Analysis of Fast Variations in Electron Fluxes in the Gap Region Using the Normalized Range Method Based on Measurement Data on the SiriusSat-1 Satellite

Cosmic Research - The use of the normalized range method for an analysis of the fast variability of electron fluxes in near-Earth space is proposed. This method makes it possible to conclude...     

On detection using filter banks and higher order statistics

We suggest a method, based on the use of filter bank and higher order statistics (cumulants), for detection of transient signals. The method first uses a bandpass filter bank, which separates the spectrum of the observed signal into narrow frequency bands. Each subfilter of the filter bank is then followed by a cumulant estimator, and thereby suppressing colored noise. By selecting those subfilters that have large output energies, the filter bank can approximate the behavior of a matched filter. Moreover, no a priori information about the waveform of the signal is needed. The performance of the detector is evaluated by using a simulated signal as well as a measured signal. The presented detector is compared with the optimal matched filter detector.     

Self-Adapting dc Converter for Solar Spacecraft Power Supply Selbstanpassender Gleichstromwandler für die Energieversorgung eines Sonnensatelliten

The voltage-current characteristic of solar cells that provide power for a spacecraft can vary over a wide range. For maximum power transfer from the solar cells to the battery system a power converter has to be designed that adjusts its input impedance to a value equal to the output impedance determined by the operating power characteristic of the solar cells. This paper discusses a circuit and calculations for a design to match this condition. The proposed power converter is simple, lightweight, and reliable and will be used in the Sunblazer satellite.     

A few metrological aspects of the Gaia mission

The ESA space astrometry mission Gaia is designed to measure the positions, parallaxes and proper motions of more than one billion stars of our Galaxy brighter than 20 magnitude. The expected astrometric accuracies are in the range 7–25 μas for the point-like sources down to 15 mag. To achieve this staggering performance, several issues of highly accurate metrology must be solved and implemented on the spacecraft. In this paper, I discuss first some constraining principles to perform global astrometry in space, and then a couple of examples of the metrological issues currently faced by the design or to be encountered during the operations. One concerns the optimisation of the sky coverage with a scanning instrument like Gaia, and the other deals with the instrument stability and how the stringent requirements are met in practice.     

General Relativity Accuracy Test (GReAT): New configuration for the differential accelerometer

We presents the results of an activity concerning the test of the Einstein Weak Equivalence Principle with an accuracy of about 5 × 10⁻¹⁵. The experiment will be performed in an “Einstein elevator” using a differential accelerometer with a final sensitivity of about 10⁻¹⁴ g_⊕/Hz^1/2. The differential accelerometer is spun about an horizontal axis at a frequency in the range 0.5–1 Hz in order to modulate, during the free fall, the signal from a possible violation of the Equivalence Principle. In the paper the perturbing effects with the same signature of the possible violation are analyzed and constrained. The experimental results obtained in the laboratory with a first prototype of the differential accelerometer are discussed, comparing this results with those obtained using a new prototype.     

Observations of auroral kilometric radio emission on the <Emphasis Type="Italic">Interball-1</Emphasis> satellite in the active Sun period 1999–2000

Results of almost two years (January 1999–October 2000) of continuous observations of auroral kilometric radio emission with the instrument AKR-X onboard the high-apogee satellite of the Earth Interball-1 are presented. The observations were conducted at the growth stage (in 1999) and in the maximum (2000) of solar activity within the 100–1500 kHz frequency band. The results of AKR detection in the vicinity of the maximum of its spectrum at a frequency of 252 kHz are presented. Both similarity (for example, the character of global directivity) and important differences from the AKR emission observed during the solar activity minimum [5] are found. Together with very high sporadicity, strong seasonal changes in the intensity are typical for the emission. It is completely absent in the spring-summer period in the Northern Hemisphere and is strongly suppressed in this period in the Southern Hemisphere. Probable nature of these features of AKR is discussed.     

HORACE: A compact cold atom clock for Galileo

HORACE (HOrloge à Refroidissement d’Atomes en Cellule = clock based on atoms cooled from vapour cell) is a compact cold caesium atom clock developed in SYRTE at Paris Observatory. This clock can operate both on ground and in microgravity environment. Design of HORACE is based on isotropic light cooling, allowing performing the whole clock sequence (cooling, atomic preparation, Ramsey interrogation and detection) at the same place. Compared to more conventional cold atom clocks such as atomic fountains, the use of isotropic light cooling simplifies both the optical part of the setup and the detection sequence, and leads to a drastic size reduction of the physics package. Very good short-term performances have been demonstrated at SYRTE since relative frequency instability of 2.2 × 10⁻¹³ τ^−1/2 has been obtained. Optimization of the long term stability is still under progress and current results show relative frequency instability around 3 × 10⁻¹⁵ in 10⁴ s of integration. With these performances, HORACE appears as a good candidate both for Galileo’s ground segment clock and for onboard Galileo clock.     

Optical oxygen sensor instrumentation based on the detection of luminescence lifetime.

Optical oxygen sensors are mainly based on the principle of luminescence quenching. In contrast to arready existing intensity-based systems, the measurement of the luminescence lifetime provides certain advantages, such as insensitivity to photobleaching or leaching of the dye, or changes in the intensity of excitation light. This facilitates the use of simple optical systems or optical fibres. A new family of oxygen-sensitive dyes, the porphyrin-ketones, has been introduced, which exhibits favorable spectral properties and decay times in the order of tens and hundreds of microseconds. This allows the use of simple optoelectronic circuitry and low-cost processing electronics. An optical oxygen sensor module has been developed with the dimensions of only 120 x 60 x 30 mm. The prototype is based on the measurement of the decay time of the luminophore by measuring the phase shift between the square-wave excitation and the detected square-wave of the emission coming from the sensor. The instrument is based on semiconductor devices (light-emitting diodes, photodiodes) and may be used for the detection of oxygen in gaseous or liquid samples. The measurement range of the device is from 0 to 200 hPa oxygen partial pressure with a resolution of < 1 hPa over the whole measurement range. The overall measurement accuracy of < +/- 1 hPa has been obtained for periods of 24 h of continuous measurement in a thermostatted environment. The sensor response times t90 are typically < 1 s for gases and 0.5 to 5 min for liquid samples.     

Theoretical and experimental study of a method for the protection of spacecraft from high–speed particles

In this paper, we perform numerical simulation and experimental determination of the limiting resistance of the spacecraft design elements used when developing anti-meteorite protection of spacecraft as well as protection against space debris. One possible way to increase the efficiency of protective shields and satisfy the requirements of the mass characteristics of the latter is the use of mesh barriers.