航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

一种改进的区域覆盖星座优化设计方法

为缩短区域覆盖星座优化设计的计算时间，对网格点仿真法进行了改进。在统计时间内，以解析法计算卫星覆盖时刻集，并采用遗传算法优化星座参数。仿真计算结果表明，本文改进方法的计算时间仅为优化前的百分之一。     

利用超导磁体模拟失重环境

介绍了利用超导磁体产生的强磁场获得的失重环境及在此基础上的一些相关科学研究。超导磁体产生的大梯度强磁场可在地面长时间的模拟失重环境,为在地面进行空间科学研究提供了一个可选择的途径。实践证明,利用超导磁体产生强磁场模拟失重环境是一种值得重视的新技术。     

基于iSIGHT的磁悬浮反作用飞轮优化设计

针对一种额定角动量为15Nms的磁悬浮反作用飞轮,分析了系统的控制模型,得知若飞轮转子质心位于上下径向磁轴承几何对称中心,可以减少控制参数的耦合,简化控制器设计。基于此分析结论,以优化设计软件iSIGHT为平台,对15Nms的磁悬浮反作用飞轮进行了多学科优化设计方法研究,改进了原有的优化设计方法,设计结果表明:在保证多约束条件下使转子质量达到最小,同时降低控制系统调试和检测的难度。此优化方法进一步提高了飞轮的设计和调试效率,有助于实现系统的高精度控制。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

粗差拟准检定法在星载GPS低轨卫星定轨中的应用

利用自适应卡尔曼滤波进行星载GPS低轨卫星定轨时,必须解决量测方程中经常存在的粗差问题．在分析以往方法的优缺点后,用拟准检定法来探测和修正量测方程中存在的粗差．该法的优点是辨识粗差准确率高,能同时定位多个粗差．另外,为了克服星载GPS低轨卫星定轨的滤波器可能出现的数值不稳定性及发散现象,还采用了UD分解算法及Sage自适应滤波器．最后用一个CHAMP卫星的模拟算例验证本方法的可行性和有效性．