3D Coronal structures and their evolutions measured by Stereoscopy,consequences for Space Weather and the STEREO mission

We are discussing methods of stereoscopic 3D reconstruction of coronal loops structures. In our most sophisticated method we fit loops observed with SOHO/EIT to a set of shape parameters including the internal twist of the loops field lines. We define this twist as the number of turns of the field line around a torus axis between the footpoints of the loops. Twist numbers of the order 0–2 are observed. We observe the emergence of an Active Region with twisted loops which detwist as they expand. The same correlation between detwisting and expansion is observed with filaments in relation to CME formations. On longer time scale, loops seem to accumulate twist, perhaps due to differential rotation. Rapid losses of twist temporarily correlate with flares. From our analysis, we expect that the internal twist of coronal structures will play an important role for the space weather forecast. This revised version was published online in August 2006 with corrections to the Cover Date.     

Huygens Probe Aerosol Collector Pyrolyser Experiment

ACP's main objective is the chemical analysis of the aerosols in Titan's atmosphere. For this purpose, it will sample the aerosols during descent and prepare the collected matter (by evaporation, pyrolysis and gas products transfer) for analysis by the Huygens Gas Chromatograph Mass Spectrometer (GCMS). A sampling system is required for sampling the aerosols in the 135'32 km and 22'17 km altitude regions of Titan's atmosphere. A pump unit is used to force the gas flow through a filter. In its sampling position, the filter front face extends a few mm beyond the inlet tube. The oven is a pyrolysis furnace where a heating element can heat the filter and hence the sampled aerosols to 250 °C or 600 °C. The oven contains the filter, which has a thimble-like shape (height 28 mm). For transferring effluent gas and pyrolysis products to GCMS, the carrier gas is a labeled nitrogen ¹⁵N₂, to avoid unwanted secondary reactions with Titan's atmospheric nitrogen. Aeraulic tests under cold temperature conditions were conducted by using a cold gas test system developed by ONERA. The objective of the test was to demonstrate the functional ability of the instrument during the descent of the probe and to understand its thermal behavior, that is to test the performance of all its components, pump unit and mechanisms. In order to validate ACP's scientific performance, pyrolysis tests were conducted at LISA on solid phase material synthesized from experimental simulation. The chromatogram obtained by GCMS analysis shows many organic compounds. Some GC peaks appear clearly from the total mass spectra, with specific ions well identified thanks to the very high sensitivity of the mass spectrometer. The program selected for calibrating the flight model is directly linked to the GCMS calibration plan. In order not to pollute the two flight models with products of solid samples such as tholins, we excluded any direct pyrolysis tests through the ACP oven during the first phase of the calibration. Post probe descent simulation of flight results are planned, using the much representative GCMS and ACP spare models. This revised version was published online in August 2006 with corrections to the Cover Date.     

High resolution time profile of decimetric type-III bursts

Type-III bursts are signatures of the electron beams accelerated during the solar flares, their observation and investigation provide information of the acceleration processes, the characteristics of the exciting agent and the acceleration site. The Brazilian Solar Spectroscope (BSS), in operation at INPE, Brazil, have recorded type-III radio bursts in decimetric range (2050–2250 MHz) with high time resolution of 20 ms. Decimetric reverse drift bursts are possibly generated in a dense loop by electron beams travelling towards the photosphere. Hence their time profiles should carry signatures of the density inhomogenities in the loop. Here the temporal and spectral characteristics of decimetric type-III bursts are presented.     

The INFRARED SPACE OBSERVATORY (ISO)

The INFRARED SPACE OBSERVATORY (ISO), a project of the European Space Agency (ESA), will make various astronomical observations in the wavelength range of 2 to 200 μm. Two-thirds of its observing time will be available to guest observers via the traditional route of proposal submission. ISO will be launched in 1995 by an Ariane 4 from Kourou (Guyana) and be brought into a very elongated orbit with a 24hr period of which 16 hr can be used for astronomical observations. The payload module is essentially a large cryostat with a tank that will be filled with over 2000 litres of superfluid helium to keep the instruments cold (2 to 4 K) during an expected lifetime of 18 months. Inside the dewar, there is a Ritchey-Chretien telescope with a primary mirror of diameter 60cm. Four instruments, each provided by a different PI consortium, share the ISO focal plane. These instruments are : a photometer, a camera and two spectrometers — one for the wavelength range 2–45 μm and the other for 45–180 μm.     

Ionospheric wave processes during HF heating experiments

Effects of ionospheric modification produced by powerful high frequency radio waves are studied using the method of field-aligned scattering of diagnostic HF radio signals. Observations of scattered HF signals have been made by the Doppler spectrum method. Analysis of the experimental data shows the appearance of quasiperiodic variations in Doppler frequency shift f_d, with periods 30–60 s during the heating cycles. Powerful HF waves are assumed to excite the Alfvén resonator generating oscillations of the magnetic field lines in the heated region and giving rise to f_d artificial variations and magnetic pulsations. In the case of continuous action of the powerful HF transmitter ionospheric waves are sometimes observed with periods 12–25 min, typical of medium-scale travelling ionospheric disturbances.     

Repair of DNA double-strand breaks and cell killing by charged particles.

It has been suggested that it is not simple double-strand breaks (dsb) but the non-reparable breaks which correlate well with the high biological effectiveness of high LET radiations for cell killing (Kelland et al., 1988; Radford, 1986). We have compared the effects of charged particles on cell death in 3 pairs of cell lines which are normal or defective in the repair of DNA dsbs. For the cell lines SL3-147, M10, and SX10 which are deficient in DNA dsb repair, RBE values were close to unity for cell killing induced by charged particles with linear energy transfer (LET) up to 200 keV/micrometer and were even smaller than unity for the LET region greater than 300 keV/micrometer. The inactivation cross section (ICS) increased with LET for all 3 pairs. The ICS of dsb repair deficient mutants was always larger than that of their parents for all the LET ranges, but with increasing LET the difference in ICS between the mutant and its parent became smaller. Since a small difference in ICS remained at LET of about 300 keV/micrometer, dsb repair may still take place at this high LET, even if its role is apparently small. These results suggest that the DNA repair system does not play a major role in protection against the attack of high LET radiations and that a main muse of cell death is non-reparable dsb which are produced at a higher yield compared with low LET radiations. No correlation was observed between DNA content or nuclear area and ICS.     

DORIS geodesy: A dynamic determination of geocentre location

Geoscience Australia contributed a multi-satellite, multi-year weekly time series to the International DORIS Service combined submission for the construction of International Terrestrial Reference Frame 2008 (ITRF2008). This contributing solution was extended to a study of the capability of DORIS to dynamically estimate the variation in the geocentre location. Two solutions, comprising different constraint configurations of the tracking network, were undertaken. The respective DORIS satellite orbit solutions (SPOT-2, SPOT-4, SPOT-5 and Envisat) were verified and validated by comparison with those produced at the Goddard Space Flight Center (GSFC), DORIS Analysis Centre, for computational consistency and standards. In addition, in the case of Envisat, the trajectories from the GA determined SLR and DORIS orbits were compared. The results for weekly dynamic geocentre estimates from the two constraint configurations were benchmarked against the geometric geocentre estimates from the IDS-2 combined solution. This established that DORIS is capable of determining the dynamic geocentre variation by estimating the degree one spherical harmonic coefficients of the Earth’s gravity potential. It was established that constrained configurations produced similar results for the geocentre location and consequently similar annual amplitudes. For the minimally constrained configuration Greenbelt–Kitab, the mean of the uncertainties of the geocentre location were 2.3, 2.3 and 7.6 mm and RMS of the mean uncertainties were 1.9, 1.2 and 3.5 mm for the X, Y and Z components, respectively. For GA_IDS-2_Datum constrained configuration, the mean of the uncertainties of the geocentre location were 1.7, 1.7 and 6.2 mm and RMS of the mean uncertainties were 0.9, 0.7 and 2.9 mm for the X, Y and Z components, respectively. The mean of the differences of the two DORIS dynamic geocentre solutions with respect to the IDS-2 combination were 1.6, 4.0 and 5.1 mm with an RMS of the mean 21.2, 14.0 and 31.5 mm for the Greenbelt–Kitab configuration and 4.1, 3.9 and 4.3 mm with an RMS 8.1, 9.0 and 28.6 mm for the GA_IDS-2_Datum constraint configuration. The annual amplitudes for each component were estimated to be 5.3, 10.8 and 11.0 mm for the Greenbelt–Kitab configuration and 5.3, 9.3 and 9.4 mm for the GA_IDS-2_Datum constraint configuration. The two DORIS determined dynamic geocentre solutions were compared to the SLR determined dynamic solution (which was determined from the same process of the GA contribution to the ITRF2008 ILRS combination) gave mean differences of 3.3, −4.7 and 2.5 mm with an RMS of 20.7, 17.5 and 28.0 mm for the X, Y and Z components, respectively for the Greenbelt–Kitab configuration and 1.1, −5.4 and 4.4 mm with an RMS of 9.7, 13.3 and 24.9 mm for the GA_IDS-2_Datum configuration. The larger variability is reflected in the respective amplitudes. As a comparison, the annual amplitudes of the SLR determined dynamic geocentre are 0.9, 1.0 and 6.8 mm in the X, Y and Z components. The results from this study indicate that there is potential to achieve precise dynamically determined geocentre from DORIS.     

Induced abnormality in Mir- and Earth grown Super Dwarf wheat.

Super-dwarf wheat grown on the Mir space station using the Svet "Greenhouse" exhibited morphological, metabolic and reproductive abnormalities compared with Earth-grown wheat. Of prominent importance were the abnormalities associated with reproductive ontogeny and the total absence of seed formation on Mir. Changes in the apical meristem associated with transition from the vegetative phase to floral initiation and development of the reproductive spike were all typical of 'Super-Dwarf' wheat up to the point of anthesis. Observation of ruptured anthers from the Mir-grown plants revealed what appeared to be normally developed pollen. These pollen gains, however, contained only one nuclei, while normal viable pollen is tri-nucleate. A potentially important difference in the flight experiment, compared with ground reference studies, was the presence of a high level of atmospheric ethylene (1,200 ppb). Ground studies conducted by exposing 'Super-Dwarf' wheat to ethylene just prior to anthesis resulted in manifestation of the same abnormalities observed in the space flight samples.     

Multibaseline ATI-SAR for robust ocean surface velocity estimation

An open problem of along-track interferometry (ATI) for synthetic aperture radar (SAR) sensing of ocean surface currents is the need of ancillary wind information for inversion of Doppler centroid measurements, that have to be compensated for the propagation velocity of advancing and/or receding Bragg scatterers. We propose three classes of estimators which exploit multibaseline (MB) ATI acquisition and Doppler resolution for robust data inversion under different degrees of a priori information about the wind direction and the value of the characteristic Bragg frequency. Performance analysis and comparison with conventional ATI show that the proposed MB estimators can produce accurate velocity estimates in the absence of detailed ancillary data.     

Numerical simulation of effects of the August 11, 1999 solar eclipse in the outer ionosphere

The results of a numerical simulation of such parameters of the topside ionosphere as concentration N _e and temperature T _e of electrons, and concentration n(H⁺) and fluxes along the magnetic field lines Φ(H⁺) of H⁺ ions at an altitude of ～2000 km for the conditions of the August 11, 1999 solar eclipse are presented. The calculations were performed using the Global Self-consistent Model of the Thermosphere, Ionosphere, and Protonosphere of the Earth (GSM TIP). It is shown that during the eclipse, in addition to a region of decreased values of T _e in the Northern Hemisphere and in the magnetically conjugate region in the Southern Hemisphere, regions of electron heating emerge in both hemispheres. Simultaneously, an extended region of decreased values of N _e comes into existence and moves behind the Moon’s shadow. Regions with decreased (down to ～30%) and enhanced (up to ～50%) concentrations of H⁺ ions are detected in the global distribution of these ions.