论网络传媒对传统图书馆的挑战与应对

网络技术的发展,加快了图书馆现代化建设的步伐。从网络传媒对传统图书馆的影响、对图书馆定义的再思考、网络时代高校图书馆发展的模式三个方面,分析研究网络传媒对传统图书馆的挑战与应对。     

尾支杆干扰非线性修正方法的初步研究

利用CFD方法 ,采用两套网格重叠的形式 ,研究了一种对尾支杆干扰进行修正的非线性方法。运用本方法 ,研究了尾支杆等直段长度、直径和锥角对模型气动特性的影响 ,研究了四个模型有攻角时的尾支杆干扰 ,并对GBM 0 4A模型的零阻进行了尾支杆干扰的修正。     

行军环境中发射箱贮存失效模式研究

研究了行军环境中发射箱的贮存失效模式,指出湿热和日照辐射是造成发射箱贮存能力下降和失效的主要原因.建立了行军环境中发射箱的传热和泄露过程数学模型,计算了发射箱内温度-时间及压力-时间变化规律,计算结果与现场测试结果吻合.提出了提高发射箱的环境适应能力的建议.     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

用FVM法计算固体火箭羽流的红外特性

建立了有限体积法(FVM)的理论模型模拟固体火箭羽流的红外特性,研究了燃气组分H2O,CO2,CO,HCL,OH,NO的吸收和发射,以及AL2O3粒子云的吸收、发射和散射,还研究了两相流场中气相和粒子云温度不均匀时对辐射传输方程的修正。计算一单喷管固体火箭的二维轴对称羽流在光谱2~5μm的红外特性,给出羽流辐射的空间分布和光谱分布并与文献计算的结果对比。研究表明:有限体积法能较好地模拟固体火箭羽流的红外特性;粒子辐射占固体火箭羽流红外辐射的主要部分;在光谱2~4μm粒子辐射使羽流辐射增强,而在光谱4~5μm粒子辐射使羽流辐射减弱。     

网络最大流与最小割集的矩阵算法

本文给出了解决运输问题为中心的一类特殊的线性规划问题的新的、简便的算法。网络最大流与最小割集的矩阵算法,不仅能解决许多这类问题,而且能使最小费用流、分配问题和运输问题容易通过计算机来实现。