Influence of Trapped Plasma on the Structure of Collisionless Thin Current Sheets

Using both analytical and numerical models of the collisionless anisotropic current sheet generated by the impinging flows of transient ions, we have studied the self-consistent solutions taking the plasma trapped in the sheet into account. It is demonstrated that there exists a limited window in the space of system parameters where self-consistent solutions can exist. When the density of the quasi-trapped plasma is sufficiently large, a redistribution of the total current can be a cause of the sheet decay, when the local current of the trapped particles compensate (totally or in part) the main current in the center and at the edges of the sheet, while the total current generated by ions on the trapped trajectories vanishes.     

Using the PROGRESS transport spacecraft in structure of the International Space Station for realization of scientific experiments under microgravity conditions

The problem is considered of using the PROGRESS transport spacecraft, which will deliver the payload on the ISS, as a free flying platform for realization of space experiments. For maintenance of the ISS 5-6 PROGRESS flights per year are planned. Usually after delivery of the payload the PROGRESS undocks from the ISS and burns down in the Earth atmosphere. However, the operating conditions of its onboard systems allow to prolong operation and to make free flight near to the station and repeatedly to be docked to it. It is offered to use this possibility for performing experiments on Material Science.     

有源磁悬浮动态特性的测试与辨识

惯性仪表有源磁悬浮的动态特性实质上反映着其浮子组件五个自由度的动力学规律。针对时分式有源磁悬浮动态特性测试在工程实现上的具体困难， 基于多输入多输出（ Ｍ Ｉ Ｍ Ｏ） 系统的测试和辨识原理， 采用时分信号激励和近似的时序同步数据采集方法， 进行了磁悬浮各回路的时域测试和辨识， 结果表明， 开环状态下的浮子运动有一定交叉耦合关系， 在有源磁悬浮设计和调试中应当加以考虑。同时分析了辨识的可行性和可信度。     

SPACEBUS3000卫星平台及其测控系统

介绍了法国宇航公司ＡＥＲＯＳＰＡＴＩＡＬＥ研制的通信卫星平台ＳＰＡＣＥＢＵＳ３０００的主要电子系统结构和功能，着重介绍了它的测控系统部分，包括数管子系统和射频子系统的详细结构和功能划分，以及它们的设计方案。     

RLV economics: fiscal evaluation of NASA''s reusable launch vehicle effort

The US RLV program aims to stimulate commercial development of a next-generation heavy-lift launcher and lower launch costs by one order of magnitude from the Space Shuttle. This paper discusses the incentives needed to encourage private investment — income tax relief, investment mitigation, financing assistance — in the venture and uses a specifically developed case study model to evaluate their effectiveness. It finds that an R&D tax credit would be the most practical incentive. Directions for future work are provided.     

固体发动机药柱粘结试件的三维应力分析

推进剂／衬层／绝热层矩形粘结试件已作为随发动机测试试件，用于监控药柱最薄弱的推进剂／衬层界面粘结质量。由于试件较厚，又材料具有粘弹特性，因此应对它进行三维粘弹性有限元分析。本文分析了推进剂／衬层界面附近的应力分布情况，并给出试件启裂点有效应力与拉伸平均应力之比的集中系数，供药柱结构完整性分析人员使用     

光纤加速度传感器

介绍开环和闭环两种光纤加速度传感器的特点、工作原理和结构简图，论述了温度对开环光纤加速度计的影响，以及解决此影响的方法，并给出了消除温度漂移误差的系统框图。     

定速拉伸的固体推进剂双轴板条的应力分析

对固体推进剂双轴板条试件进行了有限元分析，并考虑了粘弹性对应力结果的影响，分析结果表明，双轴板条试件中心域为平面应变状态，与发动机药柱中部内孔表面相似，并给出了计算杨氏模量所需的修正系数。     

刚弹性复杂系统在重力场中的定点转动

本文研究了轴对称刚－弹系统在重力场中的定点运动。首先利用模态分析方法将偏微分方程转化为常微分方程组，然后引进小参数将藕合的长周期运动和短周期运动分离。得到了这个非线性刚弹藉合系统的一次近似解，并利用它研究了刚－弹系统运动特性。     

Bubble detector characterization for space radiation

In light of the importance of the neutron contribution to the dose equivalent received by space workers in the near-Earth radiation environment, there is an increasing need for a personal dosimeter that is passive in nature and able to respond to this neutron field in real time. Recent Canadian technology has led to the development of a bubble detector, which is sensitive to neutrons, but insensitive to low linear energy transfer (LET) radiation. By changing the composition of the bubble detector fluid (or “superheat”), the detectors can be fabricated to respond to different types of radiation. This paper describes a preliminary ground-based research effort to better characterize the bubble detectors of different compositions at various charged-particle accelerator facilities, which are capable of simulating the space radiation field.