动态三角翼的非定常气动特性和压力分布相关研究

文章介绍了不同后掠角三角翼在进行俯仰振荡时的动态压力特性,说明这种动态压力特性同三角翼的法向力的变化是密切相关的,试验研究揭示了流态、压力和气动力之间的密切关系。同时试验研究显示三角翼上翼面压力的动态变化曲线呈现出双峰形态;不同后掠角三角翼在动态试验过程中压力、法向力都具有相似特性。     

子波变换在实验流体力学中的应用

介绍了子波分析的历史、基本知识以及在实验流体力学方面的应用。讨论了子波变换在客观辨识湍流边界层相干结构方面的应用。作者用子波变换的方法提出了确定湍流边界层相干结构挥发时间尺度的能量最大准则，提取了相干结构对应的速度信号波形。用于波变换研究了湍流边界层脉动速度信号的局部奇异性行为，发现相干结构发生处脉动速度信号的局部奇异性指数为负值。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

用弹性环加强的孔口应力分析的链杆法

关于用弹性环加强的孔口应力分析问题,本文给出了一个新的分析方法——链杆法。即假定环和板之间在孔口用链杆来联系,然后用力法求出链杆的约束力,进而可确定板的应力和环的内力。将本文结果和萨文的结果作了比较,两者基本一致,说明了链杆法的有效性。它的优点是直观、方便,计算较简单,适用面较广。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

航天光学采样成像系统MTF的优化设计与MTFC

简要介绍了成像链、成像系统和遥感系统的概念；对像质和像质差异的表征和度量、成像系统性能的表征等予以说明；重点探讨航天光学采样成像系统MTF的优化设计与MTFC问题，并给出讨论结果。     

自适应天线互耦影响研究

用等效网络法推导了考虑互耦影响时阵列的输出信号解析式和信噪比,仿真了不同阵元间距时,自适应直线阵的方向图和输出信噪比,得到了一些有用的结论。     

有关压力传感器可靠性设计的若干问题

论述压力传感器的研制和应用中的经验教训。着重讨论从任务书要求，工程化设计，到生产过程有关压力信号特征、压力接口以及功能与结构相关性，功能与材料相关性等问题。