Monitoring the thermal condition of permanent-magnet synchronousmotors

This paper describes a novel approach to monitoring the condition of small permanent-magnet synchronous motors (PMSM) operating under thermal stress. The approach begins with the estimation of temperature-dependent motor parameters from measurements of line voltages and currents. The parameters are then used to derive estimates of motor temperatures. Next, the electrically estimated temperatures are combined with a surface measurement of motor temperature and a dynamic thermal model of the motor to yield an observer that is a Kalman filter. The temperatures estimated by the observer are used for failure prevention. Finally, by modifying the observer, it is tuned to use the geometric properties of its innovation for failure detection. The innovation, that is, the difference between the thermally and electrically estimated temperatures, is monitored and compared against appropriate thresholds to detect failures. Failure detection is demonstrated experimentally, and shown to be capable of distinguishing the conditions of normal operation, and operation with obstructed cooling     

The local interstellar medium viewed through pickup ions, recent results and future perspectives

Over the last 10 years the experimental basis for the study of the very local interstellar medium (VLISM) has been substantially broadened by the direct detection of pickup ions and of neutral helium. The strength of these methods lies in the local measurement of the particles. By scanning the gravitational focusing cone of the interstellar wind, a consistent set of interstellar helium parameters, neutral density, temperature and relative velocity, has been derived. However, the accuracy of these parameters is still hampered by uncertainties in some of the crucial ionization rates and in the pickup ion transport. Recent observations have shown that the scattering mean free path of pickup ions is comparable with the large scale variation of the interplanetary magnetic field (IMF) in the inner heliosphere. This requires a substantial modification in the modeling of the ion distribution and more detailed measurements, tasks that can be addressed in the near future.     

Forward error correction for radiobeacon broadcast of differentialGPS data

Marine radiobeacon networks are being used to broadcast differential Global Positioning System (DGPS) corrections to marine users. The correction data digitally modulate signals from some of the existing marine radiobeacons, which operate in the 285 to 325 kHz band, creating DGPS/radiobeacons. The corrections improve the accuracy of the GPS fix from 100 m to 5-10 m, and provide position fixing service for many marine applications which are too demanding for the normal GPS service. Forward error correction can be used to improve the reliability or range of the DGPS/radiobeacon signal. The improvements made possible by channel coding are analyzed, and a code for DGPS/radiobeacons is recommended     

Energy storage solutions for premium power

Most utility power quality problems are caused by sags, surges, and momentary outages which last from several cycles to several seconds. Modern loads are very sensitive to these short duration glitches resulting in major losses in revenue through system down-time and loss of product from work in process. Many of these problems are caused by normal transients as equipment and factories go on-line or shut down. Others are caused by lightening strikes and faults on the distribution system. Although power utility companies attempt to minimize the interruptions through filtering and system management, power quality problems continue to cost American industry billions of dollars a year. Batteries have been used for many years in uninterruptible power supplies (UPS) to protect critical loads. However, because many new facilities have a network of broadly distributed critical loads, a UPS on the order of one to several megawatts is needed to support the total plant rather than several small kilowatt installations. This paper reports on the implementation of such a utility scale power quality management system     

Galactic cosmic ray radiation levels in spacecraft on interplanetary missions.

Using the Langley Research Center galactic cosmic ray (GCR) transport computer code (HZETRN) and the computerized anatomical man (CAM) model, crew radiation levels inside manned spacecraft on interplanetary missions are estimated. These radiation-level estimates include particle fluxes, LET (linear energy transfer) spectra, absorbed dose, and dose equivalent within various organs of interest in GCR protection studies. Changes in these radiation levels resulting from the use of various different types of shield materials are presented.     

Solar-proton polar-cap intensity structures as a test of magnetic field models

The entry of energetic solar protons to the polar caps offers an interesting way to test models of the geomagnetic field. In this brief report, we present a comparison between SAMPEX observations of solar-particle intensity structure during a polar cap traversal with numerical trajectory calculations using the IGRF + T96 field model.     

Plasma production by secondary impacts: Implications for velocity measurements by in-situ dust detectors

A number of in-situ cosmic dust detectors derive the dust particle velocities from measurement of the risetimes of the impact plasma signal. Extensive calibration of these instruments has established a reliable empirical relationship but a quantitative explanation has not been available, with the result that confidence in flight data outside the range of the calibration data is hard to assess. Recent measurements taken at the dust accelerator facilities at the University of Kent (UK) and at MPI-K (Germany), supported by a theoretical analysis, have demonstrated that the relationship results from the time-spread of secondary impacts coupled with the mobility of ions in the impact plasma cloud, which is in turn determined by the magnitude and geometry of the applied electric field and on the ion species present. Results of the current investigations are presented, and the implications of measurements based on this principle at high particle velocities, at masses unobtainable in calibration studies, and for other instrument geometries, are considered.     

Fuzzy logic applications to multisensor-multitarget correlation

A consistent tactical picture requires data fusion technology to combine and propagate information received from diverse objects and usually vague situations. The information may be contained in two types of data; numerical data received from sensor measurements, and linguistic data obtained from human operators and domain experts. In real world situations, the numerical data may be noisy, inconsistent, and incomplete, and the linguistic information is imprecise and vague. To deal with these two types of data simultaneously, fuzzy sets and fuzzy logic provide a methodology to obtain an approximate but consistent tactical picture in a timely manner for very complex or ill-defined engineering problems. A functional paradigm for fuzzy data fusion is presented. It consists of four basic elements: (1) fuzzification of crisp elements, (2) fuzzy knowledge base derived from numerical input/output relations and humans, (3) fuzzy inference mechanism based on a class of fuzzy logic, (4) defuzzification of fuzzy outputs into crisp outputs for use by a plant. For real-time practical systems, the on-line determination of a fuzzy membership function from a given set of crisp inputs is vital. To this end, a methodology for estimating an optimal membership function from crisp input data has been implemented. This is based on the possibility/probability consistency principle as proposed by L.A. Zadeh. A relationship between the fuzzy membership function and the confidence level of statistical input data has been developed and it serves as a design parameter for fuzzification. This technique has been applied to a two-dimensional multisensor-multitarget tracking system. Fuzzy system performance evaluations have been presented. With simulated data in the laboratory environment, the simulation has been performed to evaluate the Mission Avionics Sensor Synergism (MASS) Systems. These results show better performance for the data correlation function using the fuzzy logic techniques.     

Evolution of the Martian water cycle.

The current Martian water cycle is extremely asymmetric, with large amounts of vapor subliming off a permanent north polar water ice cap in northern summer, but with no apparent major source of water vapor in the southern hemisphere. Detailed simulations of this process with a three-dimensional circulation model indicate that the summertime interhemispheric exchange (Hadley cell) is very much stronger than transport by eddies in other seasons. As a result, water ice would be distributed globally were it not for the buffering action of regolith soil adsorption which limits the net flux of water vapor off the north polar cap to amounts that are insignificant even on the scale of thousands of years. It has been suggested that the polar layered deposits are the result of exchange on these long time scales, driven by changes in Martian orbital parameters. We therefore are conducting simulations to test the effect of varied orbital parameters on the Martian water cycle. We find that when the perihelion summer pole is charged with a polar water ice cap, large quantities of water are quickly transfered to the aphelion summer pole, setting up an annual cycle that resembles the present one. Thus, the adsorptivity of the Martian regolith may be in the narrow range where it can limit net transport from the aphelion but not the perihelion pole.