Locations of Atmospheric Photoelectron Energy Peaks Within the Mars Environment

By identifying peaks in the photoelectron spectrum produced by photoionization of CO₂ in the Martian atmosphere, we have conducted a pilot study to determine the locations of these photoelectrons in the space around Mars. The significant result of this study is that these photoelectrons populate a region around Mars bounded externally by the magnetic pileup boundary, and internally by the lowest altitude of our measurements (∼250 km) on the dayside and by a cylinder of approximately the planetary radius on the nightside. It is particularly noteworthy that the photoelectrons on the nightside are observed from the terminator plane tailward to a distance of ∼3 R _M, the Mars Express apoapsis. The presence of the atmospherically generated photoelectrons on the nightside of Mars may be explained by direct magnetic field line connection between the nightside observation locations and the Martian dayside ionosphere. Thus the characteristic photoelectron peaks may be used as tracers of magnetic field lines for the study of the magnetic field configuration and particle transport in the Martian environment.     

The Solar Energetic Particle Ionic Charge Analyzer (SEPICA) and the Data Processing Unit (S3DPU) for SWICS,SWIMS and SEPICA

The Solar Energetic Particle Ionic Charge Analyzer (SEPICA) is the main instrument on the Advanced Composition Explorer (ACE) to determine the ionic charge states of solar and interplanetary energetic particles in the energy range from ≈0.2 MeV nucl−1 to ≈5 MeV charge−1. The charge state of energetic ions contains key information to unravel source temperatures, acceleration, fractionation and transport processes for these particle populations. SEPICA will have the ability to resolve individual charge states and have a substantially larger geometric factor than its predecessor ULEZEQ on ISEE-1 and -3, on which SEPICA is based. To achieve these two requirements at the same time, SEPICA is composed of one high-charge resolution sensor section and two low- charge resolution, but large geometric factor sections. The charge resolution is achieved by the focusing of the incoming ions, through a multi-slit mechanical collimator, deflection in an electrostatic analyzer with a voltage up to 30 kV, and measurement of the impact position in the detector system. To determine the nuclear charge (element) and energy of the incoming ions, the combination of thin-window flow-through proportional counters with isobutane as counter gas and ion-implanted solid state detectors provide for 3 independent ΔE (energy loss) versus E (residual energy) telescopes. The multi-wire proportional counter simultaneously determines the energy loss ΔE and the impact position of the ions. Suppression of background from penetrating cosmic radiation is provided by an anti-coincidence system with a CsI scintillator and Si-photodiodes. The data are compressed and formatted in a data processing unit (S3DPU) that also handles the commanding and various automatted functions of the instrument. The S3DPU is shared with the Solar Wind Ion Charge Spectrometer (SWICS) and the Solar Wind Ion Mass Spectrometer (SWIMS) and thus provides the same services for three of the ACE instruments. It has evolved out of a long family of data processing units for particle spectrometers. This revised version was published online in June 2006 with corrections to the Cover Date.     

The Solar Electron and Proton Telescope for the STEREO Mission

The Solar Electron and Proton Telescope (SEPT), one of four instruments of the Solar Energetic Particle (SEP) suite for the IMPACT investigation, is designed to provide the three-dimensional distribution of energetic electrons and protons with good energy and time resolution. This knowledge is essential for characterizing the dynamic behaviour of CME associated and solar flare associated events. SEPT consists of two dual double-ended magnet/foil particle telescopes which cleanly separate and measure electrons in the energy range from 30–400 keV and protons from 60–7?000 keV. Anisotropy information on a non-spinning spacecraft is provided by the two separate telescopes: SEPT-E looking in the ecliptic plane along the Parker spiral magnetic field both towards and away from the Sun, and SEPT-NS looking vertical to the ecliptic plane towards North and South. The dual set-up refers to two adjacent sensor apertures for each of the four view directions: one for protons, one for electrons. The double-ended set-up refers to the detector stack with view cones in two opposite directions: one side (electron side) is covered by a thin foil, the other side (proton side) is surrounded by a magnet. The thin foil leaves the electron spectrum essentially unchanged but stops low energy protons. The magnet sweeps away electrons but lets ions pass. The total geometry factor for electrons and protons is 0.52 cm²?sr and 0.68 cm²?sr, respectively. This paper describes the design and calibration of SEPT as well as the scientific objectives that the instrument will address.     

RPC-LAP: The Rosetta Langmuir Probe Instrument

The Rosetta dual Langmuir probe instrument, LAP, utilizes the multiple powers of a pair of spherical Langmuir probes for measurements of basic plasma parameters with the aim of providing detailed knowledge of the outgassing, ionization, and subsequent plasma processes around the Rosetta target comet. The fundamental plasma properties to be studied are the plasma density, the electron temperature, and the plasma flow velocity. However, study of electric fields up to 8 kHz, plasma density fluctuations, spacecraft potential, integrated UV flux, and dust impacts is also possible. LAP is fully integrated in the Rosetta Plasma Consortium (RPC), the instruments of which together provide a comprehensive characterization of the cometary plasma. The LAP Team is listed in Table III.     

Metallic and Oxidized Aluminum Debris Impacting the Trailing Edge of the Long Duration Exposure Facility (LDEF)

A total of 87 microcraters >30 m in diameter that were found in gold substrates exposed on the trailing edge of the non-spinning Long Duration Exposure Facility (LDEF) yielded analyzable projectile residues in their interiors. Using qualitative SEM-EDS analysis methods, some 60 of these craters were formed by natural cosmic-dust particles, while 27 residues (31%) were assigned to orbital debris (Hörz et al., 1993). The far majority of the orbital-debris impacts, 24 (89%) of the 27 events, contained only aluminum in their X-ray spectra. The present study evaluates these aluminum-rich residues in detail and employs a windowless X-ray detector, which permits for the analysis of low-Z elements and specifically of oxygen. This makes it possible to discriminate between oxidized (Al₂O₃) and metallic (Al) projectiles from dramatically different sources, the former produced during solid-fuel rocket firings, the latter resulting from explosively or collisionally disrupted spacecraft.Of the 24 craters analyzed with the windowless detector, 13 (54%) contained Al₂O₃ and 11 (46%) yielded structurally disintegrated Al metal. The oxidized residues preferentially occur in the smaller craters, all <60 m in diameter. Corresponding particles on LDEF's trailing edge are <35 m in diameter. Some 70% of this particle population is composed of Al₂O₃. Although solid-fuel rocket exhaust products are typically <5 m in size, they tend to coagulate into crusts at the rocket nozzle to be shed occasionally as relatively large, aggregate particles. Structurally disintegrated, metallic fragments compose one-third of all particles <35 m, but they dominate all particles >35 m, and thus all craters >60 m. These findings clearly establish that solid-rocket exhaust particles, as well as explosively or collisionally produced debris, exist in low-inclination, high-eccentricity orbits in sufficient quantities that they must be accounted for in models describing the present and future orbital-debris population at typical Shuttle and Space Station altitudes.     

Adsorption water-related potential chemical and biological processes in the upper martian surface

Mars Odyssey has given strong evidence for the existence of water in the upper martian surface at equatorial latitudes. The water content, which corresponds to the hydrogen in the soil, can regionally reach values up to about 15%. This water is mainly in the form of structurally and partially irreversibly bound "crystal" water, and of reversibly bound and partially unfrozen adsorption water. This adsorption water, which has "liquid-like" properties as a two dimensional fluid or film, can trigger-in the presence of ultraviolet light and in concentrations similar to what has been measured on Mars-photocatalytic processes that are important for martian surface chemistry. The consequences of the diurnally variable presence of adsorption water on the chemistry and hypothetical biological processes at and in the upper martian surface at equatorial and mid-latitudes are discussed in terms of water-related environmental aspects for chemical and hypothetical life processes on Mars.     

The acquisition of survey knowledge for local and global landmark configurations under time pressure

The influence of stress states on cognition is widely recognized. However, the manner in which stress affects survey knowledge acquisition is still unresolved. For the present study, we investigated whether survey knowledge acquisition during a stressful task (i.e., under time pressure) is more accurate for the mental representation of global or local landmarks. Participants navigated through virtual cities with a navigation aid and explicit learning instructions for different landmark configurations. Participants’ judgments of relative direction (JRDs) suggest that global landmark configurations were not represented more accurately than local landmark configurations and that survey knowledge acquisition was not impaired under time pressure. In contrast to prior findings, our results indicate the limitations of the utility of global landmarks for spatial knowledge acquisition.     

Ages and Geologic Histories of Martian Meteorites

We review the radiometric ages of the 16 currently known Martian meteorites, classified as 11 shergottites (8 basaltic and 3 lherzolitic), 3 nakhlites (clinopyroxenites), Chassigny (a dunite), and the orthopyroxenite ALH84001. The basaltic shergottites represent surface lava flows, the others magmas that solidified at depth. Shock effects correlate with these compositional types, and, in each case, they can be attributed to a single shock event, most likely the meteorite's ejection from Mars. Peak pressures in the range 15 – 45 GPa appear to be a "launch window": shergottites experienced ～30 – 45 GPa, nakhlites ～20 ± 5 GPa, Chassigny ～35 GPa, and ALH84001 ～35 – 40 GPa. Two meteorites, lherzolitic shergottite Y-793605 and orthopyroxenite ALH84001, are monomict breccias, indicating a two-phase shock history in toto: monomict brecciation at depth in a first impact and later shock metamorphism in a second impact, probably the ejection event. Crystallization ages of shergottites show only two pronounced groups designated S₁ (～175 Myr), including 4 of 6 dated basalts and all 3 lherzolites, and S₂ (330 – 475 Myr), including two basaltic shergottites and probably a third according to preliminary data. Ejection ages of shergottites, defined as the sum of their cosmic ray exposure ages and their terrestrial residence ages, range from the oldest (～20 Myr) to the youngest (～0.7 Myr) values for Martian meteorites. Five groups are distinguished and designated S_Dho (one basalt, ～20 Myr), S_L (two lherzolites of overlapping ejection ages, 3.94 ± 0.40 Myr and 4.70 ± 0.50 Myr), S (four basalts and one lherzolite, ～2.7 – 3.1 Myr), S_DaG (two basalts, ～1.25 Myr), and S_E (the youngest basalt, 0.73 ± 0.15 Myr). Consequently, crystallization age group S₁ includes ejection age groups S_L, S_E and 4 of the 5 members of S, whereas S₂ includes the remaining member of S and one of the two members of S_DaG. Shock effects are different for basalts and lherzolites in group S/S₁. Similarities to the dated meteorite DaG476 suggest that the two shergottites that are not dated yet belong to group S₂. Whether or not S₂ is a single group is unclear at present. If crystallization age group S₁ represents a single ejection event, pre-exposure on the Martian surface is required to account for ejection ages of S_L that are greater than ejection ages of S, whereas secondary breakup in space is required to account for ejection ages of S_E less than those of S. Because one member of crystallization age group S₂ belongs to ejection group S, the maximum number of shergottite ejection events is 6, whereas the minimum number is 2. Crystallization ages of nakhlites and Chassigny are concordant at ～1.3 Gyr. These meteorites also have concordant ejection ages, i.e., they were ejected together in a single event (NC). Shock effects vary within group NC between the nakhlites and Chassigny. The orthopyroxenite ALH84001 is characterized by the oldest crystallization age of ～4.5 Gyr. Its secondary carbonates are ～3.9 Gyr old, an age corresponding to the time of Ar-outgassing from silicates. Carbonate formation appears to have coincided with impact metamorphism, either directly, or indirectly, perhaps via precipitation from a transient impact crater lake. The crystallization age and the ejection age of ALH84001, the second oldest ejection age at 15.0 ± 0.8 Myr, give evidence for another ejection event (O). Consequently, the total number of ejection events for the 16 Martian meteorites lies in the range 4 – 8. The Martian meteorites indicate that Martian magmatism has been active over most of Martian geologic history, in agreement with the inferred very young ages of flood basalt flows observed in Elysium and Amazonis Planitia with the Mars Orbital Camera (MOC) on the Mars Global Surveyor (MGS). The provenance of the youngest meteorites must be found among the youngest volcanic surfaces on Mars, i.e., in the Tharsis, Amazonis, and Elysium regions.     

Structural assessment of a solid propellant rocket motor: Effects of aging and damage

The aim of this study is to perform structural analysis of a solid propellant rocket motor using the finite element method and to determine the effects of aging on the analysis results. Thermal and pressure loadings occurring during the shipping, storing and firing are considered to be the most critical in determining long-term behavior of the motor. Stress and strain distribution in the rocket motor under these loading conditions are determined. Maximum hoop strain at the surface of the propellant and bond stresses at the interface between the liner and the insulator are evaluated as indicators of cracking in the propellant grain and debonding at the liner–insulator interface. The analyses are performed for both unaged and aged propellants. The results can be used to estimate the service life of the motor.