多通道飞控计算机软件的调试支持

通常多通道飞控计算机的程序存储和执行均在EPROM中完成 ,程序的前期开发和调试则通过将其加载到RAM中进行。但是 ,由于目前通用的调试系统都是单通道的源程序级调试系统 ,若采用它们的简单组合 ,其性能无法满足多通道程序的调试需求 ;另外由于RAM和EPROM访问时序的不同 ,在RAM中调试正确的程序不能证明在EPROM中执行也正确。本文介绍了一种支持多通道飞控计算机软件调试功能的软硬件设计。     

低膨胀高温合金的发展及在航空航天业的应用

回顾了低膨胀高温合金的发展历史."因瓦效应"和"时效硬化"现象的发现奠定了低膨胀高温合金发展的基础.20世纪70年代航空航天事业的迅猛发展以及能源危机的爆发为低膨胀高温合金在航空航天业的实际应用提供了宝贵的契机, 最早的商用Fe-Ni-Co(IN9××)系列合金,经过用Nb、Ti强化,去Al,加Si等一系列成分上的变化,显著改善其应力加速晶界氧化脆性(SAGBO性能),从此低膨胀高温合金在航空航天领域得到大量应用.为改善此类合金的抗氧化和降低裂纹扩展速率等性能,又进行了新合金系的研究,即以Inconel 783合金为代表的Fe-Ni-Co-Al-Cr系合金和以Haynes 242合金为代表的Ni-Mo-Cr系合金的研究,这些合金在750℃仍能达到完全抗氧化,为新一代飞机发动机的发展提供了优质材料.     

飞机支柱式起落架落震仿真及缓冲器优化分析

主要介绍支柱式起落架缓冲器的各个参数,包括缓冲支柱的初压力、初容积、油孔面积、活塞面积、缓冲支柱行程等。介绍起落架落震时缓冲器轴向载荷的计算公式。结合具体飞机型号利用初始参数通过AD-AMS软件建立数值模型并进行仿真分析,计算结果与试验结果比较,发现两者具有较好的一致性。最后以起落架缓冲器的油孔面积作为设计参数进行优化分析,给出最优值。     

Present-Day Sea Level Change: Observations and Causes

We investigate climate-related processes causing variations of the global mean sea level on interannual to decadal time scale. We focus on thermal expansion of the oceans and continental water mass balance. We show that during the 1990s where global mean sea level change has been measured by Topex/Poseidon satellite altimetry, thermal expansion is the dominant contribution to the observed 2.5 mm/yr sea level rise. For the past decades, exchange of water between continental reservoirs and oceans had a small, but not totally negligible contribution (about 0.2 mm/yr) to sea level rise. For the last four decades, thermal contribution is estimated to about 0.5 mm/yr, with a possible accelerated rate of thermosteric rise during the 1990s. Topex/Poseidon shows an increase in mean sea level of 2.5 mm/yr over the last decade, a value about two times larger than reported by historical tide gauges. This would suggest that there has been significant acceleration of sea level rise in the recent past, possibly related to ocean warming. This revised version was published online in August 2006 with corrections to the Cover Date.     

利用改正数信息的北斗三号实时精密单点定位及性能分析

北斗三号全球卫星导航系统已正式建成并开通服务。为了利用实时改正数信息系统地揭示北斗三号精密单点定位性能，并为用户提供理论依据和应用参考，首先解算了卫星实时精密轨道、钟差及其改正数，分析了其精度。然后基于实时改正数信息，利用监测站广播星历和观测数据，分别进行了双频静态、双频仿动态、单频静态和单频仿动态仿实时精密单点定位，以评估其性能。结果表明：北斗三号MEO卫星实时轨道和钟差精度均值分别约为12cm和0.2ns，满足实时精密单点定位需求。静态实时精密单点定位精度优于动态，双频优于单频，均可达到分米级。对于定位收敛时间，双频静态最短，约为40min；双频动态和单频静态均约为85min；单频动态最长，约为120min。     

激波过弯道绕双圆柱流场

采用单曝光光栅干涉或双曝光光栅干涉，研究激波过弯道绕双圆柱传播的微波流场。采用单曝光法，成功显示入射激波到第一圆柱上的反射、绕射，到达第二圆柱上的反射、绕射。在同一底片上采用双次曝光，第一次脉冲记录直道上的平面波，第二次脉冲记录激渡过弯道绕双圆柱流场。这些照片对于研究反射、绕射及它们边界的相互作用是很有用的。     

Mo M-PO/SBR Algorithm Based on Collaborative Platform and Mixed Model

For electromagnetic scattering of 3-D complex electrically large conducting targets,a new hybrid algorithm,Mo M-PO/SBR algorithm,is presented to realize the interaction of information between method of moment(Mo M)and physical optics(PO)/shooting and bouncing ray(SBR). In the algorithm,the COC file that based on the Huygens equivalent principle is introduced,and the conversion interface between the equivalent surface and the target is established. And then,the multi-task flow model presented in this paper is adopted to conduct CPU/graphics processing unit(GPU)tests of the algorithm under three modes,i.e.,MPI/Open MP,MPI/compute unified device architecture(CUDA) and multi-task programming model(MTPM). Numerical results are presented and compared with reference solutions in order to illustrate the accuracy and the efficiency of the proposed algorithm.     

总线通讯实验系统中矢量字的处理方法

研究了在1553B总线通讯实验系统远程终端（RT）仿真中矢量字的处理方法。设计了矢量字的手动单个设置、自动更新和使能RT中断更新三种处理方法。详细分析了各种方法中数据传输的执行过程。由于实验系统中能够灵活地设置矢量字,因此可以实现对采用更新机制传输消息的通讯过程的仿真。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

工业园区配套住房的成本分担机制——以东北某市谋划的“廉租家户式公寓”为例

农业转移人口市民化成本是新型城镇化推进的主要障碍,其中住房成本占有较大的份额。工业园区是农业转移人口的就业集聚区,现有的保障性住房供给体系并未将农民工全面纳入,尚未充分考虑农业转移人口的临时性居住问题。东北某市运用成本分担机制谋划的"廉租家户式公寓"项目,实现了农业转移人口短期居住的"优区位、高品质、全配套、低租金",形成了政府、企业、个人三方积极参与、合作共赢的格局。该模式的核心要义在于政府的克己惠民,或将成为工业园区周边配套住房供给的可推广模式。