Solar-proton polar-cap intensity structures as a test of magnetic field models

The entry of energetic solar protons to the polar caps offers an interesting way to test models of the geomagnetic field. In this brief report, we present a comparison between SAMPEX observations of solar-particle intensity structure during a polar cap traversal with numerical trajectory calculations using the IGRF + T96 field model.     

Evolution of the Martian water cycle.

The current Martian water cycle is extremely asymmetric, with large amounts of vapor subliming off a permanent north polar water ice cap in northern summer, but with no apparent major source of water vapor in the southern hemisphere. Detailed simulations of this process with a three-dimensional circulation model indicate that the summertime interhemispheric exchange (Hadley cell) is very much stronger than transport by eddies in other seasons. As a result, water ice would be distributed globally were it not for the buffering action of regolith soil adsorption which limits the net flux of water vapor off the north polar cap to amounts that are insignificant even on the scale of thousands of years. It has been suggested that the polar layered deposits are the result of exchange on these long time scales, driven by changes in Martian orbital parameters. We therefore are conducting simulations to test the effect of varied orbital parameters on the Martian water cycle. We find that when the perihelion summer pole is charged with a polar water ice cap, large quantities of water are quickly transfered to the aphelion summer pole, setting up an annual cycle that resembles the present one. Thus, the adsorptivity of the Martian regolith may be in the narrow range where it can limit net transport from the aphelion but not the perihelion pole.     

Monte Carlo track structure studies of energy deposition and calculation of initial DSB and RBE.

Estimation of exposure due to environmental and other sources of radiations of high-LET and low-LET is of interest in radiobiology and radiation protection for risk assessment. To account for the differences in effectiveness of different types of radiations various parameters have been used. However, the relative inadequacy of the commonly used parameters, including dose, fluence, linear energy transfer, lineal energy, specific energy and quality factor, has been made manifest by the biological importance of the microscopic track structure and primary modes of interaction. Monte Carlo track structure simulations have been used to calculate the frequency of energy deposition by radiations of high- and low-LET in target sizes similar to DNA and higher order genomic structure. Tracks of monoenergetic heavy ions and electrons were constructed by following the molecular interaction-by-interaction histories of the particles down to 10 eV. Subsequently, geometrical models of these assumed biological targets were randomly exposed to the radiation tracks and the frequency of energy depositions obtained were normalized to unit dose in unit density liquid water (l0(3) kg m-3). From these data and a more sophisticated model of the DNA, absolute yields of both single- and double-strand breaks expressed in number of breaks per dalton per Gray were obtained and compared with the measured yields. The relative biological effectiveness (RBE) for energy depositions in cylindrical targets has been calculated using 100 keV electrons as the reference radiation assuming the electron track-ends contribution is similar to that in 250 kV X-ray or Co60 gamma-ray irradiations.     

Calibration techniques for magnetometers implementing on-board de-spinning algorithms

The Fluxgate Magnetometer experiments on-board the European Space Agency’s four spacecraft Cluster Mission have the capability to store sampled magnetic field vectors in the instrument memory, either as a full resolution ‘event capture’ or as spin-resolution vectors transformed into a non-spinning co-ordinate system (de-spun). The latter capability has ensured a dataset is available which extends the partial orbital coverage achieved during nominal operations in the first years of operation. The on-board de-spin is achieved using a Walsh function with Haar coefficients and allows for up to 27 h additional data per non-coverage interval. A number of commissioning orbits were used to verify the accuracy of data collected by the de-spin mode, whereby individual spacecraft were operated separately in a number of standard normal sampling and de-spin mode combinations. Up to the present time, this data has not been available to the Cluster community. We present results here comparing the performance of the on-board de-spin algorithm versus the normal sampling modes over a number of boundary layer crossings, describe the techniques used for calibration and timeline recovery, and outline the context in which the data may be usable in future studies.     

Results from the ESA SREM monitors and comparison with existing radiation belt models

The Standard Radiation Environment Monitor (SREM) is a simple particle detector developed for wide application on ESA satellites. It measures high-energy protons and electrons of the space environment with a 20° angular resolution and limited spectral information. Of the ten SREMs that have been manufactured, four have so far flown. The first model on STRV-1c functioned well until an early spacecraft failure. The other three are on-board, the ESA spacecraft INTEGRAL, ROSETTA and PROBA-1. Another model is flying on GIOVE-B, launched in April 2008 with three L-2 science missions to follow: both Herschel and Planck in 2008, and GAIA in 2011). The diverse orbits of these spacecraft and the common calibration of the monitors provides a unique dataset covering a wide range of B-L* space, providing a direct comparison of the radiation levels in the belts at different locations, and the effects of geomagnetic shielding. Data from the PROBA/SREM and INTEGRAL/IREM are compared with existing radiation belt models.     

Space telescope studies of Jupiter and Saturn simulated by Voyager observations

Space Telescope (ST) observations of Jupiter and Saturn will offer a unique opportunity for monitoring their changing meteorological characteristics. They will provide higher spatial and temporal resolution for composition and vertical structure studies than have been available to date. We have simulated the planetary camera observations of Jupiter and Saturn by Voyager images of the appropriate spatial scale. With this data set we have investigated the meteorological properties of these atmospheres which can be studied at these scales. In addition we have considered the advances obtainable with the high resolution spectrometer on ST compared with observations from ground-based and other Earth-orbiting satellites. These studies will provide insight into the scientific gain and possible problems in the use of ST for planetary studies.     

Performance and reliability of the NASA Biomass Production Chamber.

The Biomass Production Chamber (BPC) at the Kennedy Space Center is part of the Controlled Ecological Life Support System (CELSS) Breadboard Project. Plants are grown in a closed environment in an effort to quantify their contributions to the requirements for life support. Performance of this system is described. Also, in building this system, data from component and subsystem failures are being recorded. These data are used to identify problem areas in the design and implementation. The techniques used to measure the reliability will be useful in the design and construction of future CELSS. Possible methods for determining the reliability of a green plant, the primary component of a CELSS, are discussed.     

Cognitive deficits induced by 56Fe radiation exposure.

Exposing rats to particles of high energy and charge (e.g., 56Fe) disrupts neuronal systems and the behaviors mediated by them; these adverse behavioral and neuronal effects are similar to those seen in aged animals. Because cognition declines with age, and our previous study showed that radiation disrupted Morris water maze spatial learning and memory performance, the present study used an 8-arm radial maze (RAM) to further test the cognitive behavioral consequences of radiation exposure. Control rats or rats exposed to whole-body irradiation with 1.0 Gy of 1 GeV/n high-energy 56Fe particles (delivered at the alternating gradient synchrotron at Brookhaven National Laboratory) were tested nine months following exposure. Radiation adversely affected RAM performance, and the changes seen parallel those of aging. Irradiated animals entered baited arms during the first 4 choices significantly less than did controls, produced their first error sooner, and also tended to make more errors as measured by re-entries into non-baited arms. These results show that irradiation with high-energy particles produces age-like decrements in cognitive behavior that may impair the ability of astronauts to perform critical tasks during long-term space travel beyond the magnetosphere.     

A program to measure new energetic particle nuclear interaction cross sections.

The Transport Collaboration, consisting of researchers from institutions in France, Germany, Italy and the USA, has established a program to make new measurements of nuclear interaction cross sections for heavy projectiles (Z > or = 2) in targets of liquid H2, He and heavier materials. Such cross sections directly affect calculations of galactic and solar cosmic ray transport through matter and are needed for accurate radiation hazard assessment. To date, the collaboration has obtained data using the LBL Bevalac HISS facility with 20 projectiles from 4He to 58Ni in the energy range 393-910 MeV/nucleon. Preliminary results from the analysis of these data are presented here and compared to other measurements and to cross section prediction formulae.     

Guiding technology development and transition into productsresponsive to end-user needs

It is argued that a systems engineering process that develops an understanding of end-user needs and economically develops a product system which includes the right technology advances to satisfy these needs is the best way to ensure success in the market of end-user needs. This customer pulled approach to new and improved products also pulls the necessary technology developments with it and integrates their timing and resource requirements into those of the end product planning. With appropriate concurrent, cross-functional teams working both the planning and the execution, this approach benefits from the wisdom and leadership of the end-user focused team to deliver the desired program results on schedule. This frees top leadership to focus on longer range visions for the product line and technologies