低空突防任务下综合飞行/推进系统的建模与仿真

建立了综合飞行／推进系统的数学模型，介绍了飞机全维非线性数学模型和涡轮风扇发动机非线性部件级数学模型的建模及综合方法。对飞机执行地形中随任务时，飞行员调节飞行速度的方法与基于总能量的调节飞行速度的方法进行了比较。结果表明，基于总能量的方法比飞行员直接控制飞行速度能够减小发动机的燃油消耗，降低发动机的磨损，进而可以增加飞机的航程，延长发动机的使用寿命。     

铝合金定向凝固过程枝晶生长的相场法模拟

本文基于Wang等人提出的熵函数公式。在假定平衡时同液界面处固、液相的化学势相同而溶质浓度不同的基础上。推导了一个新的二元合金相场模型。并利用该相场模型与溶质场进行耦合计算，以Al-4．5％Cu合金为例模拟了二元台金等温凝固定向凝固的枝晶生长过程。研究了在正温度梯度情况下二元合金过冷熔体中的等轴枝品和柱状晶的生长过程及其溶质场的分布情况。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

一种基于信息融合的卫星自主天文导航新方法

直接敏感地平和利用星光折射间接敏感地平是两种基于天体敏感器的自主天文导航方法,其定位精度主要取决于地平的敏感精度。通常利用红外地平仪直接敏感地平的方法简单、可靠,但精度较低,而近年出现的利用星光折射间接敏感地平的方法精度高,但必须能观测到符合一定条件的折射星,根据上述两种方法的特点,提出了一种基于信息融合的直接敏感地平和利用星光折射间接敏感地平相结合的自主天文导航的新方法,计算机仿真结果表明该方法可以进一步提高系统的精度和可靠性。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

基于UKF的航天器最小参数姿态矩阵估计方法

钊对航天器的惯性-星光姿态确定系统，选取基于矢量观测的最小参数姿态矩阵估计方法为定姿算法。但是由于系统模型是非线性的，针对系统模型的非线性，将UKF（Unscented Kalman Filter）与最小参数姿态矩阵估计方法结合，设计了一种针对MEMS陀螺和CMOS APS星敏感器的UKF姿念估计器。仿真结果表明：在敏感器精度较差的情况下，该UKF、姿态估计器能够满足大多数航天器对姿态确定精度的要求。此外，UKF和EKF（Extended Kalman Filter）的仿真对比结果表明：UKF滤波器的收敛速度高于EKF滤波器，状态估计的精度也优于EKF滤波器，且数值稳定性好。     

国外几种新型微化学推力器

介绍了国外几种以微机电系统 (MEMS)技术为基础的液体和固体微化学推力器。这些新型微化学推力器具有MEMS技术微型化、低成本和批量生产的优点 ,并考虑了体积限制和高度集成等空间限制 ,能产生 10 -6～ 10N·s的推力脉冲 ,可用于微型卫星和纳米卫星的姿态调整、变轨和定向的精确控制。同时阐述了这几种微推力器结构特点和制造工艺 ,并与其他类型的推进器进行了比较