的影响 ,研究了四个模型有攻角时的尾支杆干扰 ,并对GBM 0 4A模型的零阻进行了尾支杆干扰的修正。